Im looking for adaptation in order to do this very same load balance with only 2 interfaces for the WANS. I have 2 WANS behind a PTP and another 2 WANS behind another PTP. The thing is; I have done that in the past but i cant remember how I did all the markings by IP instead of by interface.

Many different versions for both RBs and Winboxes. My main RB is a CCR1009-8G-1S and the current firmware is 3.22, v.6.28 It also happens with the RBs 750 V6.18 and the HAP Lite v6.34.2 I tried the winbox's version from the mikrotik.com site and the versions I downloaded from every one of my RB, eve...

I have 9 rbs in my network and suddenly I stopped being able to do somethings like changing a port in a dstnat rule. My user have full access to every one of these rbs, there is like 4 different models of rbs in my network and every one of it have that limitation now. I cant to change ports if Im cr...

Googlable easily.

every search i did on the subject sent me to links related to the Windows client and nothing else.

tracert.png RB is autenticating through PPPOE to a DSL MODEM in bridge mode, and NATing to my internal LAN. Whenever I ask the RB to tracert a domain it works properly but when the tracert is performed by the client, the response times of the points between the RB and the destination are huge. Stra...

email to support@mikrotik.com and explain in short, that you upgraded to v6 and lost key. indicate the purchased SoftID and the current SoftID

How much time it takes for them to respond, usually? As you know I dont have much time, and I got no answer at all until now, only an automated reply.

I just found the old Software ID and the Software Key sent to me. A very very very old email, haha. How can we proceed?

Ok, I managed to get it back to work with a CD I used on another machine a few months ago. Its not the latest version, its the 6.27 one. Restored the configuration with a backup file, and its working. But the License Issue persists. Heres the screen shot: key mkt.jpg I dont know if the software ID s...

I will to do a fresh restart using a CD image then. All I get actually is this:

I pasted the v6.30.1 into the files directory, rebooted the PC and after the entering winbox I got a msg about license issues. I Looked at the system>license tab and there was an ID number, License lvl = 0, and blank spaces for the rest. I re rebooted to get a print-screen of that first window to pa...

Wont I get any problem? If I install the v6.30.1 will it work properly, as a 5x version? Wont it ask me to install a new license in 24h or something like that? Its a running system and I cant take the risk of it stopping to work.

The current version of this specific machine running MKT is 3.23 but my license is a lvl 5 one, upgradeable to v5.x . I want to upgrade it to the license's newest possible version, which must be 5.something. I dont know whats the newest v5 and I cant find it in MKT's download page. Id like the help ...

Add the dst-address or in-interface parameter to the rules, this could solve your issue. Have you Steam and using it? Honestly no but I assumed this is 'normal' natting. With the rules given, all packets will be dst-natted, inbound and outbound. That's why I thought about specifying in-interface co...

I use Steam for play ;) The username on steam are the same as here... ;) You do not need to open anything, do not do any, remove all your rule, are all wrong, simply enable UPNP on Routerboard and configure it correctly ;) This is my UPNP config, I never have one game that not work with that: /ip u...

Steam's page says the following: Steam Client UDP 27000 to 27015 inclusive (Game client traffic) UDP 27015 to 27030 inclusive (Typically Matchmaking and HLTV) TCP 27014 to 27050 inclusive (Steam downloads) UDP 4380 Then I did the following rules 14 chain=dstnat action=dst-nat to-addresses=192.168.75...

Theres a long time since the last time I installed the OS from the ground, wont I need to buy a new licence in order to install it on a new HDD/flashdrive?

Even if theres a queue processing packets before these dynamic individual queues for each customer, shouldnt the packet get read and processed by the second queue after it got processed by the first one?

Some of my customers are using around twice the uploaded set to them, I know a few of them very well and I know they are using the bittorrent protocol to transmit files the whole day and I guess the bypassing of the queue rules is related with that protocol. The OS' version is 3.23. Its a Level 5 li...

I dunno if this is the correct thread or not, but here we go. My RB 450G just stoped working, Im accessing them by theirs serial doors trying to upload a new firmware to get them working. When I select the RB450G in the NetInstall and select all the packages in the list and click on "Install&qu...

I dont know if im asking on the right place, i havent found a more apropriated forum for it. A friend and partner is travelling trough Germany and is looking for a place to buy RBs and Cards, maybe Antennas aswell but he have no idea on where to look for. He tried the http://www.mikrotik-shop.de/ , ...