I have this scenario A1--15km--A2--20km--A3 I m using x86(Dell 2700Mhz 3xPci Slots) Using station wds, ap bridge I have total throughput with 2.51 (using before coming stable ver. of MT 3.x) A1<->A3 TCP-58mbit UDP-64mbit one way. with 3.x-3.28 (For the last 1 year) A1<->A3 TCP-68mbit UDP-74mbit one ...

What is the motherboard where you use this? Are you sure that cables is okay ? I m running my MT on Asus Intel 82801 chipset, like I said I alredy have Realtek - RTL- 8169 Gigabit ether (x4 ports) runing very stable. But I need extra 4x ports and all they have was 44gv - VIA vt6122 ether (they call...

44GV - Via ether vt6122 (4 giga. ports) sometimes lock (1min or after 1h), sometimes start to have lot of time outs is this driver problem or bad via chipset using last MT 3.22 on intel x86 Has anyone have same problem or its just my bad eth. card? Tnx. anyway I already have RTL-8169 Gigabit Etherne...

I have similar problem
http://forum.mikrotik.com/viewtopic.php ... 90&start=0

int3 pls set multi-cpu=no and see if MT reboot

Our MT with multi-cpu=no run stable as a rock :) We use just queuing, some mangle and firewall rules, not using proxy or ppp (Local Ftp server and Video streem) | | | Router------Local | | | Internet From FTP server and Server for Video Stream --> Router---> Local pass high traffic (50% of the time)...

After upgrade from 3.0-->3.20 my router Intel Dual 3.4 Ghz motherboard 82801 Intel chip-set /when multi-cpu=yes every 30-40 min/ reboot itself with multi-cpu=yes I have 26-36% CPU Load with multi-cpu=no I have 40-70% CPU Load Need cpu for lan-speed have Gbit (Rtl Semiconductor x4) ether from my FTP-...

wow fast replay, Tnx.

In my country I can use from 2350Mhz-2500Mhz, 4900-6200Mhz, 902 MHz–928 MHz, 1240 MHz–1300 MHz, I cant use 3.6Mhz and more than 500mw,so normis pls pls tell me how can I use superchanel with L4 licence?
Tnx.

This is so odd...
IF u want Superchanel u must have L6 which is 250$ (It's out of my buget). why??
I dont need unlimited EoIP tunnels or PPPoE tunnels PPTP tunnels or OVPN tunnels
just need license with L4+superchanels

?????
Is it fixed yet, this proxy problem (Error: Gateway Timeout)
so finally I can upgrade
?????

Thx for replay In 3.0 my rooter hangs every 12-30h and I have to do manual reboot, I wrote a letter to support they told me just simple upgrade to 3.7 and it helps now up and running more than 1 week, just it's too dam baggy. What I hate most is, I use MT over a 4 years sins 2.8 and from my experien...

After Upgrade form 3.0 to 3.7 web-proxy don't work do i need some new rules or what This is my curent setup /ip proxy> enabled: yes src-address: 0.0.0.0 port: 3218 parent-proxy: 0.0.0.0 parent-proxy-port: 0 cache-drive: system cache-administrator: "admin" max-cache-size: 28073000KiB cache-...

Do you need to connect from Public network (Internet) to these local IPs ?

Yes i did this but when I enable web proxy Router IP address will be shown, you are right sergejs about (router as a proxy) is there a any way to fix this

Ok I yesterday I recive Public ip's and by http://www.mikrotik.com/docs/ros/2.9/ip/nat I did it but I have anader problem when I enable web proxy when I do http://www.whatismyip.com/ it gives IP of router not IP assinged to client i m not a expert there is something with nat rule if some one had sam...

I have 32 public IP I want to link same public to local 3-4 IP's like this This is 1 of my 32 public IP's /ip address add address=10.20.0.101/32 interface=Public /ip firewall nat add chain=dstnat dst-address=10.20.0.101 action=dst-nat \ to-addresses=192.168.0.41 /ip firewall nat add chain=srcnat src...

ip firewall mangle> print Flags: X - disabled, I - invalid, D - dynamic 0 ;;; P2P chain=forward in-interface=wlan p2p=all-p2p action=mark-connection new-connection-mark=p2p_conn passthrough=yes 1 chain=forward connection-mark=p2p_conn p2p=all-p2p action=mark-packet new-packet-mark=p2p passthrough=ye...

Gess u'r AP is in client bridge mode and all 15 users connected with UTP to this AP(is it wrt)?

I have done same thing no problems at all:)

if u AP can do WDS than it will act something like swich and u will see all pc's MAC i arp list

Done some testing I find that all thing was about using transparent proxy It's goes like that Only one pc connected to MT and limit to 128/256 USING FLASHGAT first transparent proxy on , dstnat enabled when I download file TRAFIK goes like that 1s 600kbps, 2s 2kbps, 3s 3kbps, 4s 400kbps, 5s 230kbps,...

Have same problem:(
Have someone find solution for this

for single IP add. ip firewall filter> chain=forward src-address=192.168.1.10 protocol=tcp connection-limit=30,32 action=reject reject-with=icmp-network-unreachable and this for all IP's ip firewall filter> chain=forward protocol=tcp connection-limit=30,32 action=reject reject-with=icmp-network-unre...

Ok I get the point, I need 2 MT for that looking from hire http://forum.mikrotik.com/viewtopic.php?t=3954&highlight=settings+running+hotspot this is the setup and pls corect me if I m wrong (never tryed) -----------GW MT Router IP:192.168.1.1 / ip firewall dst-nat chain=dstnat in-interface=wlan ...

Can I cash files 4-5 mb like avi,wmv,zip,exe...? Hi all This is my first post This is my setup ip firewall nat> print Flags: X - disabled, I - invalid, D - dynamic 0 chain=srcnat out-interface=internet action=masquerade 1 chain=dstnat in-interface=wlan dst-address=!192.168.1.1 protocol=tcp dst-port=...