MikroTik

guilhermeramires

I have winbox running on my virtualized windows 11. How can I export/import my saved sessions to my Mac winbox version? I tried to copy the exported file and didn't work. I tried to renamed the exported file and didn't work as well.

Any tips?

guilhermeramires

I will be there for sure!! Missing these events!

Thanks for bringing them back S2!

guilhermeramires

Use ULAs instead of LL. No need to use filters or static this way.

guilhermeramires

But the one million dollars question is: This workaround to get x86_64 working on version 638.7 makes the system really works on 64 bits or its just a flag and fake data read? If yes, I need to remember Janisk reply about memory addressing speed loss and consider that it does not worth if you do not...

guilhermeramires

as we won't get ROSv7 anytime soon, anyone with knowledge how to crosscompile for the CCR platform and build a system to run quagga or similar?

But does it support multi thread? Last time I read quaggas docs it says that quagga is planned to support but so does not have the right libs for that...

guilhermeramires

+1 for dyndns script, 6.29.1!working and 6.30 broken more likely that your script is broken. scripting language improves over time, the scripts need to be updated. MikroTik did not make th DynDNS script, you have to ask the person who wrote it, or maybe post this question in the "Scripting&quo...

guilhermeramires

ARP=reply-only is not working on CCRs.

X86, MIPSBE and PPC is working fine.

guilhermeramires

You need to set SRC-ADDRESS if you want to reach the same result. I found a problem with the new traceroute tool. My backbone provider uses an MPLS network with private addresses and this means I can't 'see' the network from another router other than the border router. The new 'mtr' behaviour is sto...

guilhermeramires

There are a thousand of possibilities... Its a quite hard to debug wireless problems this way. First: you have to make a site survey to see how good is your scenario and make the right adjustments. Second: you need to make sure that all points are pretty tuned!! Network logic, cables, grounding stuf...

guilhermeramires

Have you tried AES encrypt instead of TKIP?

guilhermeramires

Normis,

Maybe it is not...

Seems like the new ethernet buffer optimization for CCR is causing the problem. When I started btest from CCR using direction=transmit and Local TX Speed=95Mbps test took 5 minutes and I saw no problem. When I changed Local TX Speed to 98Mbps the problem shows up!

guilhermeramires

Normis, Actually the problem is something about "management" process. I started test from 2 RBs 751 using direction=transmit and I saw no problem. But when I started test from one RB 751 using direction=receiving "management" process reaches 6% on CCR1016 and after 90 seconds the...

guilhermeramires

Normis, RC12 causes router reboot when traffic reaches around 200MB. Log message says: "router was rebooted without proper shutdown". I have one CCR1016 with 10 RB 751 plugged. When I btest from one RB 751 and traffic reaches 200MB the router reboot. when did you download rc12? it is bein...

guilhermeramires

90 seconds after bstest starts the router reboot.

I was testing with UDP traffic on both directions started from RB 751.

guilhermeramires

Normis,

RC12 causes router reboot when traffic reaches around 200MB. Log message says: "router was rebooted without proper shutdown".

I have one CCR1016 with 10 RB 751 plugged. When I btest from one RB 751 and traffic reaches 200MB the router reboot.

guilhermeramires

Normis,

Any information about fastpath in RB4xx series?

guilhermeramires

How many routers do you have? Probably its not necessary to create too many areas.
You also need to tells us each area types. Its all default or there is some stub area?

guilhermeramires

Actually it looks like a wrong entry in ip binding menu. Go to IP -> HotSpot -> Hosts and check if the DVR IP its with "P" flag .

guilhermeramires

As we can see in this video:

SXT CPE Installation guide: http://www.youtube.com/watch?v=-KNo1B7K-YY

When it will be available?

guilhermeramires

I tested those settings and I get between 2000-5000 addresses in lists as ddosed or ddoser. I have about 600 users all connected PPPOE. Is it a normal thing or something is wrong? Thanks in advance, Probably you have some nat mascared rules in the LAN. So all ip address come from only one host natt...

guilhermeramires

here is better link: http://wiki.mikrotik.com/wiki/Netinstall Ok. But where can I download netinstall? I go to http://wiki.mikrotik.com/wiki/Netinstall and than it gives me a link to http://www.mikrotik.com/download.html and there I only have a link to http://wiki.mikrotik.com/wiki/Netinstall ...

guilhermeramires

Only in the load balance RB.

guilhermeramires

brunoms86,

You don't need too much to this short link. If you didn't change default TX POWER try to low it at least to 10dbm in both sides and try again.
Keep in mind that -40 is not a good signal. There is too much power in your system. Always try to keep it around -60dbm, ok?

guilhermeramires

Sure you can. Here is the complete explanation to queues:
http://wiki.mikrotik.com/wiki/Queue

guilhermeramires

If you use walled garden it will not work fine. You must use IP BINDINGS to make the correct test.
Keep in mind that even this way hotspots has queue limits. Make sure that these are unlimited.

guilhermeramires

cursols, The problem is that you didn't create the INPUT and OUTPUT rules. This will ensure that if you connect through wan1 it will back through wan1. Like this: /ip firewall mangle add action=mark-connection chain=input disabled=no in-interface=WAN1 new-connection-mark=UP_01 passthrough=yes add ac...

guilhermeramires

The best solution is you use PCQ.
Check this link: http://wiki.mikrotik.com/wiki/Manual:Qu ... Q_Examples

This will fit perfect to your need.

guilhermeramires

You're welcome.

guilhermeramires

Hello sja,

2 questions:

1-Did you add mac/address of all people you want to authenticate?
2-Are these pcs in bridge together to the interface that hotspot listen?

guilhermeramires

Hi denis,

RB 433ah supports 1526 MPLS-MTU only in the ether1. Try to change it to 1522 in all devices to make sure that will work all the time.

Regards.

guilhermeramires

Upload is really easy. You need to create a ECMP route with check-gateway enabled. Just add both gateways in the same static route. The traffic will be share using round-robin every time source or destine address change. This way you can reach a good balance. Try it and tell us, ok?

guilhermeramires

Uncheck "Add default route" in your VPN client and add the default route manually. At this point do not use the IP address as gateway. Use the vpn interface as gateway.

This way you don't need to change the default route anymore, ok?

guilhermeramires

Keep you balance the way you are doing and you also can announce your /22 in both peers. If one peer goes down all traffic will be redirect to the other peer.

guilhermeramires

You only need the license L4. Thats enough to make BGP works, ok?

guilhermeramires

I guess you only need an ECMP default route with fail over enabled(check gateway) to solve this...

guilhermeramires

You can make an address list with all websites that provides this service and make a drop rule to this list.

guilhermeramires

Hi ammarih,

This is really simple. You just need to put the default route to the wan2 gateway and make a firewall src-nat pointing the ip address from wan1 gateway, ok?

guilhermeramires

Hi,

You can use packet marks from firewall mangle to give free access to this destine.

Thats the best way to solve this, ok?

guilhermeramires

Hi,

The default tx power is 17dbm and when you are using 2x2 you will get 3dbm extra and 200 meters is really close. Try to decrease TX power using card rates and set it to 7 dbm.

I guess it will solve your problem, ok?

guilhermeramires

You can use a VPLS instead of WDS. Its how it works to me.

guilhermeramires

What you mean when you say "incorrect data" ?

guilhermeramires

I have 2 problems with the new version. The first one is the DHCP-SERVER. It becomes "inactive" after some minutes and the only way to fix this is rebooting the router. The second is the DNS. Static entries and cache just gone and after some minutes the cpu reachs 100%. Once again the only...

Search found 42 matches