MikroTik

Senux

Mikrotik cheats customers with LTE6 modems. I have an LTE6 phone - download is about 220-240 Mbps and upload about 40-45 Mbps. When I insert the same SIM into the Mikrotik RBwAPGR-5HacD2HnD-LTE6, the download speed is about 90-100 Mbps (sometimes up to 110 Mbps) and upload about 40-45 Mbps, although...

Senux

I have heard about no one who bought a new router because the previous was bricked by update. They are rather sent to rma instead which is for sure profitable for mikrotik... And if You must work instead of waiting 2-3 weaks for paid rma - routers are out of warranty? You and other company workers ...

Senux

Hi ! I downloaded and installed the 6.39.1 of ROS on a RB951G-2Hnd. After rebooting, the router stopped to work properly. I wasn't able to gain access to the router via Winbox or Webfig using IP or MAC addresses. I tried to do factory reset, but for some reason I wasn't able to connect via Winbox(I...

Senux

*) disk - fixed issue when disk was renamed after reboot on devices with flash disks; Not fixed, after reboot gives other disk name (disk2 instead disk1) on 951G-2HnD. SMB corrupts folders and files names if there is not english letters. Also it is interesting - if they claims but so simple feature ...

Senux

Hello,

Any news on supporting E3276?

Thanks.

Huawei E3276s in stick mode is working with RB951G-2HnD with version 6.xxx as PPP client. Additional USB power must be used, etc. powered USB hub. Biggest problem is with weak Mikrotik power supply over USB port.

Senux

Hi , we just bought mikrotik (RouterBOARD 3011UiAS) to our LAB env, but we have problem with PPTP VPN, clients in network cannot connect to external PPTP server (not mikrotik) error 619 on the old router Linksys everything works fine,and with different router it is working without problem, so probl...

Senux

I tried with Huawei E1820 3G stick, which is not even listed as supported, and it works OK! That stick uses a normal "modem" interface with PPP. Apparently the E3372 problem is becuase it uses the HiLink mode, which is supposed to be better. However it can be downgraded to a modem stick, ...

Senux

He most probably wanted to use the ip as checking destination to see if the Internet is accessible.

Netwatch with scripts in Down tab will help. Search more information in the Internet. I do not use this, so can not provide scripts. Why do not use provider gateway if it works?

Senux

Different because of using DNS services for using different area restricted services for some web pages

Too complicated, IMHO. How do you react if user will use externall dns, for example google? Simplicity is the power - why do not block by IP address?

Senux

I do not understand your question. 8.8.8.8 is google dns server. You can point dns servers in mikrotik as you want, for example: first is local dns server, second is internet provider dns server, third google dns 8.8.8.8. If first dns server do not respond, dns requests will be diverted to second dn...

Senux

Can I configure not only DNS local records in ip dns static but also different dns for different URL ?

Different dns server for different url? why? Local DNS server will forward dns requests to external if it has not corresponding record.

Senux

This is DNS problem. You must add DNS static record with server name and IP in router. Network clients must use local DNS server in router as primary.

Senux

Read the post above, this is not a bug. It's standard Linux behavior. Read whats new: What's new in 6.35 (2016-Apr-14 12:55): *) arp - apply Linux Kernel patch to stop RouterOS from randomly exhibiting misplaced ARPs I have issue with this too - not valid LAN IP address with mac 00:00:00... - it is...

Senux

This is bug happily existing in 6.35.2 as well

What's new in 6.35 (2016-Apr-14 12:55):
*) arp - apply Linux Kernel patch to stop RouterOS from randomly exhibiting misplaced ARPs;

Senux

Hello, it is not possible as your ISP provide you private ip address, so you are Natted. You need to ask him for a public IP (it can be dynamic), but the risk is to pay more than now. Can i use VPN or ppoe client or other service for this problem? I can't get valid ip, (my ISP can't give valid ip) ...

Senux

It's a bug or a feature? Some clients directly connected to the router (cable) or to a panel (wireless 5.8/2.4) appear in arp address with 00:00:00:00:00:00 mac. In version 6.28 it's ok. feature, that is how incomplete ARP entries are indicated, so that you have easier time to debug ARP related pro...

Senux

Anybody has similar problems?

Senux

...
Do i have to change the PPP Profile? Or create a NAT Connection between VPN Connection and the a internal IP?
...

You need create nat rule. Also You can use same subnet for VPN and LAN users if it is enough one subnet address amount

Senux

I do not understand why you bought Mikrotik if You have working TP-link? Mikrotik configuration is complicated even for experienced users so throw out Mikrotik and be happy with TPlink - it do the same job because you will not need such powerful configuration abilities. If it is not enough TPlink st...

Senux

Greetings, I have RB951G-2HnD, firmware 6.35, using as firewall router and Wifi AP, internet access by PPTP (Huawei E3276s stick connected to USB). I loaded default configuration and after I made some changes. It is all working when I connect to router by WiFi - I can access speedtest.net and all do...

Senux

Greetings, I have RB951G-2HnD, firmware 6.35, using as firewall router and Wifi AP, internet access by PPTP (Huawei E3276s stick connected to USB). I loaded default configuration and after I made some changes. It is all working when I connect to router by WiFi - I can access speedtest.net and all do...

