MikroTik

sarky

Thanks will do

sarky

Ok thanks for your reply it makes sense what you are saying. The Gateway is the ISP Router in the office which for some reason is down so I suppose in a situation like this I should do another net watch to confirm if it is down and if down to disable the netwatch for that ISP does that sound right ?...

sarky

Goodmorning All I have done 2 Netwatch scripts to check my internet connection and change the mangle rule if one fails. At the moment my main connection is not responding with a local ping so that means Netwatch should execute the Down script. In my Log I see Netwatch executing the Down Script then ...

sarky

Thanks

I don't know why I didn't think about the simplest method as just blocking external traffic to the DNS.

Added the rules, hopefully that should fix it.

Thanks again

Sarky

sarky

Good Morning All Just wondering how do I target this specific traffic, so I can add them to the list without affecting my local network. I have attached a screen shot showing same ip opened 2 connections to the router. protocol UDP on one SRC using port 80 ---> Hitting DNS and basically saturating m...

sarky

Trying to get my head around what you are doing!

You are setting up a public IP address on each port from 2 - 10 but port 1 is the Gateway to the internet .

How is port 2 set up as, does it have a DHCP Server setup to give local IP address to cluster of computers behind it ?

Thanks

Sarky

sarky

Hi ChangeIP

Yeah it is on the Same LAN and i have tried the above as i said before but for some reason it is not sending it to where it suppose to even tried srcnat but nothing happened..

Have you tried it yourself, i know it is done on hotspot by Default ..

Sarky

sarky

I have tried dst-nat before i posted the msg but for some reason it is not working, and then i thought it might because i am using REAL IPs all the way and nothing is being NAT. At the moment if i test with a telnet to port 25 it opens up a connection but does not show anything on the telnet page. a...

sarky

Hello all I have looked and checked all over but i did not see it, i want to redirect all Traffic from a specific Real IP to Port: 25 to my local SMTP server but i am missing the point, can someone please point me in the right direction? The aim of the above so the users do not have to change there ...

sarky

I have an AP running MT 2.8.27 with WDS-Bridge and hotspot on 2 Wireless Card and i have noticed that It is only registering WDS1 through WDS9 and i have more than 9 WDS clients on the network. My Question is, has anyone out there using similar setup achieved more than 9 WDS clients at the same time...

sarky

Hi all

Just wondering if anyone has seen restrictions with WDS with more than 9 unit loged in at a time?

Thanks

Sarky

sarky

Thanks for the reply but now if the AP masquerades it, it will masq to its local IP too. i am trying to change all my network to Use Fake IP just servers to use Real IP, if i open SMTP to take email from Fake IP some mail servers out somewhere will bounce them because those mail are originating from...

sarky

Hello all

Trying to figure out how to make all Ips trying to send mail to SMTP from local ip 10.10.10.0/24 to masquerade it to a real IP how do i do that??

Thank you

Sarky

sarky

I was thinking of redirecting all to local homepage with a status bar, and maybe a logout button on the homepage so they can use it to logoff the internet if that is possible what command do i need to do.

On the redirecting i tried to do as the MAN doc said but it is not redirecting.

Thanks

Sarky

sarky

Hello all

Just wondering what everyone is doing about this, considering majority of my customers have XP1 with SP1, and it blocks all popups.

Is there anychance to hide the fact that it is a popup?

Sarky

sarky

Hi Edgars

Yeah i know that Hotspot manager works in a different way, i have been trying for a while to do that via radius but i had to settle for activation style due to restriction with radius.

Can you give me an example of using a script to make it work another way?

Thanx
sarky

sarky

I am using Freeradius to do such a thing, but it works on activation process i.e: user logs in if the account is new then the user needs to activate the account using a php script when the account is activated then the user can log on and all the user account details will be copied to the right path...

sarky

Do you have URL of where i can price these items?

Thanks

Sarky

sarky

Hello all I have a WDS interface running under an AP, at the moment 3 clients are WDS and is set to static assign and i chose not to bridge the WDS interfaces with the Ether part. So my problem is trying to get all WDS to have a common interface so if i configure hotspot, i am configuring it for one...

sarky

I have configured the above WDS transparent, the reason why i chose WDS is to get some group of users to dial in using PPPOE through one Antenna. Now i found out that if a real IPs are put in the right places you do not need to dial in. How do i stop that and make sure everyone authenticate? onle on...

sarky

I will try to explain more what i want to do, I have some clients using the Senao CB3 which has 1 machine which uses PPPOE connection to logon or Hotspot, on the Same AP i want to put a CPE which goes into bridge mode and allows multiple PPPOE connections to go through it, 1 person called nhalachev ...

sarky

Just wondering if i set up WDS on the AP can i have a selection of clients ?
i.e 20 x Clients running of infrastructure and 10 clients running of Bridge mode Ad-HOC?

