Okay, thank-you for your reply. It would be nice (if any devs are reading this) if they could fix this so that the .backup files are interchangable. I can "copy run tftp" and then "copy tftp run" in Cisco easily enough.

I have twenty RouterBOARD 750's that we are deploying in the field. What I was attempting to do was simply a config in one and then backup and restore in the other routers to save time. The problem is, that once the backup file is restored in the other router ether1 has become ether2, ether3 has bec...

We have begun installing RouterBOARD 750's for our Ka Band Sattelite installs. We have received complaints from our customers that they are not able to access the internet. At first I believed that it was a problem with their wireless connections but I have now used the same configuration (one that ...

Hello, I have limited experience dealing with VPN setups and this is my first attempt at creating a dial-in VPN. We have some Mikrotik and some Cisco Routers and switches in the field and a Windows Server 2008 R2 (x64) in the office. All of the VPN examples that I have found online have just shown h...

Hello, I have been working with a Mikrotik technician to configure our RouterBOARD 750G's to be used in camps that have data and phones going over a satellite link. The links are @ 1Mbps down and 200kbps up. I am stress testing the voip using loic.exe as well as flooding the network with large ICMP ...

I do not have an SMTP server and frankly do not want the attention of "25/tcp open smtp" according to nmap scans! I have tried blocking it using: /ip firewall filter add chain=forward protocol=tcp dst-port=25 insert-before=0 action=drop and that didn't work. So I tried forwarding port 25 t...

well I guess I don't have to worry about Limewire anymore but I still need to block bittorrent traffic for our clients using the RouterBOARD 750G. I want to totally block it and not rate-limit it. I have had success using Cisco's NBAR and I hope the Mikrotik will work as well. I am trying: 5 ;;; P2P...

Hello, I need to prioritize voice traffic on network 192.168.200.0/24 (over data on 192.168.100.0/24). I have tried following a Wiki article on how to do it but my 750G does not seem to have the "tos" value (I have level 4 licence). Basically, I want to VoIP traffic to always be available ...

I did manage to get it working, the only thing I changed was I defined one interface as=Public and the other=Local. Then the NAT started to work.

Thank-you

Hello, I am new to the world of Mikrotik but have worked with Cisco, Linux, Win32 for a number of years. Yes, I have read the tutorial! I have added dhcp server and client and assigned them interfaces ether1 and ether5. I can ping out to the wan from the cli of Mikrotik router but not from connected...