MikroTik

MRMISSY

/ip firewall nat add action=redirect chain=dstnat comment="" disabled=no dst-address-type="" \ protocol=tcp src-address-list=facebook to-ports=9999 before i say it work or not where i should find it dst-address-type="" \ Thanks in advance I did not got you dst-address-...

MRMISSY

try this create a profile with address-list where the Facebook is blocked then add user to this profile please follow this /ip hotspot user profile add address-list=facebook idle-timeout=none keepalive-timeout=2m name=blocked \ shared-users=1 status-autorefresh=1m transparent-proxy=no /ip firewall n...

MRMISSY

hi after reviewing the WIKI regarding MTU http://wiki.mikrotik.com/wiki/Manual:Maximum_Transmission_Unit_on_RouterBoards I found that the default MTU is 1500 for all the interfaces with different L2MTU values. what if I increase the MTU to the L2MTU values ? what will happened ? fragmentation of the...

MRMISSY

Still problem in UserManager, as I said before after rebooting the MikroTik, for a while "Time Left" and "Total Time Left" shown correctly, after 5 mins this data starts to disappearing from USER page in UserManager, I'm wondering why Mikrotik doesn't solve this BIG problem from...

MRMISSY

dfs-mode (no-radar-detect | none | radar-detec; Default: none) Controls DFS (Dynamic Frequency Selection). none - disables DFS. no-radar-detect - Select channel from scan-list with the lowest number of detected networks. In 'wds-slave' mode this setting has no effect. radar-detect - Select channel w...

MRMISSY

USE DFS MODE IN ANTENNA
that will choose the best channel

متابعك

MRMISSY

hahahaha

happened to me today
beat you Ibersystems

MRMISSY

DDDD:

MRMISSY

thaks alot , is there a way to limit the connection of download programs iam suffering from alot of connection for only one file please i want to understand some rules that drop the connection depending on the type of the files you can add more types like pdf,wav .....etc /ip firewall filter add ac...

MRMISSY

the best (at least to my knowledge) and the cheapest solution for wireless 5 GHz is omni 12 DBi antenna NOT True! It is the cheapest solution. For 300 users an omni means one AP and you'll find it almost impossible to have one AP serving 300 demanding customers. Your network will be a mess. the pra...

MRMISSY

the best (at least to my knowledge) and the cheapest solution for wireless 5 GHz is omni 12 DBi antenna try this http://www.l-com.com/item.aspx?id=20576 if you want better but expensive solution use sector the practical is 2 sectors or 3 sectors antenna as if you add more than 3 you will have interf...

MRMISSY

that is nice
thanks for sheering

MRMISSY

MRMISSY

If you want to share the combined capacity of the two adsl lines you first have to arrange that second line to reach the hotspot/main distribution server. Use a separate physical connection for that. You don't want data to travel up and down your back hauls twice. After that you then have several o...

MRMISSY

network.png thanks for replay simply i have hotspot server in the main server (1 main board) with xr2 omni antenna for clients then xr5 directional antenna to an other xr5 station wds which connected to the second board (2) all port are bridged then connected to third board (3) by lan ether which i...

MRMISSY

I'm newbie
please help
i want to tunnel the second line to the server

MRMISSY

I have been facing the same problem for sometime in one ap
solution?
it is power issue so, decrease the tx power of the wireless by 2 dbm and see
suggestion?
replace the package of wireless nv2 to wireless only

MRMISSY

I'm not a prof !!!!
anyhow if u are using hotspot just remove the cookie and give the 2 PC same name & pass
one will work till timeout then the second can log in

MRMISSY

i don't know could this do the trick by setting icmp inside the bandwidth in higher priority please keep it before any managle rule that can not be passthough add action=set-priority chain=prerouting comment=ICMP disabled=no new-priority=1 passthrough=yes protocol=\ icmp add action=set-priority chai...

MRMISSY

either add new dhcp server on wlan 2 with natting
or make bridge , add both lan (ether1) and wlan 2 as port
and make the dhcp server on the bridge
after resting the configuration

MRMISSY

ANY suggestions ?

MRMISSY

please check your modem data
i feel that you have dsl problem more than mikrotik setup
check for Line Attenuation & SN Margin
notice any changed between normal ping and high one

MRMISSY

MRMISSY

OMG
UP

MRMISSY

HELP PLEASE !

