MikroTik

gzohop

Maybe mikrotik could mix the chip from RB250 and some other 8/16 10/100 chip and treat the 5 gigabit ports as uplinks.
This would make some good endpoint swith:)

gzohop

Could you describe the test that you did and the results please. I was testing by connecting to the BS ~100m clear view away. It was no "N" with NSTREME1, I was comparing between RB711 + 19dbi panel antenna. The 19dbi antennas are made custom for us and we are pretty sure about quality. T...

gzohop

or to sell a standalone RB from SXT Why not RB711? Or do you mean something like a UBNT Rocket that come weatherproofed? Ekkas Dual chain/polararization and 26dbm 711 does not have any of this ;) Finally i Have The SXT's in my hand. After testing and comparing with RB711 + 19dbi Box antenna(Panel t...

gzohop

You have not yet mentioned the excellent port-to-port isolation of the SXT antenna. I'ts -30 which is better than any competitor. This number is just as important as the gain, and helps with improved speed and performance. The 16dbi antenna gain seems to low for me to, but we will see how does it w...

gzohop

Session limit is possible with User Manager test package at v4.x and User Manager package at v5.x

Will it be included in regular usermanager 4.x ?

gzohop

Should work
Haven't try this but I have p2p with two RB711 L3 ~100mbit throughput with "N" and dualchannel.

gzohop

ripice thank you very much for the comments. We will see what we can do. gzohop /system routerboard settings set boot-device= allows you to change boot-device from RouterBOARD console. Thanks I missed that, I assumed that there is no such possibility because on every Netinstall howto's I have seen ...

gzohop

or/and can you add possibility to change the boot loader configuration from the running ROs ?

gzohop

Well! Normis! Please check the returned RB711's, because this product is a good idea and shold be a very sophisticated CPE, with lot of good features!!! (From an earlier shipment I have countless of good RB711's in my network! The performance is compelling: 25Mbit FDX!!!, 11a, nstreme on!) :D BR, d...

gzohop

I have the same problem with some RB711 Samoe of them connect without problem but some tend too disconnect even though the signal strength is ok eg. -66db oe even -45db. This problem was very extreme on RB711 with ROS4.16 The affected RB connect to the AP and disconnects usually with "extensive...

gzohop

I had the same problem, it seems that there is no possibility to make RB250 not tag default vlan, it is possible to set it "leave as is" but it works only if packets are already properly tagged.

gzohop

Often it seems so..

Give some more info on the config how big is the date base?

gzohop

Hi

Does anyone know how to make the discovery button work under wine?
Because it works for me on one machine and does not on another and I cannot find out why.
Does it work for you?

gzohop

post used config

gzohop

I'm having the exact same issue. Does anyone have a work around for this problem?
Rob

Me too

Can someone from mikrotik give comment on this?
Will it be changed in new SwOs?
Or maybe there is way to achieve this in 1.2?
Or this will not be implemented?

Regards

gzohop

I have few hotspots using one centralized UM for authentication The hotspots are running on bridged interfaces and some of them send to the UM as the "NAS Port ID" the name of the bridge and some send the actual bridge port name The documentation says that this should be the bridge port na...

gzohop

Make fresh installation with Netinstall, it seems there is problem with FS on flash and I suppose there is risk that you have lost license key.

gzohop

Is there way to start script on login with UM just like on hotspot side?

gzohop

hmm

You could start script with hotspot on user login and intercept user mac and update userman database.

gzohop

AFAIK there are no such options in 4.x, just 5.x and/or 4.x-test UM

gzohop

Did litle(very litle) research and it seems Mt is limited/ by the chip they've used TF-470-BCL http://www.cyberwin.com.cn/issuepic/200692132549t2i195.jpg Haven't found full spec of this chip but if it has hardware Web acceleration so this is why they prefer to use it, or maybe it's not possible too ...

gzohop

the only difference is personal preference.

bmw vs audi, mac vs windows etc.

exactly, but remember AMD is better

gzohop

We have similar problem with rb411AR, the built in radio disappears sometimes.
It is very random once there is radio after bootup once not.
It has 4.11 OS but with 4.5,4.9,410 it was the same.
We have tried all sort of power supply the bootloader is up to date etc.

gzohop

to make traffic accounting you must use hotspot.

