yes, you can use EOIP bonding over ethernet cards. Also it is possible to use 4 or more ethernet cards.

Can the bonding be pumped up to 4 or more for ethernet

make supout file from router and send it to support@mikrotik.com Upgraded NO LUCK snmpwalk -v 1 -c public xxx.xxx.xxx.xxx Timeout: No Response from xxx.xxx.xxx.xxx [admin@xxxxxxxx] > snmp print enabled: yes snmp> community print # NAME ADDRESS READ-ACCESS 0 public 0.0.0.0/0 yes here are the packages...

then upgrade router to the latest version it should help Level3 but wireless is not installed The packages installed are # NAME VERSION BUILD-TIME UNINSTALL 0 system 2.8.18 oct/19/2004 11:15:40 no 1 advanced-tools 2.8.18 oct/15/2004 13:45:39 no 2 gps 2.8.18 oct/15/2004 14:42:27 no 3 lcd 2.8.18 oct/1...

Probably you have level 3 and wireless installed. So remove wireless package and SNMP will work Using 2.8.18 SNMP does not work ! doing an nmap from a machine behind the router shows its filtered below are the details. And I am using xxxxxxxx as the community name via snmpwalk and snmpget . [admin@g...

you should check your wine configuration to see there it is store all configuration. Look in your home directory .wine/config I was using winbox on linux via WINE, and it was working great until I upgraded my MT routers to 2.8.21.. Now winbox starts to connect then fails/closes before getting to the...

it will be possible in 2.9 version is it possible to have interfaces enabled after reset? Now it's necessary to connect to serial port (which means openning of outdoor box as in our case). If we had the Ethernet interface enabled by default it would be much easier to access via mac-telnet, which is ...

You can reset your router configuration by typing following command: /system reset But this will delete ip addresses also. For this moment there is no way to reset router without loosing ip addresses, too. There is some way of reset the router to the default values but without then it is necessary t...

Did you look here? http://www.mikrotik.com/docs/ros/2.8/guide/netinstall.frameset :) I would like to suggest some more documentation on NetInstall. I had some problems, and found this page http://64.233.179.104/search?q=cache:8CpDqpF_oA0J:www.sdwug.org/proj/ConfigMikroTik%3Fversion%3D5+Mikrotik+net+...

For getting SNMP response, you should enable snmp service in /snmp, also add community name. Please show what you have here: /ip address print I recently installed a routerboard with 2.8.18. The router is connected to the internet via the PUB interface using a non-routable IP block 172.18.1.2 -> 127...

Now policy routing looks different. To set up it, you should do following: In Firewall mangle you should mark flow for which you want change gateway. For example you want all traffic which comes from 4.4.4.2 to 1.1.1.0/24 network pass through 2.2.2.2 gateway. [admin@mikrotik] ip firewall mangle> pr ...

Check your license level. If it is level3 or level1 and you have wireless installed, then just remove wireless package and snmp will work. We are receiving these error messages after update to V2.8.19 How can we solve this problem. [admin@xxxxxx] > /snmp [admin@xxxxxx] snmp> set enabled=yes contact=...

If you have ftp connection to this router, you can upgrade your router through it. Just simple download packages from mikrotik website, then select needed packages and upload them to that router with ftp in binary mode. Then just reboot your router. You can make backup file and download it to local ...

which version you are using? what type of hardware? please send supout file to support.

enter : system shutdown
when kill process, computer is dead

but reboot ok? why?

No, it's not possible. Only way is to reinstall not saving password.

Is it possible to recovery a lost password?

Thank you

something is already in beta6, but it will be changed (arguments parameters) in beta7, so you should wait beta7.
It will be different from version 2.8

Can somebody tell me how it to implement load balancing in Mk beta?
I have two xDSL line.

it's not possible to reset admin password. Only reinstall will help. Reinstall it with netinstall and do not safe old configuration. You should not lost your license. A long time ago, before i bought routerboard from mikrotik. I have downloaded software with a lisense key and installed on my pc. Sin...

you can use winbox in linux, too. You can run it with wine.

Winbox is a good tool for windows.
Mikrotik has the same tool for linux ??

please read OSPF manual. OSPF works fine and you should not turn you attention to Io routes. I think OSPF may be broken in 2.8.11 as far as some functionality: From the Mikrotik Docs for 2.8.11 OSPF: "There can be Point-to-Point networks or Multi-Access networks. Multi-Access network can be a b...

it is possible to use "expect" language in linux for this puproses. Fine, But is it possible from the php/apache web page (when we know persons remote ip address) to check (for example /ip firewall rule forward ) src-mac-address and display it on the screen. Or - send back information to t...

You should upgrade router to 2.8.13. Check with snmpget or snmpwalk is your router responsing to your requests. I am trying to use cricket to hook into an interface for traffic data. When I put in the OIDs that were returned by "print OID" and run the collection script of cricket I'm told ...

please send supout files from routerboards and network diagram to support@mikrotik.com

you can't do it.

How can I tell mikrotik (2.8.11) not to announce routing to private
nets (10.0.x.x) to other routers via OSPF?

Here you can find MRTG configuration examples:
http://www.mikrotik.com/docs/ros/2.8/appex/mrtg1.main

Did you tried snmp-get with -v1 option? Because RouterOS supports SNMP version 1, but some Linux distributives by default tries to use SNMP version 2.