MikroTik

hyp3R

I have now set MTU's as shown on the screenshot below and things seem to be working. I have also disabled the mangle change MSS rule for now. I will keep you posted during the day, cause I can almost swear that I've tried this before and that the outcome was different. So something feels really stra...

hyp3R

Sorry if I wasn't clear. Telenor, my ISP, is requiring anyone who's not using their provided router to use PPPoE. I don't have access to the Fiber modem nor I can fiddle with it at all. I spoke to Telenor support here in Denmark and they gave me pretty limited information. In a nutshell, they told m...

hyp3R

You have only to "determne the MTU from packets that are returning: /ip firewall mangle add action=change-mss chain=forward in-interface="Telenor PPPoE new-mss=clamp-to-pmtu passthrough=yes protocol=tcp tcp-flags=syn The MTU seems strange because the VLAN is 1492 and so the PPPoE MTU coul...

hyp3R

Hey guys. I recently bought two new MT routers. My main router is directly connected to the ISP fiber modem and it's "authenticated" using PPPoE. I've noticed that some websites were not opening at all, and then I stumbled upon https://forum.mikrotik.com/viewtopic.php?t=150377 which helped...

hyp3R

Hey guys. Recently I have used one of the guides I found on google to use L7 protocol under firewall to block Facebook/Youtube on the network. I m curious if there is a rule to allow one IP address on the network to be able to use it ? So basically everything works great, I just want my director to ...

hyp3R

I don't understand. Why did you use download on one interface and upload on another ? I simply want not to use full amount of internet we have (3mb), I want 2.7mb to flow in both directions so 0.3 is always free. So I don't understand the rules you wrote. Why did you name Download as LAN and the oth...

hyp3R

Hello guys, long time now see. Since I m back to some MikroTik configuring and such, I need a small assist from you guys, just to make sure I made it alright. Right now I m working for one VOIP call center and I have installed the network with cisco switch, RB433 and DLS modem. Since sometimes every...

hyp3R

I wonder if it is possible to make a log where it will show if users are trying to access facebook or youtube. I have installed a network in one VOIP (call center) with RB433. Network has 24 computers (22 Agents talking using SIP). I want to make a log for each of them or one log maybe which would s...

hyp3R

Karma added

, letting you know tomorrow!

Gonna get some rest, got a relief after solving this

.

Regards,
Aleksandar

hyp3R

Exactly and thanks for pointing that out, I was thinking "Why did I put dst-address there". Yes, I want to make that address bypass it all so source address will do :). Reason I can't test it now is because I m home and office is not working at the moment so I m doing it remotely. Once aga...

hyp3R

So something like this: 0 chain=forward action=accept dst-address-list=Director-Bypass add address=192.168.0.235 comment=Vaso disabled=no list=Director-Bypass Does this rule in address list has to be first in address list window ? Accept rule is first in filter list but do I have to make it first in...

hyp3R

Sorry, forgot about it. Address list (under firewall): /ip firewall filter add action=reject chain=forward comment="deny Facebook" disabled=no \ dst-address-list=Block-Facebook reject-with=icmp-network-unreachable add action=reject chain=forward comment="deny Youtube" disabled=no...

hyp3R

Hey there guys. I have a question regarding blocking facebook, youtube and such. I m administrating network in one VOIP (Call center company). I have blocked some IP range of facebook, YT etc (guide I found somewhere on Google) and it's working really well. Only problem I have is that I want to let ...

hyp3R

Thanks a lot of the help. We have realized it was about cable condensation... Switched the cable with a new one and everything is perfect... So many wasted hours :-). Seams such problems can't be found in books... You have to face them and realize what's going on... Once more, thanks a lot. Best wis...

hyp3R

I have just sent the technicians to change the cable. Past few days, everything was working great, since it were rainy days. Today, since it's sunny, signal went from -53db to around -85 and disconnecting. It would be kinda illogical to me that that roof can make that much of a problem. Cable is kin...

