It works fine. Tested with Cisco SG-200 P models. It’s better to get the Mikrotik 48v adapter though, it has higher output if you will be using multiple ports.

As Chupaka states to route traffic correctly with multiple WAN and respond to items on the correct WAN interface you have to use mange rules to mark packets to go over/back interface. Mikrotik has a PCC example you can use. It doesn't do failover but you can adapt the recursive route way and use PCC...

Use export to file. Then use terminal and past sections one at at time. It’s usually a OS version mismatch issue. I find pasting in terminal much more reliable but I don’t suggest importing the whole file at once. Make sure your autocomplete in terminal is set if not the paste command will fail use ...

I can also confirm there is no switch menu in webmin or webfig. I did configure it with the initial firmware for the the ethernet interfaces for master ports. Now on last bugfix and current its gone in winbox and webfig. I tried to downgrade to the previous bugfix version but it didn't reappear. The...

I have had multiple kernel failures then reboots on my RB450G, submitted report to my account support. Ticket#2014100466000271, just sent another autosupout. Had to downgrade to 6.19

I don't recommend 6.20 at least for my setup.

Ran

The Problem: The current changes to SSTP are indeed not working with my previous configs with 6.11. I had a ppp profile with all protocol options set to no for MPLS, Use Compression, Use VJ Compression and Use Encryption. For authentication I'm using mschap2 with no certificates. My SSTP client and ...

Got a reply from support change Queue Type from default-small to default for Target Upload, Target Download and Total Queue Type.

It works for both v5 and v6

Randy

Anyone else experiencing this? I sent a email to support but no reply. Updated to 6.4 same thing.

Randy

Sorry for the option number 66 no quotes for the value put quotes

http://wiki.mikrotik.com/wiki/Manual:IP/DHCP_Server

v6 you must quote text '66'

mikrotik simple queues v5.25 v6 differences Simple queues Priority, parent and children v5.25 vs v6.2 and 6.3, bug or just different? v5.25 Target Upload and Download enabled but values for children not needed, set to unlimited, for children to see traffic used for priority v6 Target Upload and Down...

Here is post of mine with a working config

http://forum.mikrotik.com/viewtopic.php?f=2&t=66294

Randy Newman

http://forum.mikrotik.com/viewtopic.php?f=2&t=66294

No scripting needed

Here is a example config that I use for Failover no scripting needed. This is being used in production. Currently it uses Static IPs for GW. You must adjust all gateway= and in-interface= for your config This assumes you don't have any routing or other mangle rules to mark connections and routing ma...

Make sure remote device is using udp for sip. And just basic sip with no encryption or header compression.

Any chance the Internet provider of the remote ext is blocking sip. I have had that problem with some cable providers.

By default some of the newer versions have allow deny set for ext? If so it will only allow regristation of ext for local subnet. Login to FreePBX admin, go to your external ext, there are allow and deny remove them, reload. Make sure you have a good password for the ext.

Ran