MikroTik

petro25

http://www.mikrotik.com/download/share/ ... be-6.9.npk

petro25

restoration! !
1 . the button to reset a configuration. to reboot.
2 . to load 6.7.npk
/ system package downgrade
reboot
3. the button to reset a configuration. to reboot
4 . /system routerboard upgrade
reboot

petro25

What's new in 6.8 (2014-Jan-28 10:19): *) bridge - default protocol-mode changed to RSTP for new bridges, fixed bridge mac address changing when port (with lowest mac address) goes down *) userman - improve startup time; *) sstp client - support server name verification from certificate; *) wireless...

petro25

after updating Firmware 3.11 aren't loaded any more
it is checked on several RB751U-2HnD !!!!!!!!!!!!!!!!!!!!!!!!!

petro25

I confirm the problem. part 5 sxt r2 not connect to 20\40 if you are installing only 20 worked . part 5 sxt r2 didn't work at certain frequencies, for example in the range 5300-5320 not seen base. when changing frequencies on 5180 everything works. (we are talking about nv2). I have 30 clients conne...

petro25

@n21roadie
3- nstreme --- Data Rates - default
4 - nstreme --- Data Rates - configured - only MCS15

petro25

over each drawing it is written

1-NV2
2-802.11
3-4 -nstreme

petro25

Lakis don't trust the eyes?

petro25

how it to explain? intended damage of the protocol nstreme?

NV2

802.11

nstreme

petro25

BUG CPU

petro25

In the new version of the report the problem remained Level of noise in the given direction-115 range of 56 km There can be a problem in the hardware? Signal level shows-74 quality of 97-100 % connection 120х120 log BSU 01:45:36 wireless,info 00:0C:42:64:52:7B@wlan1: reconnecting 01:45:36 wireless,d...

petro25

the same disconnect problems 'NV2 bridge 56 км ки 411 r52hn (baza) aug/05 21:57:24 wireless,debug wlan1: 00:0C:42:64:52:7B in local ACL, accept aug/05 21:57:24 wireless,info 00:0C:42:64:52:7B@wlan1: connected aug/05 21:58:22 wireless,info 00:0C:42:64:52:7B@wlan1: reconnecting aug/05 21:58:22 wirele...

petro25

the same disconnect problems 'NV2 bridge 56 км ки 411 r52hn (baza) aug/05 21:57:24 wireless,debug wlan1: 00:0C:42:64:52:7B in local ACL, accept aug/05 21:57:24 wireless,info 00:0C:42:64:52:7B@wlan1: connected aug/05 21:58:22 wireless,info 00:0C:42:64:52:7B@wlan1: reconnecting aug/05 21:58:22 wireles...

petro25

Hello Normis, Is ticket #2011072166000401 fixed in this release? Thanks, Dzieva 5.6 version include improvements for wireless and NV2. Have you tried v5.6 on problematic link? Do you experience the same disconnect problems? NV2 bridge 56 км ки 411 r52hn (baza) aug/05 21:57:24 wireless,debug wlan1: ...

petro25

routerboard: yes model: SXT 5HnD serial-number: 293D01686D71 current-firmware: 2.32 upgrade-firmware: 2.35 [admin@GorBolnica] /system routerboard> settings export get print upgrade [admin@GorBolnica] /system routerboard> upgrade Do you really want to upgrade firmware? [y/n] y firmware upgraded succe...

petro25

HELP

[snmp_wireless_link_info()]

Doesn't work dudle beta3 Ros v5.4

petro25

the command leads to crash of system and impossibility of its further use !!!

