Hi dadoremix,
I have attempted tcp also (please see picture below) this results in no bandwidth either way:

Hi Guys, i have a strange problem with either my router config or my ISP. I have recently changed ISP's and now when i run a bandwidth test to one of the public btest servers - outlined here --> http://forum.mikrotik.com/viewtopic.php?f=2&t=104266 i can get upload but absolutely no download. Whe...

Hey Guys, i have vlans 21 through 26 on my RB450G but i cannot Ping between them, say for example i want to get to a shared folder on a computer on vlan 26 and i am on 21 ( all vlans are using different address ranges) do i need a firewall rule for this or a NAT accept rule? ifso.. any examples? tha...

just on another note... im having a problem trying to run a script from another script.. i cant seem to work out the "run script XXX" command i have => :local runner 1 :if ([$runner] = 1) do={ system scripts run USAGE_REPORT_TEST1 } but its not running "USAGE_REPORT_TEST1" script...

Check all the policies required for the script to run scheduled. When in doubt, check them all. According to the screenshot you posted all policy permissions are denied right now (no checkmarks are showing at all). Thankyou very much :-) i ticked the write policy and the scheduler works now... its ...

Hi Guys, i have created a script and when i click "Run Script" from inside winbox it works fine.. so i have now created a schedule to run this script.. but its not working.. for testing i have set the interval to 20 seconds.. i can see the run count inside the scheduler window going up.. b...

Anyone got any ideas on this?

Hi Guys, im really strugling on how to work this out.. if anyone could point me in the right direction it would be much appreciated so this is my problem. i have a router (lets say Router 1) with Vlans 1-6 and networks 10.10.1.0/24 to 10.10.6.0/24 on these vlans.. all on ether2 and hav my modem conn...

Hi Guys, im sorry but i cant seem to work this out.. basically i just want to deny access to the internet on a certain vlan.. i have my switch connected to Vr0 and my modem on Vr1 and all i want to do is drop packets if say "VLAN number 27" try's to go through Vr1.. any help would be much ...

Hey guys, so im still pulling my hair out over this setup... i cannot account for any data on any MAC address on a wired connection to the router.. i have setup a hotspot and set mac authentication but i cannot get any traffic reports in user manager for the mac addresses that are wired to the switc...

Which interface is the hotspot on? Is there a hotspot or ppp set up to use radius on the wired interface also? Hi there, the hotspot is on a Bridge interface.. i have setup two hotspots identically.. both set to use different bridges on differnt VLANs. both these VLANs only have one device each con...

Has anyone got any ideas on this problem?.. could it be a problem with the way i ahve the netwrk configured in the first place?

Ok so.. the MAC authentication is working now.. but i cannot get any traffic accounting working for the Wired connections.. i have my PC and a VoIP phone adapter connected to a managed switch on their respective vlans abd user manager is showing no traffic in its logs... i have connected a mobile de...

Thankyou for the quick reply, i will give that a go..

will continue to work with user manager to see if i can account for traffic..

cheers

Hi Guys, just wandering if some of you could help me out with this config.. im having trouble accounting for traffic of a user in user manager, and having problems with MAC authentication.. even with only MAC selected in the hotspot setup i am presented with the Mikrotik hotsport login upon opening ...

Hi Guys, thanks for your help thus far.. ive had to change the approach on my setup a little and have decided to go with a MAC authentication in user manager.. it all is working ok now on the wireless clients but i cant seem to account for traffic on the wired connections.. ive read that dhcp cant d...

thankyou

Hi Guys..

just trying to create the first subscriber for user manager in the terminal section of router os but im getting the error below.. am i doing something wrong? thanks

Can anyone shed some light on this problem? ive had a think about it and id like to keep the 8 separate Virtual AP's and somehow allocate a user for each AP so i can do traffic accounting for each "user".. so i need the user to be associated to the AP and Loged in all the time.. for exampl...

Hi Guys.. im very new to MikroTik and user manager.. as you can see from my other post here http://forum.mikrotik.com/viewtopic.php?f=2&t=46823 .. i was just wanting some clarification on something.. i have setup 8 different Access Points.. (not hotspots) and would like user manager to account f...

Hi Guys, just got my box up and running .. love it!.. as this was purpose built im still yet to figure out how to use routeros for monitoring bandwidth.. as most of you have probably guessed.. i live in a flat with 8 people and want to monitor the wan bandwidth everyone uses so i can send them a bil...

Hi there, as youve probably worked out, im wanting to put routerOS in and Alix board.. ive dont some googling but i cant seem to get a definite answer... is there a way to flash the routeros image to my Compact Flash? is this the correct way to install router os on this system.. as i dont have a vga...