tnx a lot -))) traffic is unpayed customer redirect to 8080 proxy than to gateway -own cabinet

hi, need advice with traffic, a lot packets on gateway from a gateway. Hotspot present. what is this???

hi guys, im try get information how connect weatherstation via USB & mikrotik and send data to server. Maybe somebody know -)))

now, im have http://weather.bios-computer.com/web/infos.htm + cumulus software and windows PC, station on roof of office

hi, im have bug with x86 from 6.13-6.24 with MTU on Intel® 82583V GbE Controller on L1 is 1500, L2 cant change but show 9014, now, im try set L1 1504-1508-15018-1522-1550 - nothing cant help.... maybe somebody know how fix problem..... ??? MTU bigger than 1500 not working.... last good work version ...

I have problems in address-lists and dhcp from 6.19 and all higher versions later. I submitted a report of the problem (Ticket#2014110466000984) to the v6.21.1. I tested the new version 6.22 right now and surprise: nothing has changed. I have heard people talk here in "BugOS" to refer to ...

Which ROS version?

from version to version the same.... begins from change in nssa OSPF maybe 6.4
translator is always on - only on connected to backbone nssa router

nssa network area connected to backbone, in nssa lot customers networks is like 192.168.00.00/25 on pppoe server network is on bridge-local and using filter for ospf out for /32 adresses BUG: after reboot routers customer network sometimes become invisible from backbone swithchig on/off nssa area fi...

If you can, use one serial cable to reset bios (the only point where cpu speed are stored) after reset, chose inside the bios (on serial port) the wanted speed. The 1000 must run at 1333MHz with default 512MB on board. THX for advice..... im read manual .... opening box rb1000 set DIN correctly and...

im just look on my rb 1000 and see frequency 1500mhz, so try put 1000 and receive massege "no supported change frequency" only 1500 .... im try older version mikrotik 6.20 6.10 5.20 5.10 5 and the same situation so firmware is 2.30 always ..... please give advice how to set 1000!!!!!!!!!!!

im have troubles with bridges - bridge become unknown, reboot fix problem....

where download link 6.12 is already fixed????

im have strange bug from 6.5-6.9 on 6.4 all is well
onetime double traffic each 40-50 sec. on interfaces using ospf+mpls, no difference track system on or off mtu is 1518 or 1508, double traffic is only on transport ports.... on whole types on MT boards without difference where to use....

im have strange bug from 6.5-6.8rc1
on 6.4 all is well

double traffic per minute. using ospf+mpls, no difference track system
on or off mtu is 1518 or 1508, double traffic is only on transport
port....

what about OSPF -nssa stability ? is that fixed? One known nssa problem was fixed several versions ago, so please be more specific on problem description. connected network on nssa (redistribute connected on) become unreachable, default route on nssa present, translator always on but dont know wher...

what about OSPF -nssa stability ? is that fixed?

rb1000 - rc13 - kernel failure and rebooted .... back to 5.24

a lot mips working well

hi, guys, we had something the same, try leave only chap and encryption=no

BUG with max mtu migrating to 5.6 -( but statistics works, im see only FCS errors -) so maximum MTU in mpls configuration is 1500

We found a bug in statistics and we will fix it. Let us know whether there are problems with throughput or latency. present problems with throughput, im cant access via winbox on remote 433ah over 1200, (im think trouble with mtu in MPLS ) horewer mpls and ospf is up, mactelnet is work, so a lot lo...

I don't understand what you are trying to do? please make a network diagram of how you connected. Maybe we simply misunderstood you.

im try build like this

Why do you plug in PoE into RB1200 ports 7 and 8? RB1200 does not support PoE this is so bad, im was in planing concentrate seven remote 100 mbit devices Powered by PoE ( before was 493ah and was to slow and slow Out only 100 mbit) as, im understand, im cant do this task? and your rec is 493G ? im ...

What do you mean by POE in this case? RB1200 cannot be powered with PoE.

im mean, connect to 1200 - 100 mbit Rb 411Ah over POE on eth7 and eth8

hi guys, im just receive new rb1200 installing 5.5

doing configurations and receive o lot errors on 100 mbit ports with POE + MPLS, before upgrade all working fine on rb493 -(


any rec ?

use Radius manager v 3.9 it is support CoA

ospf+nbma+mpls - bug in nbma mode -not send hello packet im have around 1K routes distributed by OSPF nbma method, neighbor stil active but MPLS is lost. in Debug mode in not freeze router im dont see any hello packet to lost node. After reboot freeze router all working done day or two. When im goin...

What's new in 5.2 (2011-Apr-26 16:09): *) fixed webfig; *) console - fixed problem with supout file generation and export that appeared in version 5.1, it was causing console to enter busy loop on some boards; *) ssh client - added source address and remote command options; *) user manager - added ...

BUG - PPPoE server queues not working too.... all customers without limits....

sometimes frezze rb 493 we lost access from radio and Eth intefaces, after turn on/off reboot all works fine that was happen 3 times per week
http://www.bios.if.ua/pdf/mikrotik/autosupout.rif

im need to get all statistics about Ubiquiti device in Dude? any recommendations?

they will appear here after the MUM is done:
http://wiki.mikrotik.com/wiki/MUM_2010_US

so, we all waiting for presentations, now only one cool photo http://www.wpanoramie.pl/mum2010/

thx, presentations?

yes, it will be great technology. We are comming from VSAT and here was good explanation http://www.satsig.net/vsat-equipment/td ... nation.htm