MikroTik

falestiny

same problem is here.

falestiny

Dears, I'm not able to open the user signup page even i follow the instruction but it does not work, it's always shows normal user manager page for logining but not for signup, is it a bug with Mikrotik latest version?! I'm using ROS v 6.20 Thanks in advance. Edit: signup login page is wrong in Mikr...

falestiny

could you post your configuration here?

falestiny

what version you are using?

falestiny

try PPTP without encryption then everything will works fine.

Give Karma if answer was useful.

falestiny

if ports are not bridge then firewall is enabled by default.

If I helped you please remember to give Karma

falestiny

check the forward rule counter if its increase or not.

falestiny

mark the traffic going out of your network then route it throw your l2tp connection.

falestiny

also there is a bug with encrypted VPN connections since OS version 6.8 and not fixed until this moment.

falestiny

I prefer you also update your OS to the latest mikrotik version.

Good luck

falestiny

you did not mentioned which RouterOS version you are using at the moment?

falestiny

do not forget to enable the option "use ip firewall" in bridge setting.

falestiny

simply you cannot do this.

falestiny

Reconnect button when connection is lost would be something!

+1

falestiny

make sure this option is enabled otherwise all firewall rules will not be applied to bridge ports.

falestiny

did you enable "use IP firewall" option from bridge settings?

falestiny

now in Turkey

falestiny

hmmmm its seems to be hairpin issue.

try to add the below lines to your nat firewall configuration:

add action=masquerade chain=srcnat comment="Hairpin NAT" dst-address=\
192.168.20.2 out-interface=bridgeLan src-address=192.168.20.0/24

falestiny

are you able to ping the SIP server from vpn client?

falestiny

Well i have PCC configuration and 2 WAN interfaces load balance with one of my clients and it works fine at their local network but i never try PPP connection with this configuration.

I'm originally from Gaza but the whole my life living abroad

falestiny

as far as i know it should do load balancing and not speed merge.

check the below link, it may help you.

http://mum.mikrotik.com/presentations/US12/steve.pdf

falestiny

it's working with me without any problems.

falestiny

well that's right

falestiny

you should do simple queue for each ip address separately.

falestiny

please post your configuration to check.

falestiny

well solving such bugs are throw Mikrotik support team

falestiny

Yes. Encoding MPPE128 stateless.

I just checked and exactly, there isn't this problem when encryption is disabled

perfect

I guess that i deserve karma for solving your issue and finding a bug

falestiny

You were right. Days looking for the solution and the problem was in my cablemodem provider :P Sometimes we just need another point of view. I'm waiting my provider to give me another modem and do some tests. Regards! EDIT: After the change of the cablemodem , everything is working like a charm! :D...

falestiny

Hi, when i'm connecting through the vpn pptp connection to the router with winbox i'm having frequent disconnections(the vpn connection remain established, only winbox will report that router was disconnected), why is this happening?

are you using encryption with PPTP connections?

falestiny

maybe the internet source connection having problems.

falestiny

I dont know what is writing to flash and is going from 85% ~ 100% at 2 hours uptime .

Anyone else has the same problem ?

The problem has been found on 751G and 951G routers . About 10 of them need restart to fix .

Thanks.

did you enable proxy option?

falestiny

it seems that my internet provider is blocking my SSH port

falestiny

ssh works, i use

did you try it from outside local network?

falestiny

can someone confirm if SSH or TELNET works find with this new release?! I'm trying to access my mikrotik remotely throw SSH or TELNET but it does not work. NOTE: it works from local network but not from out side, i do not have forward rules or filter rules. It working for me: [admin@ros-6.10(RB951G...

falestiny

can someone confirm if SSH or TELNET works fine with this new release?! I'm trying to access my mikrotik remotely throw SSH or TELNET but it does not work even does not show anything in logs. NOTE: it works from local network but not from out side throw PPPOe and i do not have forward rules or filte...

falestiny

can someone confirm if SSH or TELNET works find with this new release?! I'm trying to access my mikrotik remotely throw SSH or TELNET but it does not work.

NOTE: it works from local network but not from out side, i do not have forward rules or filter rules.

falestiny

did you enable (use IP firewall) option in bridge settings?

falestiny

I need a support here

falestiny

yes this should works fine, if you wants you can add contact info and location too.

falestiny

you do not need to mentioned anything there, just enable SNMP and leave other fields empty or disabled.

falestiny

did someone success to implement this scenario having two ports in bridge mode and was getting the traffic flow works with Ethernet bridge ports?! i have tried lot of ways but without success

any advise?

falestiny

from winbox:

ip -> SNMP -> enable

falestiny

for backup use the below commands in terminal:
/export compact file=[filename]

for restore use the below commands:
/import file-name=[filename]

falestiny

bridge wlan interface with the Ethernet interface port of Microtik.

falestiny

add distance=1 dst-address=192.168.3.0/24 gateway=XXXXX scope=10

replace XXXXX with your interface name in router2 which have the ip address 172.16.1.2/30

falestiny

thats normal and you do not need to worry about as its all dropped connection.

falestiny

after moving the hairpin rule try to clear all previous connections in connections tab.

falestiny

web proxy is not functioning probably, when it's enabled it does not disabled

falestiny

you have to select the parent in the first EXE-UPLOAD queue

falestiny

check the queue parent...

falestiny

try to upload files throw FTP.

Search found 51 matches