Thank you

Sarkis

sarky

Hi Again Thanx i have tried it but when it comes to the AP i got confused because on the AP it is another Routerboard with the Wireless Cards and one Ethernet port, if i Bridge the Wlan and the Ether what happenes to the last wireless card, it still uses the same etherport to communicate to the net....

sarky

Hmm I didnt think it was going to be a complicated issue, thought by bridging the ethernet and wlan on the Routerboard it will allow pppoe Requrests to go to the AP and get an answer from the AP direct, the way the example is set for wds, i have to set an IP address on the Wlan but for PPPOE securit...

sarky

I have about 30 users who will connect to the internet using the ethernet side of a routerboard. At the moment i have bridged the ether port and the wireless port, and i am seeing the main ap but i can not get any pppoe connections to go through. Is there anyspecial setting i need to set? Using lice...

sarky

Hello all, Well this issue it would be nice if it is a feature but considering it is not, i have to look for another way of doing it. Problem: User test1 logs on, and for one reason or another test1 looses connection but it doesnt kick him off, even with idle-timeout set to 180s. User test1 logs on,...

sarky

Well I have 2 MT boxes at the top of the Tower acting as AP, one down below in the base acting as a pppoe server for APs using FHSS system, and because i had an unstable machine a while back i decided to have a proxy running on one machine and due to processing power and RAM required that was the be...

sarky

Hello all, Need help with my network, i will try to explain the way the network is and if anyone has any comment will appreciate. Sat Gateway | Proxy MT | Switch --- MtikPPPOE | HOTSPOT Mtik Router Sat Gateway - Real IP Proxy MT - Eth1 & Eth2 Bridged with Real IP Mtik PPPOE - Eth1 Real IP - Eth2...

sarky

Thank you for you response but I have done all that and as i said i tried to ping the Wireless card with the temp address but it is not going through for some reason. The CPE i am using is a CB3, and i have turned off universal client. With universal client i know it worked. If anyone has any idea o...

sarky

Hi All I have configured hotspot to giveout temp IP and then real ip when the user logs in. The DHCP POOL for temp works just find but when i try to browse so i get the hotspot login page it does not work. If i ping the temp local address it doesnt reply or even if i change it to the real IP address...

sarky

Now this is odd, i have done this type of rule many of times but this one is puzzling me, maybe of the way my network is set. Network setup: Mtik Ether1 = Ether2 set as bridge Real IP and Fake ip Fake IP has a DHCP server running on it . 0 dst-address=RealIP/32:1111 protocol=tcp action=redirect to-d...

sarky

I saw the example it looks very similar to my setup apart from the example using ether-LAN and mine is using a bridge. the odd thing was with the setup i have i managed to get it working for one night but when the system crashed and needed a reboot it came back up blocking all real ips out. maybe it...

sarky

ionut What do you mean route the real ip, how can i route it, 3 ips from the /24 is out of the box and the balance i want to use it in the box.

Sarky

sarky

/interface bridge port print [admin@link] > /interface bridge port print # INTERFACE BRIDGE PRIORITY PATH-COST 0 ether1 link 128 10 1 ether2 link 128 10 2 Midwest3 none 128 10 3 OMNI4 none 128 10 4 PTI7 none 128 10 5 ENE6 none 128 10 6 WAR5 none 128 10 7 EFF8 none 128 10 The reason i am using bridge...

sarky

i forgot the /interface bridge print detail Flags: X - disabled, R - running 0 R name="link" mtu=1500 arp=proxy-arp mac-address=00:80:C8:F7:7D:7C forward-protocols=ip,arp,appletalk,ipx,ipv6,other stp=no priority=1 ageing-time=5m forward-delay=15s garbage-collection-interval=4s hello-time=2...

sarky

/ip route print 0 S 0.0.0.0/0 r 192.116.xxx.1 1 link 1 DC 192.116.xxx.0/25 r 0.0.0.0 0 link 2 DC 80.179.xxx.0/24 r 0.0.0.0 0 link /ip address print # ADDRESS NETWORK BROADCAST INTERFACE 0 192.116.xxx.115/25 192.116.xxx.0 192.116.xxx.127 link 1 80.179.xxx.3/24 80.179.xxx.0 80.179.xxx.255 link /interf...

sarky

Hello all At the moment i have pppoe working fine with fake IP and all is masqueraded but i want to be able to give real routable ips to customers but for some reason when the customer logs on with the real IP he can not ping anything outside the PPPOE server. I have proxy-ARP on the bridge network ...

Search found 37 matches

Re: Netwatch driving me Crazy [SOLVED]

Re: Netwatch driving me Crazy [SOLVED]

Netwatch driving me Crazy [SOLVED]

Re: Rule to target specific UDP traffic [SOLVED]

Rule to target specific UDP traffic [SOLVED]

Re: All Public IP, No NAT, and Simple Queues

Redirect All SMTP traffic

Restriction with WDS.

Masquerading Local IP to Mailserver

Hotspot POPUP and XP SP1 "Popup Killer"

Setting one common WDS interface.

Blocking Direct Access when using Transparent WDS

Setting Up WDS

USing Routerboard to bridge PPPOE connections

Script to kick PPPOE Connection

Changing my Network Need Help

Problems after configuring HOTSPOT

Redirecting rule not working

Using PPPOE with Real and Fake IPs.