If you are able to evaluate the link quality, why not to set the distance metrics according that? Good point, if you already know who is the main ISP you only have to assign it the lowest metric. Example: [admin@Router] > ip route print # DST-ADDRESS PREF-SRC GATEWAY DISTANCE 0 A S 0.0.0.0/0 [IP GW...

Hi, i've tried two different methods: 1) By assigning to every interface a route and then routing traffic through it with different metric. That actually works. 2) By applying VRRP, different solution - equal result. But the question that seems that no one can answer is: How to do a smart failover c...

so

we are still waiting for the results, share please =)

Do you have any vlans?

i've had problems with vlans transport on that version.

Attach some config please.

Hi, Filter over layer7 protocol works fine

Please attach config.

regards.

Hi, sometimes default config is set to deny all connections on eth1.

You can try:

1) Connect your cable to eth2,3,4 or eth5.

2) Be sure of have all the other interfaces idle, i meaning wireless, other ethernet....

3) Be sure of having any firewall disabled (specially windows firewall)


Regards.

Hi, there is no way to help you with that post.

We need at least a bit of your configuration to understand what you got in your RB.

revive |

A long time ago i've seen that wireless card neever will show you AP frequency... you can get this data from any client.

Regards.-

In Windows, that's normal.

That's Right, it happens to many others aplications.

So, don't worry and keep on with right click, it's just one more step.

no ideas???

Questions: What type of AP are you using? Do you have SNMP enabled on the AP? Are you able to get other data Via SNMP? ??? it only works in station ??? * Hi, thnx for the answer * AP mode = AP bridge on RB 433ah, rb 411, rb 133c. * SNMP is enable * i can get snmp data from anywhere otherwise i've a...

hi all, I'm trying to configure "the dude" to see all my AP frequency. possible way? sure, SNMP ...... but doesn't work! ! ! !.... it works only in Station. I've try a lot with Oids in Appareance, as a test, and consulting from a linux... any other idea? i think it's useful, and I'm realy ...

Hola, este error habitualmente te lo da cuando el OID es incorrecto (tal cual dice) pero no se que es lo que querias visualizar con eso... pero bueno, fijate haciendo click derecho en tu dispositivo general de red y anda a la opcion visualizacion, y ahi ponelo en "default"

you have a good power source? i mean, maybe it's an electrical trouble, can you check that?. off: if you think that it's a hardware issue, you should post all your hardware devices. I am currently out at the facility and have found that I can only get into the ap in question sporadicaly. Usually I g...