MikroTik

dejanb

Can you post: /ip hotspot export Sorry, problem with markup. /ip hotspot profile add dns-name=auth.wifi.mysite.me hotspot-address=172.17.9.1 login-by=mac,mac-cookie mac-auth-mode=mac-as-username-and-password name=hsprof1 radius-accounting=no use-radius=yes /ip hotspot add address-pool=default-dhcp ...

dejanb

... brigdge, use ip firewall enabled ... Any reason for it? It's for running otherwise bridged packets through IP firewall, and from your description it doesn't seem like you use it for anything. No reason, i tried both with enabled and disabled use ip firewal... ... in NAT table i have port forwar...

dejanb

Hello Guys! I know there is a numerous posts about hairpin nat problems in version 6 of Mikrotik but i can't find the solution to solve it! I tried many differnet aproaches from the forum, then from the Wiki Mikrotik but it doesn't work at all. My config is this: ether1 - wan ether3,4,5,6 and wlan i...

dejanb

Hi Guys! I'm trying to find some solution to separate IPTV traffic from internet traffic, i have a wireless network with many of ubnt nanostations5 and Mikrotik sxt devices, network is routed and i'm using pppoe for authentication and bandwitdh limiting. I would like if i can somehow separate intern...

dejanb

Hello guys! I have big problem with simple queues at RB 1100AH x2... They doesn't limit bandwitdh properly, let's say we limited user to 4M/4M when he/she tries speedtest it get about 3.25 or 3.70 ping very high 50-60ms... We created limit of 6M/6M for same user, he gets about 5.60 eventualy 5.85, a...

dejanb

Hello! I suggest you to create PPPoE server on Mikrotik and use RADIUS protocol, you can use Mikrotik's Usermanager or some other software like DMAsoftlab Radiusmanager for limiting user uptime, quotas... etc... This question is answered 1000+ times, go to wiki Mikrotik or just try to google a littl...

dejanb

Glad I cloud help mate. Sometimes trying to figure stuff out at odd times of day is a lonely place to be ;-) Hello friend! I know this is quite old topic but i need your help once again :) Few days ago i realized that my download traffic is going through ISP2 and upload through ISP1, routing filter...

dejanb

Hello Friend!

I will advise you to use Mikrotik User Manager or DMA Softlab Radius Manager software!
I'm using Radius Manager now and i'm very satisfied with it.

If you need some more informations, feel free to ask!

Regards!

dejanb

Hello!

Sorry, my mistake xD
I didn't saw that you are using RB800, i had same problem, but on x86 Dual Core system.

Regards!

dejanb

kernel panik.png
after upgrade from 5.9 to 5.13
RB800 reboot 4-5 times a day
than downgrade to 5.12 but same
Any Help?
Tnx

Hello!

Do you have multi-CPU enabled? if so, try to disable!
I had same problem until i disabled multi-cpu support!

Regards!

dejanb

Hello, I have some issue with my wireless link, I got error messages is in my log when link is disconnected. xx:xx:xx:xx:xx:xx @wan1:disconnected, no beacons received And xx:xx:xx:xx:xx:xx@wan1:connected, is AP, wants WDS please share the solution for it. Thanks Hi! Check: http://wiki.mikrotik.com/...

dejanb

Hello!

Did you enabled "radius incoming" on NAS?
If no or not sure try:

radius incoming print

if not enabled:

radius incoming set accept=yes port=1700

Regards!

dejanb

Hi, A /21 is simply 8 /24 subnets aggregated. As such splitting this to specific providers is simply a matter of bgp filters for the relevant providers. Setup a BGP session to each provider. Add all the /24's to your bgp networks. Setup filters for the specific /24's you want to announce to each of...

dejanb

Hello guys! I need help with BGP. I have simple multihome setup with my two upstream providers, and for now, it works very well. Problem: I have /21 prefix that i advertise, i want to split it into 8 /24 blocks, so i can route some IP addresses to ISP1 and other part to ISP2. Is this possible? i re...

dejanb

Hello guys! I need help with BGP. I have simple multihome setup with my two upstream providers, and for now, it works very well. Problem: I have /21 prefix that i advertise, i want to split it into 8 /24 blocks, so i can route some IP addresses to ISP1 and other part to ISP2. Is this possible? i rea...

dejanb

Hello! Why don't you just try it and see be yourself? It works for me, i have several clients with PPPoE connections and small base station attached behind that NS5... Best Regards! Hello! I'm using NS5 in station-wds mode with Mikrotik as ap bridge + Dynamic WDS, and it works very well for me too.....

dejanb

Hello!

I'm using NS5 in station-wds mode with Mikrotik as ap bridge + Dynamic WDS, and it works very well for me too...

