MikroTik

caspat

Did you figure out how to change it?

caspat

Please add the capability of ZeroTier controller to use private roots/moons

Like zerotier-cli orbit on linux

+1 for this request!!
Or, a way to change planet file! :)

caspat

Big thank's!!
Any timeframe to port it to others platforms?

caspat

+1 for Zerotier!

caspat

+1000 It would be so great!!

caspat

Have you figure it out? I'm on the same boat!

caspat

Try this, Put those rule before the fastback rule /ip firewall filter add action=accept chain=forward connection-state=established,related src-address=172.16.25.0/24 add action=accept chain=forward connection-state=established,related dst-address=172.16.25.0/24 It work for me... Have a good day! Pat...

caspat

I also experience client disconnection/reconnection on some clients. i'm also on v6.44.3

caspat

Hi, i have read in the changelog that the dst-limit bug have been fixed in version 6.32, can someone put this info on the wiki page and maybe change the example. thanks! Hi. Are you sure it's the same bug? IIRC, I checked this about a year ago — it was still here... I'm not sure, i just read it in ...

caspat

Hi, i have read in the changelog that the dst-limit bug have been fixed in version 6.32, can someone put this info on the wiki page and maybe change the example.
thanks!

caspat

+1 For MacBox!

caspat

It time for Mikrotik to give us A MacBox!!
A tool like winbox that run natively on macos!
Many of us ar working on Macos!

Please please!!

Patrick

caspat

Not an option but a HUGE one for me would be POE out on every port. I have so many sites where a 10 port MT with POE would be my only device at the base. I Currently run a mix of 2011 and a Netonix or hEX POE on smaller sites Backhaul and uplink to 2 or 3 other hops plus a few sectors, all back to ...

caspat

Surely I can't be the only one screaming out for such a product. The HEX POE is nice, but only have 4 x POE out is limiting for slightly larger sites. Why can't we get something like a 3011/4011 or small CCR with POE out available on every port. It would really simplify hardware for WISP sites I to...

caspat

Please add an option in dhcp lease to add device to a already configuered kid.

caspat

Is RB4011 have the same behavior?

caspat

Need that device but a little bit more beefy, so we can add 100ah batt and it should be able tu supply power to a powerbox full load!
Maybe Gen2!!??

caspat

Same with 6.40.3 return to bugfix only 6.38.7 and it's ok now

caspat

Not Bad!

caspat

I found!!!
http://wiki.mikrotik.com/wiki/PCC_exemptions

Thank's to all!!

caspat

Please help me someone!!

caspat

No, that my probleme i dont know how to build it...

caspat

in my internal network i have 10.0.1.0/24, 10.0.2.0/24, etc. 192.168.10.0/24. 192.168.11.0/24 etc... 172.16.x.x for ospf
direcly connect to internet router i have 10.0.0.1(pppoe) 192.168.1.0/24(server), 172.16.8.0/24 (local, ospf)
Thanks!!

caspat

sorry, do i have to create a new mangle rule?
Please can you post an example.
Thanks

caspat

i dont understand....

caspat

Hi all, I have my router configure with dual WAN load balancing, it work great BUT i cannot acces my internal network from other interface. Please what is missing... here is my mangle rules 0 chain=input action=mark-connection new-connection-mark=wan1_conn passthrough=yes in-interface=ether1-public ...

caspat

The feature was introduced a long time ago, and RADIUS clients now have a src-address parameter. You shouldn't need those NAT rules anymore. The thread is coming up on 5 years old.

Can i set this in winbox? i cant find it? maybe i'm blind....

Thank's
Patrick

caspat

Ill just stick to my src nat rule untill mikrotik sort out a src-address feature...

Can you provide detail of your src-nat rule please?

Thank's
Patrick

caspat

Is any of you have try to install zeroshell on routerboard?

caspat

A RB750GUP would be good too...

Pat

caspat

that is what i did...

Pat

caspat

It does not work...

caspat

Hi all!

How can i reset the TX/RX bytes on interface?

Pat

caspat

Have you find a solution to your probleme? if yes can you share it?

Pat

caspat

Maybe i didnt post in the right forum? if so please transfert it to the right place...

Thanks

Patrick

caspat

No one can help me with this one?

Pat

caspat

Hi all! Can someone can validate config i wan to put in my router SVP? I have two wan, one is fixed ip and the other is dhcp. /ip route add check-gateway=ping comment="" disabled=no distance=1 dst-address=\ 0.0.0.0/0 gateway=ether1-public routing-mark=to-public1 scope=30 target-scope=10 ad...

caspat

Is it possible to replace staros by routeros on c-54pwe board?

Pat

caspat

Hi,

Is ti possible to disable the rate limit for a custumer when he is accessing internal ressources?
Like a backup server...

Patrick

caspat

What i understand in that, is that i have to put this config in each router?
Or juste the router where the pc is conected?

caspat

Ok i think i forget to tell somithing, there are many router in the internal network, all routed by ospf.

dual wan.jpg

caspat

All that i can find is 2 wan connected to the same router...
Please help!!

caspat

Hi,
What i want to do is route a selected source adress to a different gateway on the network.
Default gateway for internal network is on wan on router1, i want to route pc1 to go out by router2.
Is there someone that can help me with this?
Patrick

dual wan.jpg

caspat

Thanks that did the trick!!

Pat

caspat

caspat

Hi to all,
i have made some rule in firewall that i want to log onto remote syslog.
Is there a way to dont log those rule in memory too?

Thanks
Patrick

caspat

Hi,
Is there a way to have 2 internet connections in 2 differents site and do loadballancing and failover on both?

Pat

caspat

I know but where do i change this?

caspat

Hi all!
Ok i have configure a pppoe server using the wiki, when i connect to pppoe i get an adresse 10.0.0.1 ( from ip pool i have created) netmask 255.0.0.0 no default gateway... is this normal?
Thanks!

Search found 49 matches