MikroTik

macosoft

Don't get hung up on just checking the filter rules, just because you think that's where the mistake lies. Maybe the rest of the address-list configuration in the firewall and the other BGP parameters can be also wrong... Simple test: remove all filters. On default, if a filter is present, the acti...

macosoft

Macosoft, I think your last 3 rules should be: add chain=from_rds disabled=no rule="if (dst-len>-1) {set distance 50; accept}" add chain=to_rds disabled=no rule="if (dst-len>-1) {reject}" comment="Should not be needed - default is to reject" add chain=to_telekom disabl...

macosoft

you can use this as a starting point and also discard is no longer available please read the document https://help.mikrotik.com/docs/display/ROS/Moving+from+ROSv6+to+v7+with+examples https://help.mikrotik.com/docs/display/ROS/Route+Selection+and+Filters Thank you, but I've tried those links before ...

macosoft

Hello, I've updated from ros6 to ros7 and BGP filters seems to not work anymore. In the ros6 the config it's this: [admin@ros6] /routing filter> print 0 chain=from_telekom prefix=x.x.96.0/23 invert-match=no action=discard set-bgp-prepend-path="" 1 chain=from_rds prefix=x.x.96.0/23 invert-m...

macosoft

Hello, We have a problem with BGP after updating from 6 to 7. From router I have internet connection and I can ping websites. The problem is that I don't have acces from our public ip networks (we have 2 networks /23). The filters in ros6 are like this: from_provider1 - prefix: x.x.96.0/23 (first pu...

macosoft

We have the same problem after updating from 6 to 7, but from router I have internet connection and I can ping websites. The problem is that I don't have acces from our public ip networks (we have 2 networks /23). The filters in ros6 are like this: from_provider1 - prefix: x.x.96.0/23 (first public ...

macosoft

You can always connect to your hotspots and see what the script does. That is no assurance, just empty words. Assurance means how are you financially responsible if something goes wrong, including damages and loss of profit. Are you for real, or just trolling my post? In Romania we already have 5 h...

macosoft

so I asure you that will not happen
How?

You can always connect to your hotspots and see what the script does.

macosoft

That is a crime in our country, so I asure you that will not happen. Also, you will have access to your hotspots and can see what's happening there.

macosoft

Basically how this works, we load ~10 lines of Javascript on the hotspot login/splash page. This collects generic information about the hotspot users, similar to Google Analytics. No personal information is collected. With enough geographic coverage, we can sell this aggregated data to our customer....

macosoft

We want to pay for access (one full user) on public hotspots made with Mikrotik routers and located in Eastern Europe.
Anyone who's interested to get 10$/month/hotspot is welcome to send me a private message or just comment here.

macosoft

The same problem here too. I've got 2 pairs of S3553LC20D and tested with 2 x CRS125-24G-1S and then with CCR1036 and CCR1009 without any luck.
The link it is ok, but not passing any traffic. How can we solve this? (other OEM modules works fine).

macosoft

My RB1100AHx2 is at 57C cpu temperature, and none of the fans are working.
Same as chojrak11 said, the router tries to use fan main, then auxiliary, then none.
What should I do?

macosoft

Problem solved.
The serial cable was the problem.

I changed the pins like in here
http://pinouts.ru/DevicesCables/apc_sma ... nout.shtml

and all worked out.

macosoft

yes, QpoX, i did that but seems like no connection at all.

macosoft

How can I connect a APC Smart UPS to RB1100? On serial is not working.

macosoft

Still cannot comunicate with the UPS.

Model: http://www.apc.com/products/resource/in ... SUA750RM1U

macosoft

OK, I typed: /system console disable 0
Now it let me add ups on serial0 but it show as offline and all red text.

Is there any tutorial on how to setup APC UPS on serial?

macosoft

I have a 750 VA APC Smart UPS and a RB1100.
I got connected the serial port from UPS to Console RB1100 and in Winbox when I try to add the UPS on serial0 it say:

Couldn't add New UPS - port's channel is already in use (6)

Is there another serial connection on rb1100?

macosoft

Yes, I need to know how to make a VPN tunnel with a mikrotik router.

macosoft

Hello,
I need a solution to share a folder over internet (with user and password - offcourse).
Anyone can give a solution?

macosoft

I have created a 100 MB download users. After the user downloaded 100 MB is not automaticaly disconnected from router, and can download how much it can. If the user logoff then the manager is not alowing to reconnect. How can I setup the hotspot that user manager see when a client is reaching the do...

macosoft

I already registered for MUM 2011

Anyone knows what Hotels is in the area?

macosoft

Anyone?

macosoft

We are a small WISP and we need to hire a professional MT consultant to help us setting a few things: - We want to set the network as hotspot with public IP's without NAT (/24 class) - In the network we have monthly postpaid clients and some linux servers (webhosting) we need a solution for these to...

macosoft

venky145: how did you manage to install radius manager 3.8? I have tried for about 2 days and I still get some errors on make and make install.
This guys have a forum or some support for radius manager?

macosoft

I cannot setup a hotspot on bridge interface with public IPs. All my clients cannot connect to internet after setting a hotspot without masquerade.

