MikroTik

nicmo

Hi to all, I need to reboot a device by ssh with a script, I need the script to login by ssh ip, username, password, send reboot command and to enter, reboot now, to confirm for the device to be reboot.

Thanks

nicmo

Hi is there a way to bind user to more than 1 caller id in user manager. is this feature available?

nicmo

Im still getting a error404 from when i try to go to signup page from login page.

nicmo

ok i done that but have slite problem, im getting error 404 not found. look like hotspot is blocking the page.
i disable hotspot it and tried going to the page and it work. is there a firewall rule i can use?

nicmo

ok Thanks

nicmo

Hi, i would like to add a button in the login page to take me to the signup page of UM, what should i add to the button to redirect from login to signup.html

nicmo

ok i will

nicmo

ok, i got winbox to connect from a different internet source with the rb ip but connect with the web browser any suggestion ?

nicmo

i would not know because im a new to this

I setup a account with change ip.com to match with my ip and i also let someone try frow different location but didnot work.

nicmo

i ment to login to rb 750 from a different location through the internet.

nicmo

Hi how can i setup my rb 750 with a static ip or a dynamic ip, so i can access it from anywhere over the internet.

nicmo

ok thanks

nicmo

Add ACL by mac and registration for ethernet port rb 750.

nicmo

my rb411 ethernet port is not rx how can fif this?

nicmo

Hi to all, I can not get this script to work on my rb750. The sep/1/2012 is in the comment of the user and when i run the script nothing happen. { :local offset 1 :global today { :local date [ /system clock get date ] :local montharray ( "jan","feb","mar","apr"...

nicmo

Can anyone help with this?

you can used this script.
http://wiki.mikrotik.com/wiki/Expire_us ... er_of_days

nicmo

Hi to all is their a script to alert a user that is time will soon expired, Im using this script to in how many days to expire>>> http://wiki.mikrotik.com/wiki/Expire_us ... er_of_days

nicmo

The "shared-users" setting allows more than one computer/device to log in with the same username/password. If you set "shared-users=2", then two computers could login with the same username.

Thanks again SurferTim, Is there a way to expire a session after a certain period?

nicmo

ok thanks i got it to work

What does share users mean under hotspot user profile?

nicmo

should i use the gateway ip as the dns?

nicmo

no i have to enable bridge to get internet.

nicmo

I selected none.
when i try to goto google.com, i got the web page is not available with http://www.google.com in the address bar.

nicmo

I change all those setting and still no luck. any other suggestions?

nicmo

Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, B - blackhole, U - unreachable, P - prohibit # DST-ADDRESS PREF-SRC GATEWAY DISTANCE 0 A S 0.0.0.0/0 192.168.0.1 1 1 ADC 10.10.10.0/24 10.10.10.1 bridge 0 2 ADC 192.168.0.0/24 192.168.0.2 brid...

nicmo

I disable the bridge because hotspot goes into red when enable. Flags: * - default 0 * name="default" hotspot-address=0.0.0.0 dns-name="" html-directory=hotspot rate-limit="" http-proxy=0.0.0.0:0 smtp-server=0.0.0.0 login-by=http-chap split-user-domain=no use-radius=no ...

nicmo

Im not getting hotspot page and no internet. Under hotspot host i can see my laptop with the dhcp ip address but nothing else is happening.

nicmo

every time i try, every thing goes in red. The VAP is attached to the bridge, could that be the problem.

nicmo

Hi How to create a hotspot on VAP, with rb411ar?

nicmo

Hi to all how can set my rb to get time and date from the internet because the rb reset to 1970 when i have a power cut or reboot.

nicmo

how to setup rb411ar 2.4ghz as a cpe to connect to a dlink ap router

nicmo

Thanks to all for the help.

nicmo

I thought that 900mzh could go through almost any thing?

nicmo

ok im looking into it to used just 1 repeater.
thanks

nicmo

Here it is.

nicmo

I posted the wrong picture above the correct one is worst than that one.
If I got to use a repeater for 900mhz so what would be the difference if i use a 2.4ghz radios?

nicmo

This doesnt look too good.!

nicmo

OK, tHANKS I WILL CHECK IT OUT.

nicmo

site A is about 6m, i need to go 8 more.

nicmo

I have a (AP) rb411ar XR9 15db grid antenna and (Station) rb411 XR9 9db yogi. What settings can i or should i used for a NLOS, from Site A to Site B is about 4 to 6 Km.

nicmo

Thanks again Surfertim, I got it to work and this is what i did, I dont know if im right, Flags: X - disabled, I - invalid, D - dynamic 0 chain=forward action=drop mac-protocol=ip dst-address=192.168.1.0/24 dst-port=80 ip-protocol=tcp You got to change the Mac protocol number to ip to edit the IP se...

nicmo

on the bridge filter i dont see were to put the IP address
Flags: X - disabled, I - invalid, D - dynamic
0 chain=forward action=drop

The ip address section cannot be edited.
If set Action to drop it block every thing in bridge filter.

nicmo

I disable those but i need to block the gateway page at ip 192.168.1.1

nicmo

how do i setup the firewall rule to block access to my modem login page?

nicmo

I normally use ap-bridge and limit the connections with "/interface wireless access-list". I set "default-authentication=no" Do you set both authentication =no, in access-list and interface wlan1? I have RB411AR as bridge and RB411 as station wds. If i change the AP from Bridge ...

nicmo

Thanks, it is working now

1. what is the difference between ap bridge mode and bridge?

