MikroTik

inertia

Hello, I am using RIP v2 within my network. I have got a RB450 in the network. Currently RIP is running such that it is set to use Routing Table Main. I have got another routing table in the router which is called Divert. I want all the routes learned from RIP to be in both the routing tables main a...

inertia

Hello, I have got three routers connected in series as shown below : R1 ...... R2 ...... R3 I am trying to setup an SMS Alert service if any of the router fails. I am trying to use Netwatch, I have added the script for both UP and Down. The problem is that if R1 fails then R2 and R3 will also fail i...

inertia

Thanks for your reply. I have been trying to Install Cacti on my PC but were unable to do so. Does it requires to be installed on webserver or i could do it on my local pc as well.

And how to do it.

Thanks

inertia

Hello,

I have got a link between two mikrotiks (RB1100). I want to monitor the traffic on this link. I want to monitor the data going through the link in sort of graph or figure for any specific time or day in past. Is there any way of doing it through mikrotik.

Thanks

inertia

Hello, I need to setup DNS on my mikrotik (RB1100). The interface between mikrotik and my pc is : Mikrotik : 192.168.0.113/30 PC : 192.168.0.114/30 I want to setup my mikrotik such that mikrotik resolves the DNS and keep the entry in the cache from future use. I want to use open dns 208.67.220.220. ...

inertia

Hello, I have got a DHCP server setup on RB1100. The devices at the other end acting as clients are normal ADSL modems + routers. In the DHCP leases, the starting characters of MAC address seems to be changed by mikroik. Like one of the device has got MAC address of 00:23:54:71:xx:xx but in the DHCP...

inertia

Hello, I have got three mikrotik routers and one HP Switch, One of the mikrotik is connected to HP switch via fibre link. The devices are connected in the following order : RB1100 --------> HP Switch ---------> RB450 ------> RB1100 --------> Customer Network 0.74/30 0.73/30 0.69/30 0.70/30 I have go...

inertia

Hello, This question is not related to mikrotik I have got a link between two places and i think that there is a packet loss somewhere over the link. Could anyone please suggest me any software which i could run on two computers at each end of the link and the software will let me send packets from ...

inertia

Thanks for your reply, but is that 'Yes' for 'Crossover Cable' or 'Straight Through' ???

inertia

Hello,
I have read on the forum that we could see CRC errors by setting up SNMP. Could someone please tell me the configuration for that? How to set it up?

Thanks

inertia

Hello,
I have got two mikrotik routers one is RB1100 and the other one is RB450. I need to connect both the switches, which cable will i require 'Crossover' or 'Straight'.

Thanks

inertia

Hello, I have got an RB1100 in exchange. I could access it from my office because it has got an Public IP. I want to do a speed test from the mikrotik. Is there any way to do it apart from taking my laptop in the exchange and plugging it in there and then perform the speed test from speedtest.net or...

inertia

Thanks for your reply on both threads. Your given solution worked for me. Thanks again.

inertia

Hello, I have got an office setup where all the employees are connected through a switch and that switch is connected to one of the interface of mikrotik. There are three catagories of the employees interns, consultants and management. What i want to do is that when an employee opens up his/her web ...

inertia

Hello, I have got around 20 Users connected to my mikrotik RB411. I want to make few user priviledge levels and define them to my users according. To make it more clear, this is what i want: 1. When user turn on his PC, it is going to ask them for ID and password. 2. Depending upon the ID and passwo...

inertia

What time is set for Lease?

inertia

I have got two RB411 working as AP bridges and another RB411 working as station. Right now station is connected to one of the AP bridge. Is there any way that i could make second AP bridge a redundant link. So that if the original link fails, my station automatically switch over to the second AP bri...

inertia

But isn't that for specific MAC address. I will have to enter MAC address myself??

inertia

Hello, I am using User Manager 4.11. Currently i have got my hotspot completely set up and everything is working fine. I want to add another feature into it, which is that i want to give free internet to the user for 30 mins when he connects to the hotspot for the first time. Is there any way to do ...