Have anyone succeded a hotspot without masquerade?

macosoft

RC2 and RC3 blocks all traffic from my network to gateway. I have a public IP class and I dont have any routing system.

Downgraded to RC1 and works fine.

macosoft

Try wincommander. Is working great on any type of windows and also have passive mode.

macosoft

Ok fewi, but I'm very beginner on subneting... and mikrotik also.

I need IPs from 1 to 20 on servers bridge and IPs from 21 to 255 on hotspot bridge. How should I do that?

macosoft

I need to set 2 bridges: one with 4 ethernet ports (for servers) and one with 6 ethernet ports (for wireless access points). In my wireless bridge I intend to setup a hotspot and on bridge for server I need to leave it out of hotspot. Now I have a single bridge. My curent config is like this: on eth...

macosoft

It is fixed on RC1?

macosoft

Tnx for your reply dssmiktik. It helps alot.
If I need to set up hotspot on bridge1 (ether5-ether12) and leave ether2-ether4 for servers (ip from 80.97.140.2 to 80.97.140.20) how should I set my subnets?

macosoft

You see... AP North, East and West are sector antennas and on them I have connected about 50 clients (like client1 and client2). 1. How do I get download/upload rate limited for each client if I set them on IP bindings? It will work adding them after that as simple queues? 2. If I set on IP bindings...

macosoft

Here's my network configuration: http://i54.tinypic.com/2py7swy.jpg I need for client1 and client2 not need to authentificate if they have the correct ip and mac address (if they are tring to change the ip or the mac address they will be redirect to the hotspot login page), and hotspot clients need ...

macosoft

This is just I want to setup into my network: hotspot with public IPs. My question is now how a user authentificate by mac address and IP in add user and not by ip bindings. How should I add in hotspot users someone who will authentificate by mac address and ip? (I tried with a username and mac adre...

macosoft

Yes, I have readed today. It's just my config there.

macosoft

Tnx for the replyes Tim. I still not understand why I cannot use directly public IP's for the hotspot users?

macosoft

I have about 50 stable clients who I dont want to authentificate to the hotspot and they need public IP's because some of them have video surveilance system on theys home and need to get access to it from internet (just an example). On my network will also be some AP's who will be open for laptop us...

macosoft

Tim, my goal is to setup the router as hotspot, and some client to authentificate automaticaly by mac address and others by hotspot interface. All clients need to have public IPs. First I need to setup a hotspot on a single interface for testing before I put it on the whole bridge. How should I set ...

macosoft

How to disable a hotspot who is not even made?

What is netmap?

macosoft

I need to set the hotspot with public IP's for the clients.
So, users who connects to the hotspot should have 80.97.140.x IP's.

What subnet should I set in this case?

macosoft

I have this IP configuration Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK BROADCAST INTERFACE 0 ;;; Internet 86.127.70.132/26 86.127.70.128 86.127.70.191 13Internet 1 ;;; Local 80.97.140.1/24 80.97.140.0 80.97.140.255 bridge1 Local connection is made by public IP's on bridge1 (eth...

macosoft

Done. Now it's working. And you have +1 karma

Tnx!

macosoft

Hello again fewi! /ip firewall nat add action=passthrough chain=unused-hs-chain comment="place hotspot rules here" disabled=yes add action=masquerade chain=srcnat comment="masquerade hotspot network" disabled=no src-address=10.5.50.0/24 add action=masquerade chain=srcnat comment=...

macosoft

I have a public class of IP's 80.97.140.0/24 and the ether13 have the IP 86.127.70.132. My computer who have manually set IP 80.97.140.99 shows me when I go to ripe.net that I have IP: 86.127.70.132 :shock: /ip route print Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - ri...

macosoft

I'll give it a try tommorow because I dont have access at night where the router is, and if I make something stupid I'll have some mad clients on my head till morning.

Thanks for your support fewi! I'll let you know if it's working.

macosoft

1. just set the MAC address, don't set the IP But I need to have the IP and MAC bound somehow for preventing IP stealing between clients. :) If I set in IP binding both MAC and IP address, the client should have both or it will provide internet access just with MAC and ignore the IP I set in the IP...

macosoft

For customers that are to be bypassed go to IP > Hotspot > IP Binding and add entries for their MAC address, setting the 'type' dropdown menu to 'bypassed'. Those people with those MAC addresses on their equipment won't have to log in. 1. If a client have a MAC address who is on IP bindings, but no...

macosoft

Thanx for your replies fewi! I need to bypass the hotspot for most of the clients, and for users who accidentally connect to my access point to have the hotspot login with information about how to be client in my network.

