An unexpected update: the mysterious signal disappears when I disconnect the SFP module from the router.

The router RB4011iGS+5HacQ2HnD is making the spectral scans. From what I can tell, it does not emit while doing that.

Hi, I'd like your help with understanding the following WiFi issue concerning my RB4011iGS+5HacQ2HnD with a Atheros AR9300 2.4 GHz chip. How it started The WiFi connection between a laptop and the router was very bad over 2.4 GHz. Pings of around 1000ms even with the laptop 1m away from the router. ...

So far I was unable to manually reproduce the problem.
I'll upgrade RouterOS and wait for it to happen again, should it happen again.

Hello Sometimes my RB750G suddenly stops working. All ethernet leds go off, only the power led remains on. I can't connect to the router during this time. It comes back alive only after I unplug it and plug it back in. The log only mentions that the router was rebooted without a proper shutdown. Wha...

Why can't I remove the following store? [admin@MikroTik] /store> print Flags: X - disabled, A - active # NAME TYPE DISK STATUS 0 A web-proxy1 web-proxy system active [admin@MikroTik] /store> disable web-proxy1 store is used [admin@MikroTik] /store> remove web-proxy1 store is used The webproxy is not...

In the store list I have one called web-proxy1. It was probably created when I tried out the web-proxy for a few minutes after buying the router. [admin@MikroTik] /store> print Flags: X - disabled, A - active # NAME TYPE DISK STATUS 0 A web-proxy1 web-proxy system active However I can't disable/remo...

I didn't change the configuration since then (I'm using the router at home with only a few PC's behind it), nor do I log the a file. I also don't have any wireless devices [admin@MikroTik] /ip proxy> print enabled: no src-address: 0.0.0.0 port: 8080 parent-proxy: 0.0.0.0 parent-proxy-port: 0 cache-a...

I'm not using any of them.

Nope.
Admin is the only user.

Hello

I have a RB750G running RouterOS v4.16. Since the last reboot (18 days ago) I have about 3 million sector writes (Total 11 mil). What could be causing them?
NTP Client active, Logging settings default. The log only show's when I've connected via winbox.

I have a couple of questions regarding openvpn in mikrotik: 1) Should each client have a different certificate and username/password or should all of them have the same certificate and a different username/password? 2) If I use different certificates for each client and a different username what do ...