Nanostation5 loco, not M5 series and ROS 4.17 at Routerboard 333.

Regards!

dejanb

Hello! I just installed ROS version 5.1 on x86 machine, with usermanager package. Everything is just great, only two things are bothering me: 1. When i connect, i see active users and sessions, but data is not refreshing, i need to logout and login again to see user statistics, or when i disconnect ...

dejanb

No Buddy still trying but didn't ...... tell me what to do on other computer? i have enter one more user as you said by this command. [admin@MikroTik] > ppp secret add name=shaikh password=shaikh profile=user1 disab led=no so what to do now to connect through this router on other computer? do i hav...

dejanb

is it right? what to do now? [admin@MikroTik] > ip dhcp-client print Flags: X - disabled, I - invalid # INTERFACE USE-PEER-DNS ADD-DEFAULT-ROUTE STATUS ADDRESS 0 WAN yes yes searching... It looks like you didn't got IP address from modem, try to turn off/on modem, and, what IP address you got from ...

dejanb

is it right? what to do now? [admin@MikroTik] > ip dhcp-client print Flags: X - disabled, I - invalid # INTERFACE USE-PEER-DNS ADD-DEFAULT-ROUTE STATUS ADDRESS 0 WAN yes yes searching... It looks like you didn't got IP address from modem, try to turn off/on modem, and, what IP address you got from ...

dejanb

i have reset router using " system reset " command. and then i do as you said and you can see all the setup below A to Z. now tell me is it all done now or any thing still missing because it's still not working. Terminal vt102 detected, using multiline input mode [admin@MikroTik] > interf...

dejanb

now tell me which port i connect to my dsl modem and which one to switch (attached with other computers) ? how to define DNS settings? WAN connect to dsl modem, LAN to switch! It will be defined automaticaly with dhcp-client you created earlier what to do on other computer to connect through this r...

dejanb

It's attached. kindly tell me how to create users and how to complete other settings. I will be very Thankful to you. Regard's Shaikh You didn't renamed ethernet interfaces like i said. Enter: interface ethernet set ether1 name=LAN disabled=no interface ethernet set ether2 name=WAN disabled=no Then...

dejanb

where are you dejanb?
i am unable to complete the process.
Plz help me.

Did you renamed interfaces exactly like i said?
Yes i do as you said, but did't work.

Enter:

interface ethernet print

And post here an output of command.

dejanb

where are you dejanb?
i am unable to complete the process.
Plz help me.

Did you renamed interfaces exactly like i said?

dejanb

when i have entered this value ip address add address=192.168.0.1/24 interface=LAN disabled=no this msg displayed there input does not match any value of iterface You must first rename ethernet interfaces from ether1 and ether2 to LAN and WAN, In winbox, just click two times on ether1 for example, ...

dejanb

it reset now. now tell me some things bcoz i did't understand that ip address add address=192.168.0.1/24 interface="your lan interface" disabled=no (my lan interface????) ip dhcp-client add interface="your wan interface" use-peer-dns=yes use-peer-ntp=yes add-default-route=yes di...

dejanb

No matter, just logon with winbox.

dejanb

Ok, We need to assign ip address to ethernet interfaces first: 1. LAN inteface (to switch) ip address add address=192.168.0.1/24 interface="your lan interface" disabled=no 2. WAN interface (to modem) ip dhcp-client add interface="your wan interface" use-peer-dns=yes use-peer-ntp...

dejanb

Ok, We need to assign ip address to ethernet interfaces first: 1. LAN inteface (to switch) ip address add address=192.168.0.1/24 interface="your lan interface" disabled=no 2. WAN interface (to modem) ip dhcp-client add interface="your wan interface" use-peer-dns=yes use-peer-ntp=...

dejanb

Hello! You need to create PPPoE server on the mikrotik, if you want to authenticate users with username and password. Then, you can specify rate limits easily in ppp profile, for each user. Regards! Thanks a lot Buddy for your reply. but as i said i am new born baby in this ROS World.so i don't kno...

dejanb

Hello!

You need to create PPPoE server on the mikrotik, if you want to authenticate users with username and password.
Then, you can specify rate limits easily in ppp profile, for each user.

Regards!

dejanb

Yes they are. So there is no need to configure vlan? another solution except PPPOE? You can use private IP's on client LAN card, and then netmap it to Public IP on the Mikrotik, or you can create some kind of DHCP server, which will assign public ip address to clients... There is no need to configu...

dejanb

Thank's a lot for your attention.
Via cable.
Direct Cable.

Ok,

So, You are connecting users directly from lan ports of RB750?

You can create PPPoE server with rate limits for each user on RB750 easily to acomplish your task.

Regards!

dejanb

Hello friend!

I need more informations about your problem:

How do you plan to connect users? via wireless, cable...?
What kind of internet connection you are getting from your ISP?