RB450G ! V5.4

/interface ethernet switch
set switch1 mirror-source=none mirror-target=none name=switch1 switch-all-ports=no

Has helped to keep a configuration transition with the help netinstall on version 4.17

petro25

There is no I not it meant

NO EoIP

need VLAN

petro25

___________Vlan1 (id1) -- bridge -- Vlan1 (id1) ---Bonding_________________________________bonding -- ___________Vlan2 (id2) -- bridge -- Vlan2 (id2) ip 10.222.100.1/30 ip 10.222.100.2/30 ip for control 0 R name=bonding1 mtu=1500 mac-address=00:0C:42:A3:AA:67 arp=enabled slaves=vlan1,vlan2 mode=bala...

petro25

Here one of them

The lack doesn't consider azimuths

http://www.linktest.ru/

petro25

The request here to throw off references to programs and resources allowing to count: a profile of a line signal attenuation
And to spread on how many precisely there corresponds the settlement data with practice

petro25

Hello, I have this configuration: 2x RB411 + R52n-M 1x RB433 + 2x R52n-M 4x GRID 5GHz 27dB RB411 client ->((( ~14km )))->[5640MHz] AP RB433 [5540MHz]<-((( ~15km )))<- RB411 client Mode is 5GHz-only-N (MCS 0 - 6) Signal ~ -70 When I try TX bw test from ap to both of clients it works fine, but when I...

petro25

Me there is a dependence of level of a signal on humidity of air! And during humidity change quality of a signal falls!

petro25

On what this parameter influences ?

petro25

Has occurred at addition VLAN on bridge1 Why aren't added Bonding VLAN which hang on bridge? rb800 jan/02/1970 06:00:06 system,error,critical System rebooted because of kernel failure jan/02/1970 06:00:06 system,error,critical router was rebooted without proper shutdown (cause 1) jan/02/1970 06:00:1...

petro25

link 78KM rb433 r52Hn nstreme (nv2 not stabile) fr 2.4G

petro25

http://www.linktest.ru/

petro25

Give the link on v5.4 pre
petro25@mail.ru

petro25

I confrm the ETHERNET PROBLEM onm RB4XX up/down costantly, no problem with prevous releases. regards Ros we are unable to repeat it, we have many RB411 devices on our test system right now, we don't see any port flapping. Can you email us a complete description of your setup, and supout.rif file? I...

petro25

I confirm a problem rb411 at me they in different cities behavior identical rb411 novosibirsk 07:26:27 interface,info ether1 link down 07:26:29 interface,info ether1 link up (speed 100M, full duplex) 08:04:27 interface,info ether1 link down 08:04:28 interface,info ether1 link up (speed 100M, full du...

petro25

It is observed such on rb411 in different places on v5.2 all well 05:41:54 interface,info ether1 link up (speed 100M, full duplex) 05:42:51 interface,info ether1 link down 05:42:53 interface,info ether1 link up (speed 100M, full duplex) 05:45:07 interface,info ether1 link down 05:45:09 interface,inf...

petro25

It is observed such on rb411 in different places on v5.2 all well 07:23:37 interface,info ether1 link down 07:23:39 interface,info ether1 link up (speed 100M, full duplex) 07:26:27 interface,info ether1 link down 07:26:29 interface,info ether1 link up (speed 100M, full duplex) 08:04:27 interface,inf...

petro25

Very much I want to see in the following version grathing for radio

1) Noise level
2) Signal level
3) Speed of connection
4) Quality of tx of rx

petro25

Very much I want to see in the following version grathing for radio

1) Noise level
2) Signal level
3) Speed of connection
4) Quality of tx of rx

petro25

Noise-97 sometimes in an operating time from for it interrupts communication
After reboot noise level-116

http://petro25.sytes.net/out/supout.rif

petro25

Radio problems
Noise-97 sometimes in an operating time from for it interrupts communication
The similar occurs even indoors

petro25

It is not visible Russian font

petro25

About I use http://sibdata.ru/catalog/cid/104/372.html http://sibdata.ru/catalog/cid/139/560.html http://www.spektr-tv.ru/supral1.2pol.php radio r52Hn RX\TX -67\-67 180\180 43 km RX\TX -72\72 90\90 78 km RX\TX -55\-55 300\300 31 km OK (sorry don't read Russian? ) but my guess from those links, you ...

petro25

http://petro25.sytes.net/out/sxt-43km-nv2-.png http://petro25.sytes.net/out/sxt-43km-nv2.png (supral 1.2 + SXT5Hd F5100) 43 km cell radius 43 TDMA Perriod 5 ping 5 - 10 ms +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ http://petro25.sytes.net/out/201.png (2400) 31km cell radius ...

