This may be an next issue of the Atheros 9220 chpset. Dbii network replace their F52N-PRO to the older F50N-PRO.
http://dbii.com/forum/viewtopic.php?f=2 ... 60d07729b5

Try removing the dst-address-list parameter and add dst-address-type=local. I'm too green to understand the difference in the operation but it works.. Thx Code example: ip firewall nat add chain=dstnat dst-port=80 action=dst-nat protocol=tcp dst-address-type=local to-addresses=192.168.0.10 to-ports...

Remove the dst-address and add in-interface=wan, replacing wan with your ISP facing interface name. Don't know why but this can’t work for me. I’m novice in Microtik os and it’s hard to find ready-made solution for dynamic IP redirection and the other one hundred questions about Microtik os. Today ...

the same lien you can use in script

OK it works now when i marked (enable) all policies, I do not know which are required in this case.
I tried this before but without enabling policy
and it don't start my computer.

Hi all

How to translate this wake on lan command to script?

Hi I'm beginer with Microtik I try to redirect an selected IP or MAC address to hotspot which is on a different interface but I don't know how. I have configured RB443 with no bridge. i'm using ruting with NAT and masquarade. My Hotspot is working OK. on vlan2 interface (10.5.50.1/24) And i try to r...

...
The other is to use two network interfaces on MT connected to cable modem so each would get it's own IP, and then do DMZ thing for server.

Could somebody give me example setup for DMZ when public IP is variable?
The all exampes which I found look as they were made for static IP only.

My ISP gives me two public IP addresses, so I try to use them both. I would like to configure the RB433 as pictured. The problem for me is to configure the MT, the server receives the IP address from the modem. Or as an alternative to set the DMZ for the server. But the DMZ configuration examples I ...