I intend to leave open my 2,4 ghz ap's for advertising.

macosoft

OK, but why is used the address and mac address when I add a user to the hotspot and login by MAC in the server profile?

macosoft

Does the hotspot work if my network clients have static public ip's setted on they LAN?
I mean they will have internet access without login? (if I make a hotspot and add users for each IP/MAC)

macosoft

I have a wireless network and all the clients have public IP's.
I was wondering if I can use in the same time PPPoE and hot-spot (on same bridge interface) and manage all from user manager?

I need this to separate permanent clients from laptop users (who need access just few hours or days).

macosoft

Nobody uses proxylizer?

macosoft

But most of my users have manually IP set, and sometime 2 or more users have the same mac address, but different IP (because on some access points the client have all the same mac as the AP).

macosoft

Hello all! I have installed proxylizer on a ubuntu server. I also have a RB1100 router who passes the traffic from my network to internet. Every user from my network have a public IP, so the router is not doing NAT or webproxy. I have tried to set some rules into loggin to remote server ip and port ...

macosoft

Same error on userman on v5.0beta6 too.

Can someone fix this pls.!

macosoft

User manager beta4 is working on routeros v5.0beta5 or should I need to downgrade the routeros as well to beta4?

macosoft

I need to know if I can use my routerboard to act as a remote log server for the network devices. I use alot of UBNT and I need to set them all to one log server. Ideeas?

macosoft

Thanks! It's working now

macosoft

Maybe is a silly question but after each restart the clock on my RB is back to Jan/02/1970.
What should I do?

macosoft

I have downloaded the ppc version for my RB1100 and now the login page is ok, but after login I got this error and the browser freezes: The following client application error has occurred: --------------------------------- Cannot process ServerMessage (Phase 1) Error Name: TypeError Error Message: l...

macosoft

I have made all the steps from the manual but when I try to access http://routerip/admin I get: Error 404: Not Found
If I try http://routerip/userman I get a blank page without any error.

Any ideeas?

macosoft

Thanks for your replies blake! The things is this way: I already have a linux router who does what I have asked before, but now I have a RB1100 (with 13 ethernet ports) and that could be more helpfull for me to use it instead the linux router and another switch. I have my own 256 class IP (80.97.140...

macosoft

No, I want to distribute internet access only to those IP who have a specific MAC address. A user have a certain IP address and a MAC address. If he try to change IP the router should not give him internet access. Same user if changes his network card and set same IP should not have internet access ...

macosoft

I have tried on routeros 5.0beta5 and is not working. I cannot access that webpage after I have created a user from console.

macosoft

I have a small network and I need to link MAC address of the network card on IP to prevent IP stealing inside the network.
How can I do that?

macosoft

Yes blake, they already doing that.
So, I need to set 86.127.70.132 on ethernet 1 and 80.97.140.1 on ethernet 2 - 13.
Do I need to bridge all the ports toghether, or manually assign 80.97.140.1 to each port?

macosoft

I have internet connection to one IP: 86.127.70.132, then I have my own 256 public IP's 80.97.140.0/24. My RB1100 should have on first ethernet port the connection to the internet (86.127.70.132) and on the other ports should have 80.97.140.1 to be a gateway for my network. All the AP's will be in b...

macosoft

Hello forum,
I have a small wireless network with a /24 public IP's.
What routing protocol shoul I use: OSPF or BGP?

P.S.: The network will have a single RB1100 router, after that just switches and clients connected wireless with public IP's.

macosoft

I have uninstalled the dude 4.0beta2 and reinstall Dude v3.6 on routeros and windows and now works.
Maybe is a bug on that beta.

macosoft

Yes, my dude client is 4.0beta2.
I have used both IP address and MAC address to connect in the winbox to the Routerboard, and works in both cases.

macosoft

[admin@MikroTik] > /system package print Flags: X - disabled # NAME VERSION SCHEDULED 0 system 5.0beta4 1 dhcp 5.0beta4 2 X ipv6 5.0beta4 3 hotspot 5.0beta4 4 mpls 5.0beta4 5 security 5.0beta4 6 routing 5.0beta4 7 X wireless 5.0beta4 8 routeros-powerpc 5.0beta4 9 routerboard 5.0beta4 10 ppp 5.0beta...

macosoft

It's a new routerboard 1100, with no firewall rules.
I got it for testing and bridged all the ethernet to bridge1.
I can connect to that IP with winbox, but dude got that error.

What could be wrong there?

macosoft

Tnx for the reply normis. I have downloaded and installed dude for windows from mikrotik website, tried to connect to my router ip and in the lower left corner I have an error witch I cannot read it: "Error: Connect fail: No connection could be made because the tha....." How can I see the ...

macosoft

Hello, I just got a Routerboard 1100 and need to install Dude server on it. Got the server from mikrotik.com (PPC) copied into root folder, rebooted the routerboard. In the logs I got that Dude server is installed but I cannot find it anywhere. I got just a file into packages and when I try to enabl...

Search found 76 matches