hyp3R

Move to another frequency for a day or so and check issue still happens, Tried, same thingy happened. Can you post with google earth both sites location, is there any building(s) in between with sheet metal roof's or any surface that could reflect the RF signal, do you have a option of temporarily ...

hyp3R

Hey there. This might sound stupid but it seams whenever there's sunshine (when it's sunny weather), this problem seams to occur. You will maybe laugh on this, but I have noticed that recently. Right now signal is -53/53db which is perfect and what could be reason for that ? I've done the bandwidth ...

hyp3R

Hello there. Past few days I've been having a lot of issues with one of the stations on my network and I can't figure out what's the problem. One one of the stations I have, signal is often changing and due to it, link to the other stations is reconnecting. I have also opened the thread which I didn...

hyp3R

Past few days, I've been upgrading all my stations to latest version of MT os, 5.0. I'm very satisfied by it's changes but there's a suspicious thing going on. Lately, we've connected a new station to our network. Since we couldn't directly connect it to your central ap bridge station, we have done ...

hyp3R

Hi. Few days ago our power supply used on RB600 died. Since we thought that's was the only problem, we have bought a new one and replaced but it seams that board is not working. When I plug it into a power, it starts booting (I've connected it to serial cable to see what's going on), it gets to the ...

hyp3R

Thanks Rodolfo for the wiki link, very useful and will carefully read it. @Ste, we have recently bought Spectrum Analyzer USB thingy, works great just past few days we didn't have access to a building roof so couldn't properly use it there. I ll send my technicians tomorrow to scan it all. And yes, ...

hyp3R

It seams that some frequencies can't be seen by user antennas. For example: Frequency 2462 can't be seen by users. There are some also too. Now, I m wondering if there is a list of "normal" frequencies which users can see, like the real channels that I can use. Here is the list of the freq...

hyp3R

Hello there my friends. Lately, since my network is pretty stable now since we've changed some hardware, I've been messing a bit with one of my locations (station) and noticed that users are having a lot of bandwidth problems, I'm guess because of the frequency overflood. That station is located at ...

hyp3R

Hi siscom, Before everything, I highly appreciate your help and you deserve all the respect that can be given. If I can help you with anything in a return, please let me know. When it comes to power and power thingies, sadly I'm not too much educated. Since only thing I can catch from your post is t...

hyp3R

It's kinda hard to calculate that but anyway there are 5 cards with RB600 & DB604 on it.
POE (Lan) cable is around 10 meters long, not more.

hyp3R

Past few days we've been going through some serious problems with RB600 and constant rebooting. Few days ago, we have plugged daughter-board 604 into it since we needed more cards (one more card) for another location which was connecting to it. Since than, we are experiencing serious problems with R...

hyp3R

You can export entire configuration by typing /system export file=filename in the terminal. I guess it should work that way if it won't let you backup it normal way, by using Winbox.

hyp3R

Thanks for your great answer and comment. Thing about my 3 stations is kinda suspicious. Since all my stations except those 3 are Routerboards, only those 3 are PC's and when I do the license print thingy it says: upgradable-until: jan/01/2008 That's why I have ordered 3 new licenses since it seams,...

hyp3R

I want to upgrade my RB1100 to latest OS version. Do I download the file from Series 1000 ? Since I can't find the package for 1100 ? Also, I have some stations with OS version 3 or lower and I want to buy version 4 license for them. What do I do ? I just send the ID of the mikrotik installed on it ...

hyp3R

It's working. Just like you said, I made a backup just in case something went bad, but all good. Uploading files via winbox and updating the stations, working alright so far.

Thanks a lot

!
Alex

hyp3R

If I upgrade to 4.17, will my configuration stay there ? If I simply use terminal and upgrade it there, my configuration won't be lost ?

hyp3R

Thanks a lot man. I have just upgraded firmware at 16 locations, version were different which might be the problem too. Also, we are using different OS versions at many stations which can be the problem too.

Do you suggest upgrading all the stations to latest version ?