MRMISSY

hi
I have small ISP with around 40 users
see the pic

PLEASE
advice to separate users on the 2 wan
with centralized hotspot with radius in the server

thanks

MRMISSY

HI
these rules give different priority for each port alone when they bridged together
during the communication with server
or as far as I understood

MRMISSY

try this example I put ether2 in higher priority /interface bridge filter add action=set-priority chain=forward comment="" disabled=no in-interface=ether2 new-priority=1 passthrough=no add action=set-priority chain=forward comment="" disabled=no new-priority=1 out-interface=ether...

MRMISSY

UP
need help also

MRMISSY

I've done a presentation about this idea on my training course:
QoS on Wireless Links.pdf

thank you
i was looking for that for long time

MRMISSY

HI NEED OF GREAT HELP I HAVE HOTSPOT SYSTEM (DHCP) SOME OF MY CLIENTS USE VPN CONNECTION TO REMOTE SITE THE PROBLEM THAT ONCE THEY TRY TO DO VPN CONNECTION THEY ARE DISCONNECTED FROM THE NETWORK this my firewall please help [admin@M1] /ip firewall> export # jul/21/2010 18:45:40 by RouterOS 4.10 /ip ...

MRMISSY

no one ?

MRMISSY

hi all I noticed some of my clients are using proxy programmes like hotspot shield ,jap, utrasurf ...ect it will be ok if the user is alone in the network but if others join then problems started of disconnection of most of the users would anybody explain that how to correct this disconnection thank...

MRMISSY

HI ALL PLEASE HELP I HAVE ALL MY CLIENTS SURFING THROUGH LAYER 7 FOR MAX NET SURFING SOME ARE USING SPECIAL PROGRAMME "HOTSPOT SHIELD" IF ONE USER DO SO HOW CAN I CANCEL THE QUEUES FOR THE LAYER 7 FOR THAT USER ONLY & KEEP HIS ORGINAL QUEUE WITHOUT INTERFERING OTHER USERS THANKS SORRY ...

MRMISSY

THANKS ALLOT siscom
IT'S REALLY VALID POINT
ANY HOW I CHECKED THE POWER IN THE BOARD THE MAX 22 V
I'M USING POE

MRMISSY

last attachment

MRMISSY

any one can help
please check attachments

MRMISSY

here my NETWORK I have two points Point A 1- Mikrotik board RB 433 AH WITH SD MEMORY CARD CONNECTED TO XR 2 CARD TO OMNI 15 DB ANTENNA XR 5 CARD TO HYPERLINK GRID ANTENNA 30 DB DIRECTED TO POINT B I HAVE THE DSL LINE 20 MG BYTE HERE I SETUP THE ETHER 1 FOR WAN IP 10.0.0.1 BRIDGE FOR ALL OTHER ETHER ...

MRMISSY

here my NETWORK I have two points Point A 1- Mikrotik board RB 433 AH WITH SD MEMORY CARD CONNECTED TO XR 2 CARD TO OMNI 15 DB ANTENNA XR 5 CARD TO HYPERLINK GRID ANTENNA 30 DB DIRECTED TO POINT B I HAVE THE DSL LINE 20 MG BYTE HERE I SETUP THE ETHER 1 FOR WAN IP 10.0.0.1 BRIDGE FOR ALL OTHER ETHER ...

MRMISSY

here my NETWORK I have two points Point A 1- Mikrotik board RB 433 AH WITH SD MEMORY CARD CONNECTED TO XR 2 CARD TO OMNI 15 DB ANTENNA XR 5 CARD TO HYPERLINK GRID ANTENNA 30 DB DIRECTED TO POINT B I HAVE THE DSL LINE 20 MG BYTE HERE I SETUP THE ETHER 1 FOR WAN IP 10.0.0.1 BRIDGE FOR ALL OTHER ETHER ...

MRMISSY

hi all it's really upset me to have so many problems with my network i consulted three consultants but no much help from them really i don't know are my problem so complicated or i'm just Low I.Q even i asked the mikrotik support and the give help but the same problems recurs would any body will hel...

MRMISSY

hi all it's really upset me to have so many problems with my network i consulted three consultants but no much help from them really i don't know are my problem so complicated or i'm just Low I.Q even i asked the mikrotik support and the give help but the same problems recurs would any body will hel...

MRMISSY

any one

MRMISSY

HI I need to run a script (showing a web page for the ending the limit )for reminding the user he is about end his subscription if less than 1 day every 30 min based on session time left for each user in the hotspot (active) I am using usermanger V3 I don not have profiles in my hotspot please help ...

Search found 44 matches