Hello, How to copy the content of a directory recursively inside the same router, in terminal? Just need to copy a directory, including all its files and subdirectories, to another directory in the same router, as simple as that. I have SMB running on 2TB share, and I want to do some scripting. Than...

The psu state is not available.

Hello MikroTik, There is no psu state information on MikroTik CRS328-24P-4S+. I have upgraded it to latest RouterOS 6.49.10, and still nothing about psu state. This is the health information that it is available: cpu-temperature: 57C power-consumption: 39.4W board-temperature1: 34C psu1-voltage: 26....

Hello MikroTik,

Why there are no more the following wireless tools:
1. /interface wireless sniffer;
2. /interface wireless snooper;
3. /interface wireless spectral-scan;
4. /interface wireless spectral-history;

Why they are missing in RouterOS V7, WifiWave2?
Do you plan to get them back?

Thank you.

Hello MikroTik,
I have a question, when Mikrotik is going to release: 802.11ax 4x4:4 Wi-Fi 6 Access Point, with PoE 802.3af/ 802.3at and wall/ceiling case?

Thank you.

Why link to strongSwan VPN Client?
It do not have L2TP...

Any news on this, the new Android can't connect to L2TP/over IPsec etc?

Is there a solution for this request?
The address-list=TimeOut continously refreshing timeout interval and never timed out, so no connection after address-list=NewIp timed out.

Yes, I put the script into the /ip dhcp-server inside the lease-script. I need to control WiFi connected clients, to have internet connection for an hour, and after that time to not to have internet connection for an hour. My idea is is to control that by /ip firewall address-list with timeout optio...

The above script does not work for me.
Is there a way to add dynamic dhcp leases to the ip firewall address list?

The "Advanced Routing Failover without Scripting" is even better. That is actually what I need. I just need 3 LAN to have 2 ISP with failover, 2 of LAN to go thru 1st ISP and third LAN to go thru 2nd ISP, no load balancing is actually needed. Can you please post the complete configuration,...

I have PCC setup, one router, two ISP, and three LAN. The questions are: 1. Is it possible to connect from internet to both static IP addresses, becouse i can't connect to PPPoE IP of the router? 2. How to setup LAN1 and LAN3 to go via ISP1 to the internet, and LAN2 to go thru ISP2? 3. How to config...

Could someone please post the full configuration of this setup?

Thanks.

and keep always-allow-password-login set to no : [admin@mikrotik] > /ip ssh set always-allow-password-login=no Password login is no longer possibly and brute force attack can never succeed. Regarding this, that is not actualy the case. Even with this option set to no (which is by the way already se...

Is it possible to configure port isolation on CRS326-24G-2S+ running RouterOS 6.41.3?

Still no luck, I have tried eight different RB912UAG-2HPnD and R11e-5HacD cards = NOT WORKING. For a brief period of time two boards are working, but the the "kernel panic" and reboots returns. Also, on some boards the eth1 interface start continuously disconnecting and connecting... Mikro...

Yes it looks like the hardware problem...
By the way, I've tried four different routerboards, PSU and R11 cards, but still the same problem.
Do you have the exact RB+card configuration in your production?

Mikrotik is there any update on this? I have the same problem with RB912UAG-2HPnD and R11e-5HnD card. I have tried to replace four different RB912 and R11e, also the PSU to 24V, 1.6A = without success. Changing the PoE and direct PSU to power jack = without success. Upgrade/downgrade RouterOS, lower...

Hello, I have a problem with the RouterBOARD 912UAG-2HPnD and R11e-5HnD miniPCIexpress card, working together. There is no way to make them work, all I get is: system,error,critical router was rebooted without proper shutdown system,error,critical kernel failure in previous boot The router is unstab...

Or if you insist, you can do this: :log info "ip info beginning now" /tool e-mail set server=[:resolve smtp.xxxxxxx.com] :delay 10s :log info "ip being emailed" /tool e-mail send to="xxx@xxxxx.com" subject=([/system identity get name]. \ " ip info") from=[/sys...

I want to run the PPTP vpn client over the internet with another BouterBOARD. But I want to continue to use the same internet for browsing... When I connect to the remote router, the internet of that router becomes my internet... How to keep my internet and to have VPN with another network over that...

Make log file: /log print file=log

Send it to mail: /tool e-mail send file=log.txt to=xxx@xxx.xx body=logfile subject=mikrotiklog

Than reboot: /system reboot

You must set up the system scheduler to activate these scripts at a regular time.

On RouterBOARD 112 I want to have two clients with two different networks, on one ethernet port. The goal is to have two networks on one ethernet port. MT AP--->wlan1---MTStation---ether1--->SW--->192.168.10.1, 192.168.11.1 I have tried to solve that with two vlan interfaces with different ID, than ...

In order to transparently connect two the same networks I have connected two routers by EoIP and it is working fine , but when I tried to access the network from the windows XP PC the error mesage is : workgroup is not accessible... The computers on the both sides are pinging each other and it is th...

I have solved the problem by deleting MikroTik winbox folder in C:\Documents and Settings\User\Application Data\Mikrotik.

I have two scripts one to make log file every day and second to e-mail to me . That is another way to solve the problem...

Try netinstall, connect router via RS-232 null cable, and with RJ-45 to switch and with router. All that you need to start netinstall.