Regards!

dejanb

Hello!

I want to implement same scenario, but i'm in doubt what to use.

I have around 45 mikrotik base stations, every of them is bridged with ONE PPPoE server via EOIP tunnel.

How can i create another pair of tunnel on the other PPPoE server, so they work together?

Thanks anyway!

Regards!

Dejan

dejanb

Hello! I had the same problem, i'm using Radius Manager too. I created for each service, next service, which is assigned to the user when his time expire...etc. In that service, i specified pool with IP addresses, that are redirected at the mikrotik, to the our info webpage, for now, it works perfec...

dejanb

Hello! I have some strange issues with Mini pci card TP-LINK TL-WN861N, when i change frequency, nobody connects!, i need to disable enable wireless card, turn on/off chains in HT tab, and then suddenly, everything is working, this only happens when changing frequency, i have the same problem, on th...

dejanb

Hello!

I checked with LevelOne support team, and they said that model WBR-6002 is fully compatible with 802.11b/g/n simultaneous connections.
So is there some misconfiguration in my settings, or MT problem?

Thanks,

Dejan

dejanb

Thank you for your response. 1. I have 2 ADSL router from 2 differnt ISP. each router giving 24mbps download and 2 mbps upload. 2. I want to connect around 200 clinets and future more 3. both router has ip : 192.168.5.1 and 192.168.6.1 so they are the gateway. 4. Each client will have 2mbps downloa...

dejanb

Hi, I have a bridged wireless network, and I have two internet connections in different places of my network, the idea is to install two MT routerboards as PPPoE servers connected to each internet connections. So I can balance staticaly the users per one connection or the other. I have tried it, I ...

dejanb

Hi, I just bought a RB 1100 router which has 13 GB port. I want configure the router for my network. I'm willing to pay for this small job as i'm not that good at routeros. I need 3 things to do in my router for decent browsing. 1. 2 WAN port load balance 2. Traffic shapping (http, ftp, p2p etc) 3....

dejanb

maby your card doesn't supports g and N simultaneous connections ....

Hello!

Did you think ap at the client side (levelone WBR-6002)?
I will check that as soon as possible.

Best Regards!

dejanb

Greetings! I have some strange problems with 802.11n 2.4GHz base station. Hardware: IBM x86 PC as mikrotik ap Mini pci card TP-LINK TL-WN861N 2x TP-LINK omni antennas 2x 3m low loss 50ohm coax. cable. Software: Mikrotik 4.9 Problem: I have for about 10 clinets asocciated, eight of them are using 2.4...

dejanb

Hello! I'm using RB750 as PPPoE server without RADIUS, using ppp secrets for connecting small group of users. One ethernet is connected to my ISP, who is routing me /24 block of public IPs, other ethernet is connected to MT wireless router, that is serving 2.4GHz clients. Every client have public IP...

dejanb

Greetings! I have problem with PPPoE server at RB750 with mikrotik 3.30. When user connects, simple queue is created automaticaly with targeted upload and download, it's limiting download properly, but upload don't, it's unlimited! I tried to find some similar problems on the forum, but with no luck...

dejanb

Hello!

Insert 200.49.142.51 for the second IP...

Regards!

dejanb

Hello!

Please post your config first...

Regards!

dejanb

Greetings! I will try to demonstrate you a example how it needs to be configured: 192.168.1.1 -- Public IP address of you MT 192.168.1.2 -- Your second public address 10.1.1.1 --Your DNS I used private IP addresses just for example, You need to change it to your public IPs in your configuration! exa...

dejanb

Hello! You need to create PROFILE and SECRET for that user, in you picture you are creating two secrets, not profile. In winbox go to: PPP - PROFILES and fill the values from my previous post. When you finish creating profile, create SECRET for that user under PPP - SECRETS menu in winbox, in profil...

dejanb

Hello! From your story i understand that you have 5 public IPs from your ISP and that you are using one for all clients (NAT). You are assigning private ip addresses to clients, and you need one specific client with public ip... ppp profile add name="guy_with_public_ip" local address="...

dejanb

Hi! At the site A: interface wireless set wlan1 name=wlan-link mode=bridge band=5GHz frequency=5200 tx-power-mode=card-rates ssid="some_name" disabled=no interface bridge add name=interface-bridge protocol-mode=rstp disabled=no interface bridge port add interface=wlan-link bridge=interface...

dejanb

Hi! At the site A: interface wireless set wlan1 name=wlan-link mode=bridge band=5GHz frequency=5200 tx-power-mode=card-rates ssid="some_name" disabled=no interface bridge add name=interface-bridge protocol-mode=rstp disabled=no interface bridge port add interface=wlan-link bridge=interface...

Search found 54 matches