inertia

Hello, I am using User Manager 4.11. Currently i have got my hotspot completely set up and everything is working fine. I want to add another feature into it, which is that i want to give free internet to the user for 30 mins when he connects to the hotspot for the first time. Is there any way to do ...

inertia

I have got a RB433 AH, i was trying to upgrade it from version 4 to version 5. I copied the file in the routerboard and restarted the board so that it updates the version. But during the upgrade power was plugged off by accident and now i can not see the routerboard in Winbox. I can not access it at...

inertia

I am using RB1100. If i go into logs, i could see log entries upto only 3rd Oct, is there any way that i could see log entries older than that???

inertia

Hello, I have got a wireless link within my network. When i check log entries on my router board, i could see the connection being disconnected and connected very oftenly. Some times it happens within the same second and some times it takes 12-15 seconds to reconnected. I have attached the log entry...

inertia

Hello,
I have got a hotspot working. When user goes upto paypal payment and made the payment, i want to redirect him back to splash page. Is it possible to do so???

inertia

I have changed the time, as well as installed the NTP. But still same problem.

inertia

Hi there,
Is there anyone who is using user manager and getting payments through paypal. I need some help regarding what versions of user manager and router os is he using etc????

inertia

Yeah i have got everything in the radius server setup properly. Because if a create a user myself, then i am able to login and use internet and in ip/hotspot i could see an active user from Radius sever. I am attaching the snapshot taken from usermanager for payments.

inertia

Hello, I am using user manager 4.11 on a rb411 board. When i log in as a customer and go to credit and buy credit. It shows me the message of secure login and when i press 'click here' it takes me back to the user sign in page rather than taking me to https://route_ip/status?subs=public_id. Can anyo...

inertia

In my paypal account, it shows me that transaction completed.

inertia

Hi there, I have got user manager test 4.11 on my rb411. The problem is that when a customer makes any payment through paypal, the payment is successful and money leaves his account but the problem is when i check user manager payment status, it shows me Paypal Socket Error and the customer can not ...

inertia

It is nothing there in log regarding the transaction.

inertia

Nothing stopping in firewall. I have checked it from Shields Up and everything seems to be fine.

inertia

Thanks for your help. I could now go to paypal every time. But still having the same issue of Paypal Socket Error. Could anyone please tell me how to resolve it???

inertia

I have not got SSL certificates on router. But i have unchecked secure reply from paypal. Still getting same problem...

inertia

Hi there, We are having some problems regarding the paypal payment through user manager. Even though the entries for the paypal website as described on the wiki are in the walled garden, the RB doesn't let the user access the site if the first transaction fails. Second problem is that even when the ...

inertia

I need to do a MAC traceroute from RB1000. I want to see MAC address of every device that comes in between. Could i do it in winbox or any other software?

inertia

I have attached another traceroute. You could better understand my question now.

inertia

If what you are telling is right , when i use icmp and ping 4.2.2.2 from rb1000 it reaches there but breaks multiple times in between the route. How could you define that?

inertia

I have attached now both traceroute results. The time outs that i am getting are all at the ips that does not belong to my network. And you could see when doing a udp trace route it is showing me that the host is un reachable.

inertia

I have got a RB 1000, if i trace route for the open DNS which is 208.67.222.222 using ICMP protocol it works out fine. But if i change the protocol to UDP it can not find the route to open DNS. Also when using ICMP i get a time out in between the route. Can anyone please help me. I am using VOIP pho...

inertia

yeah you are right, but i think i cannot explain my problem properly. I think my system is under DoS attack. I could see burst of data coming in from the ethernet port of rb1000 which is connected to my backhaul. After around every 30 seconds or so i got a burst of data of around 60-70 Mb coming int...

inertia

Hi, We have been facing this problem where the connections tab in the firewall section is showing huge amounts of connections (somewhere around 20000) and the CPU usage of the router (RB1000) spikes upto 100% from time to time. How could we trace and limit the hosts responsible for these huge amount...

inertia

I am using an RB1000 for my network. I have got only about 200 customers but in the IP firewall connections i could see thousands of connections being established which does not seem right. It looks to me like there is an script running on someone's pc which is establishing all the fake connections....

Search found 43 matches