Best wishes,
Alex

hyp3R

Currently we are using RouterOS 4.17 and I haven't done anything with the Firmware at all. Where do I download the latest version of it and in which way and how should I upgrade it ? Sorry for not knowing that but where do I change logging to disk instead on echo/memory ? And the most important ques...

hyp3R

Good morning everyone. Recently, our company have set RouterBoard 600 as a central ap bridge (link antennas on 5.8GHZ). Other stations are connecting to it. Past few days we are experiencing some problems with it. Often, very often, watchdog is resetting the routerboard and the last night, I had to ...

hyp3R

Hello everyone. First off, thank you very much, What you have done for us is something priceless. We have 13 zones (13 stations) on our network. Translation was going only through one IP address. Up to 50k connection were open. We didn't realize it can slow down internet so much. Our users didn't ha...

hyp3R

Thank you, but can I use to-addresses parameter with source PAT ? I know about mapping but I need the thing written above.

hyp3R

Hello there. Since I've red the manual and I couldn't figure it out. Is it possible to have more than one public IP address for source NAT (PAT) translation on the same physical interface? I want to use pool of public IP addresses for masquerading internal privately addressed hosts. Thanks in advanc...

hyp3R

Hey there. What I will try to do is next. Since my hotspot generates simple queue made by the actual packet speed on my hotspot, I will make manual queue and drag it over a hotspot default one. By that, my manual queue will hopefully have the priority over the HS one. Next, on advanced simple queue ...

hyp3R

Thanks for your replay. Whatsoever, if you are only answering people to get a post count, that's pretty much useless (no offense). I didn't ask for an advice. I've asked simple question and it would be pretty much great if you could answer it, if not, that's not a problem at all. Of course, more ban...

hyp3R

Hello everybody. I need an urgent help and would really appreciate if you could sort this out for me. I'm administrating network in a local wireless ISP company. Since we have lack of link (only 10mb on like 300 users), in the evening hours my internet is super slow and I can't administrate my netwo...

hyp3R

Thanks for your answer. Anyway, would you be kind to explain this a bit better and step by step how to make it. Am not very experienced with MikroTik. Still studying for trainings etc.

Thanks in advance,
Alex

hyp3R

Hello everyone. If I manage to set this up properly, it would be a huge plus to my network. Please if you could assist me with this, I would be really pleased. What I need is a simple queue which would set users to a certain bandwidth limit at a certain time. What I want to do is set download and up...

hyp3R

Hello everyone. I'm wondering if there's a way to program the stations on my network to reboot automatically at some part of the day or night ? Since I have 15 stations on my network (we covered 90% part of the city and some country side), it's kinda pain to reset em all manually every morning. Is t...

hyp3R

Hello out there. My name is Alex and I'm working in wireless ISP company. I have a RouterBOARD 1100 installed along with 2 computers in my office. One computer is radius server and the other one is dude server. Past 2 months strange things are happening. Computers just go stupid. What I mean is that...

hyp3R

Basically here is the thing. The new location we've installed, I simply followed the route list and added 10.0.1.7 to it since I didn't notice it's taken. Same with Area12. Since I've noticed the latest on the list is 10.11.x.x I figured out 10.12.x.x is the next one. I have checked FIREWALL under I...

hyp3R

Hello there. Yesterday I had to configure another board for a location on the network. Board is connecting directly to your central and my question is if my routing is fine. My Omni antena is 10.12.1.1 with network 10.12.1.0 and my ospf is area 12, 10.12.0.0 link ip address is 10.0.1.7... I've recen...

hyp3R

Thank you very much. It's seams there's ton of stuff I have to learn still.
Thanks for the great answers, I really appreciate it.

Best wishes,
Alex

hyp3R

Thank you very much. Now tell me. Should I delete those or ?

hyp3R

If anyone can assist me with this, please do.
Thanks in advance.
Alex

hyp3R

Hello. Recently I've started working with miktorik and on some of my routes list, there are several address that I think they are bad and I want you to explain me what does it mean DIO next to address and why is it red... Please check out the printscreen in my attachment.... Should I delete em or wh...

Search found 50 matches