The problem is resolved. Under those rules had mangle for QoS and other one was particularly crushing the mark-connection and mark-route is not applied.
Best regards.

Hello, although this is very old post I have an identical scenario with the same rules and the NAT does not work. I have two ISP connected to mikrotik and NAT to several different servers on the LAN. As described "infidel" just above: "If I change the default route to the other wan in...

Yes, I have connection tracking enabled because I use NAT. What I find really disturbing is that I have about 25 routers with VoIP services (Asterisk) running and just gives me problems some devices, and randomly. Another curious thing happens to me with SIP connections, if I lose internet connectio...

Hello, Today I reset to factory settings and tried the RB751 lower it to version 4.17 to see how it worked. I have found that with the RB that version does not work well, not detected when connected with an ethernet cable, you can only connect to it via wireless when freshly reset, and if you load a...

Hello, I have the same problem. MK drops sip's packets. My Asterisk goes timeout and doesnt authenticate with a public SIP server. I have two routers, one-2HN RB751U with version 5.22 and 493G with 4.17 When I connect the rb751 beginning to see the timeouts. Connect the RB493 and everything starts w...

Good morning, I'm working on a project to provide a wireless network at 2.4 GHz indoor to give Internet access to mobile devices (phones, PDA, Iphone, laptops, etc ...). The area to cover is a two story building approximately 30,000 meters. per plant, with local, open areas for recreation, etc ... I...

Ok, export your firewall conf.

Hello, do you have any radius server? because: /ppp aaa set accounting=yes interim-update=1m use-radius=yes this mean yes, and if you haven't got you must be disabled "use radius=yes" and use the "secrets" for authenticated. if you have a radius server then the user/pass is consu...

Are the antennas too close together? I've thought up another mast and separate at least 1 meter. do you think? Currently I have no proof that separating the antennas even more would have any benefit. If it works - keep them like they are. Check signal and quality levels in high traffic times. Thank...

This work has 6 sectors Ubiquiti XM5 with 17dBi antennas-90 º. These AP are in bridge mode and connected to a RB-493AH server does PPPoE, QoS. antenas.JPG In the box there are 6 feeds 24v to the AP, and two 15v for 2 NanoStation M5 that make PtP. RB-493AH 24V. Are the antennas too close together? I'...