We have a problem a CRS326-24-2Q. when we perform a simple reboot from Winbox it stays in the fault state (red) and with the mng light on. If we stop the crs for a few minutes and turn it on again, it works fine.
We have updated the equipment to the latest version 7.4, but the problem persists.

Currently we have 4 CCR1036 as pppoeserver to serve just over 1200 users with a tree mode queuing system. Our problem is that soon we are going to incorporate into our network 1000 Te question es will be better that the pppoe service work on an x86 machine instead of using more CCR1036. We are think...

I have a network of 300 users pppoe divided into 2 areas. The first one is connected to the PPPoE server by ethernet cable and here no problem. The second is interconnected with AIFIBER 5 with a theoretical transfer rate of 300Mbs in both directions. The problem is that when I make a Btest from a Mi...

RouterOS is 6.30.1
there is a queue down with 3 subqueues that apply to different users based on an address list. Any node has a queue type and a queue up with same estrcuture.
The IP asigne by pppo3 is public .

We have a CCR1036 -8G2S that performs the PPPoE server for 800 users and traffic of 150Mbps and a 250Mb peaks . The problem is that when traffic exceeds 200Mb mikrotik puts the processor to 85-90 %. In reviewing the systema profile it indicates that the use of it is due to quees . Then a feeling of ...

I have a router that makes the folowing rule mascarade / ip firewall nat add action = masquerade chain = srcnat src -address = 192.168.1.0 / 24 The problem is that if I look at some connections not made ​​the mascarade I see that I receive requests from the private network 192.168.1.0/24 , as if it ...

I have change and now

status: reseting link...

We have a ZTE MF110 3G modem that detects mikrotik but fails to connect Status Indicates Waiting for packets admin@peque] /system resource usb> pr # DEVICE VENDOR NAME SPEED 0 1:1 Linux 3.3.5 ehci_hcd RB400 EHCI 480 Mbps 1 1:4 ZTE,Incorporated ZTE WCDMA Technolog... 480 Mbps Can we help ??

Thanks
I hve make test with two pc an btest a Works ok

We have a network that generates a nearby traffic at 170 Mbps, the problem is that it seems that routerboard ports are not able to manage above 170Mbps traffic tcp, udp works up to 800 Mbps. We have tested a RB450G and RB1200 direct conection which one attached screenshot. Anyone know what happens ?...

Ther is a field name method on wallgarden -entry and its not working

Whats my error

We need make a temporaly hTTP walled-garden for finish a credit card buy. Problem y the http url is not now

May be a new option like
MAC-Cookie share in the same user-profile from a hotspot

It has a 3-AP network that are currently running behind a Mikrotik 450G header with ROS 6.2 and the mac-Cookie functionality turned on. Hotspot currently runs on a bridge formed by eth2-eth3-eth-4 which connect each of the APS. The system works well because users only need to be validated once. My p...

User is over RADIUS

I am preparing a project for a wifi hotspot that will cover an event where you expect something more than 5000 users. As the AP points idea is to use RB433AH with 3 radios + 3 sector antennas which should of put up about 150 concurrents users. But as header system, perhaps a rb1100AH​​. Thanks for y...

I have the same problem
Have any solution ??

THANKS

I havd try any aoption but ever with the same result ??

Any idea ??

Here is the file.

Thanks

I have make a new test and now i dont now what is happening. There is not any mascarade or nat but the cliente ys login on hotspot with 2 adresses /ip hotspot host> pr Flags: S - static, H - DHCP, D - dynamic, A - authorized, P - bypassed # MAC-ADDRESS ADDRESS TO-ADDRESS SERVER IDLE-TIMEOUT 0 HA 00:...

I have test a Nanostation 5 and not have this problem, Then i think problem is over mascarade cliente on mtk 711. I have tested with a 433 as a client with level 4 licence an i have the same problem...

What device is the 10.5.50.182? Is that the mac and ip of the RB711 interface? YES /interface wireless> pr Flags: X - disabled, R - running 0 R name="wlan1" mtu=1500 mac-address=00:0C:42:05:4F:CC arp=enabled interface-type=Atheros AR5413 mode=station .... /ip address> pr # ADDRESS NETWORK ...

We have a hotspot runing over 433 Al user have a mikrotik rb711 as a client device with a mascarade and authentifi by mac CLIENTE > /ip firewall nat pr chain=srcnat action=masquerade src-address=192.168.2.0/24 Problem is than private ip like 192.168.2.x apear on HOST as dinamic /ip hotspot host> pr ...

I have the same problem ..
dO YoU NOW YET THE Answer

I have a small WIFI network based on a mikortik hotspot with users validated by MAC. The users equipment is mikrotik witha a mascarade. The problem is that the ip of the users appear in the hotspot as AD with the MAC of the WLAN but with the IP of the PCS anf the hotspot make a traslation. The norma...