Try setting proxy-arp on the lan interface, not the gateway.

I saw ARP was "enabled" ... I didn't realize that it should be "Proxy-ARP" ...

Thanks. You're a life saver.

Anyone? I can't believe that there is no response! I'm running ROS 6.03 I am using either PPTP or L2TP. I followed the examples found online to the "T" I even tried clear config and remake. Remote user cannot access anything on the inside. As far as I can tell, all the firewall rules are &...

Perhaps it is because of too much coffee and too little sleep but no matter what, I can't seem to get a VPN to work. Here's the export compact: exportcompact.txt In short I have one computer on the outside and it is trying to L2TP or PPTP in so that it can access resources on the network (printers, ...

Minor detail -- the NetInstall on the download page links to the 5.17 not the 5.18 net install.

Anyone have experience with Dual WAN on a Mikrotik? I could really use the help here... What other information can I post so that we can get this fixed and have a happy client here?

Thanks!

MD

Hi & Thanks for the help, I have something that I can't quite figure out. I followed all the per packet dual wan instructions that I found on the Wiki and in these forums. From the inside going out, everything works great. But when I activate the two 0.0.0.0/0 routes with the Routing Marks added...

I'm amazed it works at all

Thanks for the info. One big power supply on the way.

MD

Thanks for the reply. Any idea what the power requirements are for a 433AH with two cards in it? I don't have a larger power supply so I would have to buy one from monoprice or somewhere ... Before buying one I want to buy the correct one.

Many fundamental changes (kernel upgrade) so it will take a few more days. Probably next week. Translation: We're too busy playing Diablo 3. Check again after we hit level 60 and finish inferno mode. :twisted: j/k ... I'm sure they're hard at work putting in lots of awesomeness into this and it tak...

Hi folks, I have a Routerboard 433ah with two R52n. One is configured for bridge / NV2 with another routerboard over 5ghz A. The other is configured for AP on 2ghz. When there gets to be a bit of traffic (about 20mb a second on one, and 50mb a second on the other) the router likes to reboot by itsel...

mindragon I think most folks want the router to be a secure router and not a hackable web server... 1. Hotspot is based on web server - as you told if you use it your router is hackable web server, right ? But the hotspot is an HTML-based system with very limited scripting capability. Compare this ...

Isn't something like this possible with Metarouter / OpenWRT / Apache?

In any case...I think most folks want the router to be a secure router and not a hackable web server...

MD

There were no packaged NPK files for 6.0b1 but I copied up all the individual files that were on my router (system -> packages). Rebooted and ran a speed test. Looks great at 75 down / 5 up to my ISP. (I'm paying for 20 down / 2 up). Wireless bridge to a 5.14 router works just fine. The new quickset...

It sure would be nice... But it's not even in MT 6.0a1, although they do have support for "advanced channels"... http://mum.mikrotik.com/presentations/PL12/workshop-wireless-2012-PL.pdf About 2/3 way down he shows a spectral scan from the Dude. It would be so nice to have it built into the...

To quote a very good acquaintance of mine, Derek Smart, "It will be ready when it's ready and right now, it ain't ready."

MD

PRO TIP: If you're going to announce that 5.7 is a gazillion times better at routing, announce a release date at the same time. Otherwise, don't tease us and then don't deliver. It's like going to a club and seeing this hot chick drinking the beer that you like and then finding out that not only is ...

Okay...so I re-read everything on how to setup an 802.11n transparent bridge properly. Turns out that with NV2 it is best to use AP Bridge + WDS on one side and Station WDS on the other. For whatever reason the other way that I was doing the point to point bridge didn't work at all. Best method to f...

I'm having stability issues with 5.0RC9 and a 493AH with one R52n using any mode (802.11, NV2 or anything in bridge mode) ... After about an hour or two it will lock up completely requiring a power off / power on. Anyone else having a stability issue?

Voip issues with 5.0rc9 (upgraded from 4.16). Although bandwidth tests and pings look ok, we are getting more and more calls coming in from clients on our wireless network that says either VoIP call quality is bad or that calls drop. Anyone else have this? On 4.16 all was fine, since upgrade this s...

Now I have trubbles to restrore 5.0rc5, because access via MAC works unstable, when I try to upload package, it uploads about 400-500 kbytes, stops, and winbox disconnects. I would go with RC7 that was pretty stable. Best way to upload a file (restore old config) is via console + net install + main...

Drat. I guess it's too late now to downgrade. I'm running the RC9 that I received from Sergejs. It is from today but it doesn't have the -pre label. It does fix a couple of the lack of wireless issues that I had. Well heck, I'll run it now and see how long it runs for.

MD

The WiFi seems slightly borked in RC8 I have a WiFi access point. Under RC7 with no changes, the PS3 connects fine no problem. RC8 Breaks. The device is a 493AH with an R52n card doing the AP. I have it set to 802.11b+g After the upgrade to RC8, my NV2 bridge broke. I had to set it back to 802.11 mo...

http://demo2.mt.lv/ has RC8

Can't wait!

Most developers I know will quote you something similar to what an old developer friend of mine (Derek Smart) would say when prompted with such a question.

"It will be ready when it is ready and right now, it isn't ready"

MD

linksys WRT54GS do it have an open source software. and what is the software for programing this routers ?????????????? ?????????????? ?????????????? ?????????????? ?????????????? ?????????????? ?????????????? ?????????????? ?????????????? ?????????????? ?????????????? :? Your best bet would be to ...

Any ideas when DHCPv6 will be implemented?

4.7 on an RB1000 with a 300 node IPSEC / OSPF VPN also causes an immediate 100% CPU pegging and ultimately crashes.

I see it has been pulled from the main site already.

Support for the VMWare SCSI drivers would be nice.