Hi , is anyone trying to use USB wireless on ALIX 3D2 with microtic OS latest version ? I want to set up USB wireless like AP on ALIX 3D2 running with microtic ,because i don't have free MIniPCI .My question is : is microtic support USB wireless which i can use with ALIX 3D2 and if YES what manufact...

Hi i need more than 300 Mbit/s full duplex over distance ~ 5 km , the best thing i have accomplished with microtic ~ 200 Mbit/s half duplex ( 4 x CM9 and 4 antenas running in one box , P4 - 3Ghz )
I read about Ceragone , Ortogone ..smth else cheaper

I have similar problem:
http://forum.mikrotik.com//viewtopic.php?t=12452

Yes i think so but whit 4 x SR2 the box work fine ( ~ 220 Mbit/s in one direction ) , i try different PCI to MiniPCI on two different mainboard 865 chipset ..result is the same ..crash ot reboot :-( 4 x r52 work fine only with MikroTik RouterBOARD 14 miniPCI to PCI but with aditionall power suply wh...

Hi i'm using :
http://www.pcengines.ch/mpci1b.htm
CM9 and SR5 work fine ..do u think the problem is in PCI to MiniPCI adapter or power suply ot 3.3 V ?
4 x R52 work fine when i put them on MikroTik RouterBOARD 14 miniPCI to PCI ( with aditionall power suply to use it with SR2 and SR5 cards ) .

Hi i have a very strange problem : I put 2xCM9 and 2 x R52 on the same box running on Intel 865PERL or Gigabyte 865PE with 5 PCI slots.The sysytem freezes or rebooted after 1-2 min ..did'n rebooted if i disable all wireless interfaces .When i setup and enable 1 or 2 of them the system is freeze.I ha...

I have a stupid question
What is exactly difference between station wds and station mode ( the other side is bridge , PtP ) ?
Can i get best performance ( actual speed and low resources ) when i use station wds ?
10x

heheh 10x i expect rates similar using SR5

Hi , we have PtP link over 40 km with SR2 cards , signal strenth si -60/-58 dBm .I'm using Nstreme , exact size and framer limit=4000 ..station-wds .. 2.4 G Turbo .. But i have "pure" bandwith performance then the same link with SR5 ? With SR5 i got 60-70 Mbit/s in one direction , with SR2...

We have a problem with Microtic ver. 2.9.6; and wireless interface (SR5) on (P4 on 3 GHz, mb Intel) We make link over a distance of 45 km with the following hardware (P4, on 3 GHz , mb Intel, Microtic ver. 2.9.6; ) and 3 wireless interface (SR5) When we use just one wireless interface (SR5) the para...