thank you

[admin@MikroTik] > /export # jan/01/1970 07:36:57 by RouterOS 3.22 # software id = V5JB-PTT # /interface ethernet set 0 arp=enabled auto-negotiation=yes comment="" disabled=no full-duplex=yes \ mac-address=00:0C:42:27:72:2C mtu=1500 name=ether1 speed=100Mbps /interface wireless security-pr...

Hy,

I did what you say and is not working for me.

i have internet on dhcp modem - i create dhcp client on wlan1 and dhcpserver on ether1 after that i make the nat masquerade out interface wlan1.

and is now working. i receive unidentified network.

ps: my wlan1 was conected to ess.

Thank you,

Thank you very much for your asnwers. i will try

i want this configuration:

Wireless card to be wireless client for an AP and from that to give on ethernet to have internet in my lan.

Thank you

for this configuration
Inernet -> Wlan1 client wireless -> eth1 dhcp server -> user

can you give an tutorial ?

i have only wlan1 and ether1.

Hello,
It is posible to make this configuration with 411R ?

Antena A ( wireless client) - Bridge - Antena B ( hotspot ) ?

Thank you and and if yes pls send tutorials

Metropolitan is the internet on my country and the extern is the internet international.

So you tell that is more good to make pppoe?than IP

Hello everyone, I have a problem with my network: RB 450G -> Switchs -> Clients i want to see the trafic for Extern and the trafic for Metropolitan. How can i do that? With BGP? If yes how can i do BGP un this product? The other problem is how is more good to give the bandwidth, on IP or on PPPoE ? ...

Hy, i want to make a server with RB450G to provide internet over an 150 clients and i want to know how can i make a very good configuration. I want to make bandwidth balancing ( How can i do this in mikrotik? ) I want to make bandwith limits over torrent protocol (How can i do this in mikrotik? ) I ...

thank you very much. i want to use this to a network with 150 clients maximum, ( now i dont have any clients the network is a project ) i realy want to work with this routers because i buy a lot of equipment like: Rb 450G , 6x 411 , 2x433ah, cisco switches ......

Nobody know ??????? Nobody have RB 450G ????

so ..... 3 MB, not Mb it will come to the rb450G and than 2 or 3 or 4 Mb, not MB i will have one client. structure : RB450G ( 3-4 MB, manage bandwidth over mac, filters ) -> cisco switches -> iptime switches -> clients (more than 150 -160 ) will work, whitout any crashes or reboot of the RB450G ??? ...

Hello can somebody tell me if this routerboard(RB450G) can manage bandwidth 3-4 MB, to more than 150-170 clients ? The routerboard configure with firewall, masquerade and all the things. It will work ? The structure of the network is: RB450G ( manage bandwidth over mac, filter, firewall) -> Switches...

HY, i do it with masquerade and input and its works. I am trying to make an isp server with bandwith balance and limit over mac adress. now if you can help me with this: bandwidth balance and limit over mac adress. My configuration: RB450G (bandwith balance and limit over MAC ) -> Switch Alied Teles...

Hello, how can i make the rb450g to work : eth1(gateway) -> eth2, 3, 4 ,5 (lan) without bridge, only in filters. If it is possible. ( Tutorial or something like this. ) .thank you

hy, i want to make a file.txt that can make my config much easier.
ex: the file.txt (with config text) to be boot at the startup.
i want to put the mac adress there with the bandwidth ( MAC - 10Mbps)

maybe a tutorial or a config file or something else to show me how to do it ?
Thank you

you must make bridge on the interface : ex: eth1 -> bridge -> eth2 ; eth1-> bridge-> eth3 . . . .
and a dhcp server on the interfaces eth2 eth3 eth4 .

hello, i have one question if i have: Bandwith 30 Mb > RB 450G > switches with management > clients ; do you think this configuration support more than 100-200 clients without crashes ? ( RB 450G with firewall, bandwith limited over mac, dhcp server, and other configuration). you guys think it will ...

1.sorry for my perseverence but if i make an firewall,bridge,ppoe connections and other configuration for 200 customers ,the rb450g its works great ? without crash.?

2. rb1000u how many customers with firewall bridge and ppoe conections will works ?
thank you .

ihernandez,
how many clients do you have on the rb1000 ? because i want to buy the rb1000u and i want to know how many clients it works with the rb1000u ( 300 clients 500 clients 1000 , 2000 clients ? how much ? ) thank you

esmolz,
can you tell me what equipment you use at your network and how many clients you have with that equipments?
thank you

if i make a ppoe server on eth3, eth4 with 150 clients 200clients you think it will work great, without any disruption and without falling down
(i want to make an isp with maxim 200 clienti)
thank you very much

hello,
how many clients/persson support the 450G
or the RB1000U ?

i have bandwith= 5MB and i want to put in this 150 - 200 clients with the bandwith limited on MAC and IP . does the 450G work with this configuration ?