gzohop

But there are people that dont use wine, Is hard to make it for linux? yes it is very hard to make it for linux. there are people who don't use your favourite flavor of linux. Have you thought of creating mac-telnet linux version? It would be very useful tool, winbox works under wine but like other...

gzohop

Have you set up port properly?
AFAIR 115200, no flow control the rest is as standard win setup.

gzohop

Javier[/quote] I have a link at 45km@10Mbps full duplex in enviroment highly interference present. I use Nxtreme and two Radiowave antenna by side each of 30dbi/[/quote] This is not mistake? 45km not 4,5? I'm using link 5.3km. Grid and panel antena no "N" mode link is 54/54Mbps + nstreme. ...

gzohop

If you will use nstreme this is possible.

gzohop

Post the rules you have put on RB it will be easier to find out what is wrong

gzohop

It's aimed as CPE so there's no really need for MIMO I guess.

gzohop

I don't understand your point :) What is so hard in making predefined config files and then just forget about the web interface? Because I would have to create config for every possible situation. If I would like to connect every customer to different vlan let say with the same id that he has in my...

gzohop

You must give more details, or/and configuration you are using,
because there is to much different configurations you can setup using RO and no one will guess the good one for you

gzohop

Are there plans to make SWOs access via telnet or ssh? Because IMHO web UI is the worst it could be in such device :/ don't all switches have web config ? No they don't. It's not easy or quick to click, because you need to hawe X interface etc, and this is hard to create such conf by scripts. If yo...

gzohop

only fan pins AFAIK

gzohop

Are there plans to make SWOs access via telnet or ssh?
Because IMHO web UI is the worst it could be in such device :/

gzohop

Userman 5 has user field "shared-users" it should do the trick. But I have similar question. I would like to limit users sesion to one per login with hotspot using userman as AAA, but across few hotspots. Now with userman 4 there is no option to setup "shared-users". Is there any...

gzohop

Yes it does all routers are aware of all existing networks etc. <<<<edit>>>> It seems that "mishaM" advice from that post http://forum.mikrotik.com/viewtopic.php?f=14&t=40219, solved the problem. At least on 2 test test routers, after removing transport addressthey get local and remote...

gzohop

Set up DHCP server on mikrotik for network 192.168.85.0 and make mikrotik the default route for host B etc, set default route on mikrotik too your gateway, this will give access to the A network for B hosts and will give them internet access. On the A network you can either set default route to mikr...

gzohop

Hi I'm trying to setup mpls. I'm following this example http://wiki.mikrotik.com/wiki/MPLS_Lab_Setup But it seems not to work. I have 3 routers connected together just like the core routers in example. The addresses are assigned and OSPF routing works just fine there is a ip connectivity between all...

Search found 39 matches

Re: Switch with more than 5 ports

Re: RouterBOARD SXT 5HnD

Re: RouterBOARD SXT 5HnD

Re: RouterBOARD SXT 5HnD

Re: Session Limit

Re: Can I make P2P with 2 rb411 board ?

Re: ALWAYS boot on try ethernet once then nand

Re: ALWAYS boot on try ethernet once then nand

Re: RB711 Wireless problem / Disconnect from AP

Re: RB711 Wireless problem / Disconnect from AP

Re: Port Native VLAN

Re: Transferring database

Re: Winbox on Linux?

Re: R52nH

Re: please do not tag default vlan in "add if missing" mode

UM + hotspots + bridge

Re: router 433 doesn't boot

Re: Merging hotpot with mac authentication

Re: Merging hotpot with mac authentication

Re: Decrease digit of username and password

Re: SwOS version 1.2 released!

Re: amd or intell

Re: RB411AR wireless interface missing

Re: DHCP server, authorization by macaddress in UM

Re: Winbox on Linux?

Re: RB450 bricked

Re: Is razonable to promise 25Mbps FD on 3.5km link: r5n+433

Re: Is razonable to promise 25Mbps FD on 3.5km link: r5n+433

Re: Firewall Rules

Re: New 711?

Re: SwOS version 1.2 released!

Re: Help with simple setup

Re: SwOS version 1.2 released!

Re: Send Telnet commands from RB´s script to direct host

Re: SwOS version 1.2 released!

Re: User Limiting Iusse

Re: mpls basic

Re: How to connect and routing 2 subnets and sharing interne

mpls basic