Senux

I prefer powered USB hub, because u can use it for attaching HDD or USB flash for additional functionality of router. I do not know how much power need E3372s, but I found information that Huawei E3276 modem needs up to 800 mA in some conditions, so IMHO it is no matter brand of USB hub but output o...

Senux

Hi there, I am trying to set up a connection Mikrotik rb951ui-2hnd and 4G Modem Huawei E3372s using ppp-out1 interface. Everything works fine, but from time to time I see the following error in logs: "ppp-out1: reseting link... - could not acquire serial port" and router can't connect to ...

Senux

Hello, I have used the Huawei E398 4G USB-Stick in an older OS-Version one year ago. It works with the PPP-Client Setup very well. Now I use this Huawei E398 with an other Mikrotik Board and an actual Firmware 6.34 and it dont work. Is for this a special setting necessary? Which USB stick is recomm...

Senux

Hello Folks! I would like to use the USB to power some devices and the ability to turn off and on the power from the Mikrotik router. The mikrotik device in turn is powered by using its PoE. ... Can Mikrotik devices manage to power Raspberry PI 2 via USB port ? Main problem is not USB power managem...

Senux

What Mikrotik? Yours device model is Mikrotik? Strange...

Senux

Ha ha ha , leaved alone by Mikrotik? Ya, this is actual in 2016 year too: RB951G and E3276s 4G card - dances with drums - sometimes work sometimes no. Old D-Link Dir-320 with custom firmware work with this card without problems. I still have perverted interest to Mikrotik because of price/posibiliti...

Senux

Hy, Mikrotik is not interested to support new 4LTE cards - I think they are waiting for 5,6 or 9 th generation of mobile networks or just waiting for those cards goes outdated. I am not expecting Mikrotik make support for E3276s card - you can choose router of other brand. http://forum.mikrotik.com/...

Senux

No - you do not need any cables.
Is still no 4G in Latvia? Seems no or Mikrotik stucked in XX century.

Senux

It is necessary to have USB 4G LTE cards support and USB reset function - new Huawei E3276s, also konwn as M150-1 (Megafon) and K5007 (Vodafone) may be used with RB751, RB951 and others for main or alternative internet connection.
Looks like Mikrotik ignore LTE.

Senux

RB951G-2hnd 5.24 - not available USB power reset feature, introduced in 4.13

Senux

Hello,
There is ability to use ports firmware files for devices (shown under ports menu as firmware - version 5.24). I understand that it is possibility to upload to router some firmware aka drivers for devices that is not recognized by routeros. So what is type of those files?

Senux

Hello, from the end of 2012 many providers start to sell new LTE cards Huawei E3276s also named as K5007 in Vodafone, M150-1 in Megafon and no older cards, like Huawei E398 are available. When new 4 gen cards will be supported in Mikrotik routerboards for example in RB751, RB951 series? LOOKS LIKE M...

Senux

IMHO: 1. Switch ADSL modems into transparent bridge mode (by yourself or ask provider) - your benefit will be full control with mikrotik 2. IP addresses ranges must be different on sites. Use routes to connect both lans. It is possible to use same ip range on both networks but not conventional for s...

Search found 34 matches

Re: LHGG-LTE6 Kit (RBLHGGR) - Only 100Mbit/s over LTE

Re: v6.39.1 [current]

Re: v6.39.1 [current]

Re: v6.37.3 [current] is released!

Re: 4G LTE cards (4gen) support request on RouterOS 6

Re: VPN not working after migration to Mikrotik

Re: Using Huawei E3372 3G/4G stick

Re:

Re: Hairpin NAT configuration

Re: Failover work with 8.8.8.8

Re: Hairpin NAT configuration

Re: Hairpin NAT configuration

Re: MikroTik IP ARP Print Mac 00:00:00:00:00:00

Re: MikroTik IP ARP Print Mac 00:00:00:00:00:00

Re: Remote connect to mikrotik behind NAT

Re: v6.35.2 [current] is released!

Re: RB951G-2HnD strange problems with wired LAN connection and random appear ghost IP in ARP

Re: VPN / PPTP Server - VPN Client cant ping others in the Network

Re: I hate this F*!@en thing!

RB951G-2HnD strange problems with wired LAN connection and random appear ghost IP in ARP

RB951G-2HnD strange problems with wired LAN connection and random appear ghost IP in ARP

Re: Huawei E3372s support

Re: Huawei E3372s support

Re: How to use a Huawei E398 4G USB-Stick with Mikrotik OS 6.34?

Re: Powering USB devices with mikrotik router.

Re: Mikrotik does not recongnise Alfa wireless card AWUS036H

Re: After restart device the PPP connection is not established

Re: Mikrotik and Huawei E3276

Re: 4G LTE cards (4gen) support request on RouterOS 6

4G LTE cards (4gen) support request on RouterOS 6

Re: 5.24 released!

Ports -> Firmware: type of firmware files

4G LTE cards (Huawei E3276s etc) suport request

Re: IP problem in IPsec tunnel