2. how can I stop a client on the station side not to access my gateway login page on the internet modem?

Can I use dhcp sever on the station to give different ip addresses instead from the gateway modem?

nicmo

What way should i setup the RB for bridge. what i am planning to sent my internet from Site A to Site B then the Station Rb at site B connect to a switch with other wifi devices for many clients.

nicmo

ok im going to start from scratch, does it make a difference if 1 rb is level4 an the other level3

nicmo

wiki was for the 2 xr9 cards, the settings below is for the on board card. Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK BROADCAST INTERFACE 0 192.168.1.254/24 192.168.1.0 192.168.1.255 bridge1 1 192.168.1.3/24 192.168.1.0 192.168.1.255 wlan1 Flags: X - disabled, I - inactive, D - ...

nicmo

I still have the same problem, in winbox i can ping the gateway through the Station RB411 on the bridge interface but i cannot ping it with my pc on the ether1 port.

nicmo

Thanks but it still did not work.

Nicmo

nicmo

That settings is Station mode to see if i would have the same problem with the xr9 p2p. I follow the instruction to bridge the 2 xr9 cards but my main concern is that i can ping the internet gateway in winbox with the bridge interface on the station RB but not with eth1 and wlan and i think thats wh...

nicmo

i am having a similar problem, I got ip from modem but no internet.

nicmo

urferTim, I am putting a pause on the hot spot for right now. I need your help on this setup. I have a rb 411AR and rb411. The 411ar is my AP and 411 is Station both with xr9, I can get the both to communicate but my problem is to get my pc to connect to the internet through the station, got ip from...

nicmo

SurferTim, I am putting a pause on the hot spot for right now. I need your help on this setup. I have a rb 411AR and rb411. The 411ar is my AP and 411 is Station both with xr9, I can get the both to communicate but my problem is to get my pc to connect to the internet through the station, got ip fro...

nicmo

add the following: ip/address: address: 192.168.1.254/24 network: 192.168.1.0 broadcast: 192.168.1.255 interface: eth1 ip/pool name: pool-ethn1 addresses: 192.168.1.1-192.168.1.253 ip/dhcp server name: dhcp-eth1 interface: eth1 address pool: pool-eth1 dhcp server network: address: 192.168.1.0/24 gat...

nicmo

add the following: ip/address: address: 192.168.1.254/24 network: 192.168.1.0 broadcast: 192.168.1.255 interface: wlan1 ip/pool name: pool-wlan1 addresses: 192.168.1.1-192.168.1.253 ip/dhcp server name: dhcp-wlan1 interface: wlan1 address pool: pool-wlan1 dhcp server network: address: 192.168.1.0/2...

nicmo

Hi I found out that when i was pinging through winbox it was on Any interface. The only interface i can ping my internet gateway from is the bridge none of the others worked. Any suggestions??

Thanks in advance.
Nicmo

nicmo

In winbox go to IP>Firewall>NAT>Action>Masquerade ?
Should I do this on both AP and Station?

Nicmo

nicmo

How to configure masquarade and how to copy the configuration?

nicmo

Hi, I am doing a ground test with RB411ar as AP and RB411 as station mode, I can ping my internet gateway from RB411 wireless in winbox but not from PC. I got DHCP IP for the pc from the internet router through ether1 on RB411 bridge to the AP.

nicmo

I get the internet when i disable the hotspot it goe to the webox page. when delete all and start over i do a DHCP setup i got ip address and internet nothing is going my way for the hotspot. I have 3 devices My internet router, switch and RB. the internet router gateway is 192.168.1.1 RB is 192.168...

nicmo

I get the internet when i disable the hotspot it goe to the webox page. when delete all and start over i do a DHCP setup i got ip address and internet nothing is going my way for the hotspot. I have 3 devices My internet router, switch and RB. the internet router gateway is 192.168.1.1 RB is 192.168...

nicmo

thanks, I got the login page but after the I login, i am having a problem getting to the internet.

nicmo

Yes, I was using the same interface, can i use 2 different ip network like 192.168.1.1 and 192.168.2.1, one for the RB an the other for hotspot?

nicmo

I run the hotspot setup but it kills the communication each time i try to do it, i can not ping the RB ip, i of to login by mac with winbox.

nicmo

Maybe the cable was too long so i build a shorter one and it works great.
Thanks for all the suggestions.

nicmo

Yes I did.

nicmo

Thanks for the reply, I tried to connect via com port but the screen auto scrolls. Any suggestions?

Nicmo

nicmo

Hi to all, I have a problem with my RB411 board look like i disable ether1 with winbox not its not seeing the RB, how can i reset it to default?

Nicmo

Search found 69 matches