MikroTik

a-l-i-e-n

Ubiquity nanostation and rocket uses 0.1 - 0.15 A, so the 500mA limit is not excided. The most usage I've seen is RB600 with R52H it uses 0.3 A, and it stayed powerd, when the nanostation and rocket lost power. Also In voltage monitor is aprox. 2V diference from the voltage mesurd with volt meter, w...

a-l-i-e-n

Hi, I have tested RB750UP with powering 2 ubiquiti nanostation an 1 ubiquity rocket with 24V backup power suply (55W Single Output with Battery Charger(UPS Function) AD-55 series + 2X 12V 12AH leasd battery) only on battery power. After 4h, voltage droped to 21.4V and 1 nanostation (eth2)and 1 rocke...

a-l-i-e-n

Hi,

Is it possible to turn off the red light, so the status of the ethernet conection would be seen
now you can't see if the device has an ethernet conection or not

I'm also interested in current(mA) consumption monitor, when will it be implemented?

a-l-i-e-n

Nothing new ont this topic?
I sitll don't see igmp snooping support in mikrotik.

Is there any way arround that?

a-l-i-e-n

will it suport igmp snooping?

a-l-i-e-n

it is only a simple 5 port ethernet switch

a-l-i-e-n

you have to upload the printscreen

a-l-i-e-n

anyone?

a-l-i-e-n

Hi, I have a multicast problem and I need a firewall roule that would block multicast on RB450G router On WAN shich are connected 3 IPTV recivers and RB450G router for internet sharing I have torched ether1 (connected to the wan swich) and I saw 3 connections with speed up to 6mbps I guess that why ...

a-l-i-e-n

please someone help me with this

a-l-i-e-n

does hotspot block vlan?

a-l-i-e-n

does hotspot block vlan? I vas testing vlan and it worked all over my network, excep throuhg hotspot interface

a-l-i-e-n

does vlan use less cpu?

a-l-i-e-n

curently there is 2X 3mbps on eoip tunnel

it is the sam when there is 2X 20mbps over eoip

a-l-i-e-n

Hi, I have RB450G with ROS 4.4, my problem is that the CPU % is going from 4%, 16%, 54% 63% -> 100% this is changing all the time That wouldn't be strange if I would have a lot of traffic going throug the interfaces, but it is not, I have few mbits of traffic, 30mbps max. On the interfaces I have fe...

a-l-i-e-n

I have RB433AH with ROS 4.2 with ethernet problem. All my interfaces are in a bridge. One wireless interface for uplink, 2 wireless interfaces for connecting clients and etheret connected to other AP (tp-link / ubnt ). Dhcp is not getting(sometimes cilent get the dhcp ip, but in most cases it dosent...

a-l-i-e-n

I thought off 2 things...

would one of those examples work?

a-l-i-e-n

@tgrand how many xr5 cards do you use on each rb333? ----------------------------------------------- At on of my setups I get 60mbps in one direction using one mini pci card If I would use 3mini pci cards and bond them together wouldn't I get 180mbps data transfer? that can be used for 90mbps ful du...

a-l-i-e-n

Hi, I need 100mbps full duplex link Should I use MIKROTIK RouterBOARD 433AH and 3X RouterBoard R52H cards (turbo mode )and bond them together. Would the router have enought procesor power? Or Should I use MIKROTIK RouterBoard 600A and 4X RouterBoard R52H cards and use 2X dual nstream and bond both d...

a-l-i-e-n

Hi, I'm using mikrotiks DNS (router os version 2.9.51) I have added internal ip adresses to reslove them to hostname... and it works -> 90% of a time... when something is wrong router resolves hostname to a mikrotiks router os page.... if i ping it I get a replay from my internet IP.... Does anybody...

a-l-i-e-n

5v is not a problem...
the drivers it a diferent thing... can drivers be integrated in v3 mikrotik softvare?

a-l-i-e-n

Hi,

Would routerboard and mikrotik routeros suport PER-C20U-A10
Mini PCI 4-port USB 2.0 Module http://www.ieci.com.au/products/Product ... ct_ID=3530
Would it be possible tu use as an interface for UMTS modems ?

Best regards,
David

a-l-i-e-n

rb600 could be overclocked to 533mhz...

How?

a-l-i-e-n

it worked fine befor upgradeing it to 3.0... and if I switch channal signal increases to -77 dBm with the same problem (ping time out)

a-l-i-e-n

Since I've upgraded to 3.0 my clients get a lot of ping time out... AP is RB 333 and clients are 2XRB411,1XRB112 AP and RB411clients have 3.0 installed RB112 has MT:2.9.45 installd <--- with no ping time out at first i thought that iterference cause this, but I tryed evry allmoust every channel on 2...

a-l-i-e-n

what will be 411R ?

on the board is RouterBOARD 411/411R mark like on RouterBoard 133/133c
so what will be RB411R like?

a-l-i-e-n

thank you so mouch! I'm realy happy that's nothing serious...
And I was wondering why it shows a big drop in voltage... that's why...

a-l-i-e-n

yes that is the one, finaly I got a bigger picture of rb333

http://static.album.email.si/2/0/435020 ... jmBk06.jpg

a-l-i-e-n

do you have any larger picture of the board... ?

a-l-i-e-n

save it to your computer then zoom in

a-l-i-e-n

zoom and you will see it... it is a very small element looks like a resistor or a capacitor

a-l-i-e-n

Can someone from MikroTik tell me what consequences wuld be it the markeed element on the picture woul broke

http://shrani.si/?1P/oz/2jm5C1i2/rb333s1.jpg

a-l-i-e-n

tryed with rc10 too and it dosen't work eather I'm using server 207.46.130.100... this NTP server works on all non beta routers... tryed with diferent NTP server on rb333 (time.windows.com) and this one works... I think that it should work with 207.46.130.100 too but because unknown reason it dosen'...

a-l-i-e-n

I'm using NTP client on all of the RB133 and it is working, when I tryed to enable this in RB333 wiht v3.0rc7 it didn't work....