petro25

About I use

http://sibdata.ru/catalog/cid/104/372.html
http://sibdata.ru/catalog/cid/139/560.html
http://www.spektr-tv.ru/supral1.2pol.php

radio r52Hn
RX\TX -67\-67 180\180 43 km
RX\TX -72\72 90\90 78 km
RX\TX -55\-55 300\300 31 km

petro25

radio r52Hn rb433

It is malfunction of the equipment or an program problem??

petro25

You can show options and schedules?

petro25

Incorrectly quality

petro25

On distance more than 40 km disgustingly work the nv2 Sharply level of a signal falls and level of noise raises. Inclusion interface deenergizing helps on the bridge rx -70 to -84 noise -115 to -97 on the station bridge All in norm You interchange the position of base and client options The picture ...

petro25

nv2-noise-floor-offset How set it? Has found about results I will write On 56 km hasn't helped Though quality of 82/97 % 20:27:55 wireless,info 00:0C:42:64:52:7B@wlan1: disconnected, control frame timeout 20:27:57 wireless,info 00:0C:42:64:52:7B@wlan1: connected 20:28:05 wireless,info 00:0C:42:64:52...

petro25

HAS SENT ON MAIL FILES
I can give access and include by turns different protocol

Then for communication write icq or skype

petro25

I resulted schedules above At what moment to do "support output" communication normally only for not clear reason fades or reconect. Sometimes even wotchdog works thus on nstreme 100 % quality Why on nv2 more low signal level?? Same the transmitter and receiver characteristic instead of th...

petro25

Uldis That will tell about the report nv2 on distances more than 40 km ?

Whether the help in testing is necessary?

petro25

1) problem EoIP Ceases to pass the traffic (rb750 rb433AH) The following helps /interface eoip disable eoip-tunnel1 /interface eoip enable eoip-tunnel1 2) On distance more than 40 km disgustingly work the nv2 Sharply level of a signal falls and level of noise raises. Inclusion interface deenergizing...

petro25

1) problem EoIP Ceases to pass the traffic (rb750 rb433AH) The following helps /interface eoip disable eoip-tunnel1 /interface eoip enable eoip-tunnel1 2) On distance more than 40 km disgustingly work the nv2 http://petro25.sytes.net/out/5_0.png 10:20:04 wireless,info 00:0C:42:62:E3:9A@wlan1: discon...

petro25

RC12 Faster than 5.0 !!!

On distance 55км test udp

rc11 - 45 Mbit
rc12 - 75 Mbit
5.0 - 45 Mbit

petro25

At the big loading on rb411 falls Ethernet port reboot or deenergizing port inclusion helps! It is checked up on several devices. On rb433 the similar it was not observed

45 megabit 20000 ppc

petro25

Whether it is possible to adhere radio options not to a poppy to the address and to a socket on a payment? And that is strongly inconvenient to change burned down card !

Whether dependence of quality of a signal on a traffic priority will be corrected?

petro25

Qeueus off

Qeueus on

Problem or norm??
Why quality of a signal depends on a priority of the passing traffic?

petro25

Why quality of a signal depends on a priority of the passing traffic?

petro25

At me such law on radio! Range of 42 km. Signal level-67. Transmitters r 52Hn. 5rc11. The report nstreme Loading from 3000 computers rx85M tx22 mb. Communication constantly falls also bad CCQ 60 % Connection 162х162 ping on the bridge 15-30 ms Having established 0 name = "queue1" parent=wl...

petro25

petro25, write to support@mikrotik.com with description on your problem and also maybe provide access to the link.

Has sent

petro25

petro25, maybe it is because you are using frequency (2529) that it is outside the standard frequency ranges. Also increase the nv2-cell-radius to your approx distance as by default the cell-radius is set to 30km. The point costs on this frequency a year In the previous versions of the such it was ...

petro25

Allocated red the parameter jumps 62-92
Where to dig???

