Accidental deletion can be undone with the "Undo" button in Winbox, or Undo command in console. If you want to be protected against connection loss, use Safe Mode in addition to Undo command. Thank you very much! You saved me hours with command. btw: I couldn't find this command in Winbox...

Thx for replay.
Then your solution is almost same as on this video:
https://www.youtube.com/watch?v=alHn2XZLgVI
Only difference is that you proposing the connector and the guy did it with direct soldering on mainboard.

Nothing work reliable after 3 walls. Ad a second router.

With another TP Link router, I have full signal..and it spread the signal till midle of street, so I do not agree with u!
Anyone with right way to solder the pigtail cable?

Because the wifi signal is terrible!
I can not watch the youtube video after 3 walls (of 40cm) diagonally on 15m.

I searched this forum and I coudnt finf neither one complete tutorial how to modify motherboard to add the external connector with antenna for this router. All the pic in threads are dead links. Only thing what I coud find are these two video, but It is not clear do I need to do this for both antenn...

Thank u a lot..
That is what I exactlly searched for!

But I need in MT because the test need to be made on cellphone, over wifi.
Edit: I can use my Orange PI as a wifi AP with LAN as IN interface and WIFI as out interface, and that is what I wanted.
Thanks a lot for idea I will try!

I would like to simulate mobile network 3g H+, and to get ping on wifi, on some ip address let it say 192.168.1.102 between 100-200ms.
Is it posible to increase pint time per ip address?
If yes how?
Thx

This is the only script what worked for me:

Or you can try this script.

Thx mate..
This is only script what worked for me!

If it is not too late... this is how I would do it / did it:
2. create static ARPs (this links the IP to the MAC)

Thx mate..
I spent hours till I found this solution!

convert your network to bridged one, with one IP subnet for all computers

ok,thx

the solution is to forget about neighbourhood

Very funny..
I need neighbourhood..any solution?

btw, Network Neighbourhood requires single broadcast domain, so it won't work between different subnets even with WINS

And..what is the solution?

Well - looks likes your options are limited - perhaps you could convince Microsoft to release a custom version of NetBIOS for you LAN requirements

Very funny!

Add Ethernet and WLAN to bridge and use same one up range

It is important for me that all wifi devices which connect to wlan gets ip from pool different than LAN pool!

Thx for helping me!

I setup SAMBA to work as WINS and I can pinf pc and laptop by hostname..
Only problem is that I still can not browse through network
How to setup SAMBA for this?

You could force all users to use DNS in the router and manually assign names. But this won't help seeing other machines in network neighborhood.

Is this not finished work in mikrotik or bug?

I have seen this problem many times - remove masq rule 2 as posted - you DON'T want masq onto LAN - this is what is stopping you see your workgroup No mate.. The second rule in NAT was put because of someone suggest me to try this! I use without it, but today I added just to try! SO any other solut...

Correct. I think you can also setup a WINS server in Linux if you need to.

Thx but is it only solution??
I can not do something in mikrotik?
I can belive that is so complicate!

This is not a problem with the Mikrotik. For the NetBIOS name service to work on different subnets you will need to setup a WINS server.

wins server is not a part of mikrotik Am I right?
Do I need to setup new pc for this?

So the main problem is that I have NOT file sharing between LAN and wifi (wlan1) interface! For exmaple: Pc1 win7 have:192.168.50.1 ip address (lan ethernet) laptop win7 have 192.168.60.1 ip address (wlan1) I can ping from PC1 ip address 192.168.60.1 I can ping from laptop ip address 192.168.50.1 Bu...

I can''t belive that is so complitated!
It must be some simple solution in firewall!
Maybe I will out this post in advanced topic.

The problem is in your masquerade rule - you have not specified an outbound interface, so router OS is doing a masquerade between the LAN and WLAN interfaces. This will block SMB. Add an out-interface to masq rule and it should all work. First, thx for helping me. I tried.. with this rule: /ip fire...

Problem is probably just with the names, because they are broadcasted on subnet and therefore doesn't reach to another subnets. Try to access the computer with IP address instead of name (enter to explorer addressbar \\192.168.50.1). For the names you can setup DNS server on RouterBoard (maybe ther...

So the main problem is that I have NOT file sharing between LAN and wifi (wlan1) interface! For exmaple: Pc1 win7 have:192.168.50.1 ip address (lan ethernet) laptop win7 have 192.168.60.1 ip address (wlan1) I can ping from PC1 ip address 192.168.60.1 I can ping from laptop ip address 192.168.50.1 Bu...

Anyone?

Anyone?

Anyone??

I have a next situation: Have a 2 interface OUT and IN. Out interface is connected to switch and setup a DHCP server with pool:10.10.10.1-10.10.10.9 The IP address of OUT interface is 10.10.10.10, and DHCP working very well. Now, I have a extern AP wich is setup like a client and connected to my wif...