I tryed with server Im using on all other RB boards...

RB333 has acces to internet so it should work...

a-l-i-e-n

can someone please fix this
http://wiki.mikrotik.com/wiki/User_Mana ... entication

this dosen't work...

a-l-i-e-n

RB 133 has 175mhz procesor

RB 333 has POWER PC 333mhz CPU + 175mhz coprocessor

so rb333 is a lot, lot faster than rb133....

a-l-i-e-n

main router (dhcp,ppoe,hotspot...) - eth-> <-eth - wireless router - wireless -> <- wireless router - wlan-> client ...OK main router (dhcp,ppoe,hotspot...) - eth-> <-eth - wireless router - wireless -> <- wireless router- ethernet-> <ethernet- wireless AP-> client ... data comes throu to clients co...

a-l-i-e-n

I replaced P3 900mhz wlan router with MT 2.9.46 for RB333 with MT v3.0rc6 On RB333 I'm running PPPoe server, hotspot, dhcp server, web proxy, few nat rules... on P3 ther on 5ghz interface was aprox. 40-50mbps (tcp) speed in one direction using Nstream... now on RB333 I only ges 13-15mbps speed with ...

a-l-i-e-n

Hy,

I've uploaded video last week...
this week I sent email to suport.... with no responds....

a-l-i-e-n

It vouldn't be a problem If I could log in to the router
The router didn't respond in any way....
Why do the normal versions work fin and the first beta thah I try dosen't... ?

a-l-i-e-n

I took the CF disk out and I conected it to diferent computer.... MT worked there.... then I tried to upgrade it one more time .... in primary computer MT didn't worked.... I've downgrade it to version 2.9.42 and now MT works ....

I don't know why 3.0beta7 dosen't works ....

a-l-i-e-n

It dosen't

a-l-i-e-n

I can't do that my pc is 5m from the top of the roof ....
Can I save the data somehow ?

a-l-i-e-n

I upgraded from MT 2.9.41 to 3.0beta7 via webox ....
then I gave the command for restart and now I cant get to my MT .... why?

Is this normal... ?

a-l-i-e-n

you must activate it

a-l-i-e-n

I think mikrotik-s wi-fi scan shows you even AP-s with hidden SSID-s.
If this dosen't suits you use netstumbler

I hope thats my bad english dosen't bother you

a-l-i-e-n

http://www.si00n.org/mt.JPG Did anyone seen or noticed this kind of truble ? I'm trying to use MT as a VOIP gateway .... I'd tryed to this on several other computers running MT an on all I had the same errors. On the picture is fresh installed MT, I yust added IP address for the interface. ......

a-l-i-e-n

a-l-i-e-n

I'd like to mark all trafic coming from server.
I have tryed several things and I didn't have any sucess....

a-l-i-e-n

Is this OK? [admin@MikroTik] ip firewall mangle> print 6 chain=prerouting dst-address=10.10.10.1 action=mark-packet new-packet-mark=server passthrough=no 7 chain=prerouting dst-address=10.10.10.1 action=mark-connection new-connection-mark=server conn passthrough=yes Server is connected via pppoe ......

a-l-i-e-n

thanx!

a-l-i-e-n

I saw it once on the forum ... I can't find it again ....
Can someone plese give me the link

.... thanx !

a-l-i-e-n

can you plese describe how to do that

a-l-i-e-n

Is it possible to limit download and upload speed to the internet, but not to internal server ?

I'm using PPPoE server....

PPPoE server 10.10.10.100
Server... 10.10.10.1
Clients.... 10.10.10.2-10.10.10.30

Tnx for the help ....

a-l-i-e-n

I tryed to set up a hot spot on 2 wireless cards .... I used the set up wizzard. When i connect with my notebook on wlan1 the hot spot login works, but whe I connect to wlan2, hot spot login dosen't opens. I've recently upgraded MT to 2.9.14 version ... I think that before it worked on both interfac...

a-l-i-e-n

I tried bridging and it worked, but only with Linksys WRT54G,
I still can't get Mikrotik and D-link to work.....

any idea ?

a-l-i-e-n

Hello, I'm trying to connect two mikrotik routers. In MT manual the WDS is discribed: [WDS (Wireless Distribution System) allows packets to pass from one wireless AP (Access Point) to another, just as if the APs were ports on a wired Ethernet switch. APs must use the same standard (802.11a, 802.11b ...

a-l-i-e-n

afcourse i've treied by the manual.... that works yust for the internet ....
I need to connect local network too

@cmit
No offense.... How do you know I haven't read the manual?!..... I did !! but I still need some help. So I'm asking for a litle help.

a-l-i-e-n

How??

a-l-i-e-n

Hello,

I wuld like to connect PPPoE (10.10.10.X) client to my local netvork (192.168.1.X). Now PPPoE server yust provides acces to the internet.
Is this possible?

tnx,
David

Search found 60 matches