What RB model? RB433 or RB433AH or something else?

rgds

5rc11 rb800 nv2 42km bridge station-bridge tx162 rx 108-162 fr 2529

The same point nstreme

petro25

Allocated red the parameter jumps 62-92
Where to dig???

petro25

Whether it is possible to make onboard schedules of level of a signal for each channel of level of noise and speed of connection?? I think it will help with radio perfection. And to make an input on schedules under the password! There is no need all to look successively! The filter on ip is strongly...

petro25

100 % CPU
http://petro25.sytes.net/supout.rif

petro25

Bad work of the report nv2 wds distance of 45 km a frequent dying down of the traffic and throughput falling

Till 12 o'clock nv2 after 12 nstreme

rb800 5rc10

petro25

????

http://petro25.sytes.net/autosupout.rif

petro25

need Function for radio parameters "is necessary to apply for 5 minutes"

petro25

Crutch for VLAN
To add in automatic loading the following script

/interface vlan set vlan1 use-service-tag=yes
/interface vlan set vlan1 use-service-tag=no

Well and to hope that in following release will correct

petro25

In 5RC7 VLAN works!

RC8 RC9 RC10 doesn't work!! After reboot to it no MAC in VLAN

petro25

Whether it is possible to add in following assemblages a variable on decrease in sensitivity of the receiver?? It is rather useful in зашумлёном an ether

petro25

As that not from a hand all to reconstruct
At me two flights on 70 km loading nearby 80 megabit. The processor is loaded on 80 % I think that ptp will kill him

VLAN nv2 station-bridge Doesn't work

If behind the bridge and in front of the bridge to put routers that VLAN passes

petro25

VLAN after reboot doesn't work!!
You change number starts VLAN to work after reboot again doesn't work!
5RC9 (rb411,rb433 radio nstreme nv2 wds )

petro25

rc5 rc6
rb411 r52hn nstrime 56km SNMP

no route
bridg wds
Problem 100 % CPU
http://78.40.84.226:12111/graphs/

petro25

rb 800
http://178.49.144.5:12111/graphs/

rb 600
http://178.49.144.6/graphs/

petro25

dudle on
rb 433 - cpu 60- 75 %
rb 411 - cpu 45- 60%
rb 800 - cpu 25- 40 %
rb 600 - cpu 75 - 80 %
rate 56 Mb

dudle off
rb 433 - cpu 56- 63 %
rb 411 - cpu 40- 50 %
rb 800 - cpu 25- 38 %
rb 600 - cpu 50 - 57 %
rate 56 Mb

brdge + WDS no route no nat

petro25

At inclusion of control by means of the program dude it is sharp down throughput of a communication channel and increase ping between points by radio with 4 мс to 12 мс.

petro25

problem dude 4 beta 1
os 5 RC 4

petro25

petro25

# NAME VERSION SCHEDULED 0 system 5.0rc1 1 routeros-powerpc 5.0rc1 2 X dude 4.0beta1 3 X dhcp 5.0rc1 4 X ipv6 5.0rc1 5 X hotspot 5.0rc1 6 wireless 5.0rc1 7 routerboard 5.0rc1 8 ppp 5.0rc1 9 routing 5.0rc1 10 X mpls 5.0rc1 11 advanced-tools 5.0rc1 12 security 5.0rc1

petro25

[admin@MikroTik] > tool profile duration=10s
NAME USAGE
wireless 5%
snmp 13%
ethernet 4%
console 0%
flash 0%
firewall 0%
winbox 0%
logging 2%
management 45.5%
idle 18%
profiling 0%
queuing 2%
bridging 8%
ppp 0%
unclassified 2.5%

management 45.5% - ???????????? RB-800 5 RC 1

petro25

add to winbox "Apply button for 5 minutes"

petro25

on the RB800 does not start Dude v4.0beta2

petro25

Hello. I would like to see a new version of the following configuration rollback feature on the timer. since it is usually placed on the radio long distances this feature will be quite handy. For example put a value then it is said that to use it for 5 minutes. After 5 minutes he returned to the sta...

Search found 81 matches