[flash=][/flash] No man... Netelastic and juniper is working on single box... And i allready mention about power consumption... My only request is i need a one box in a mikrotik .. Because of winbox funtion its very fast to configure any type of router... And i need one box because i need to put tha...

Thanks for the great reply... I hope in new upgrades mikrotik achieve this on single bng router... Because in these days we like to put the smallest equipment into the rack because of lower consume voltage and ups backup will be good.. Nobody will like to install the big servers like dell and hp ser...

i think you need to split that load on separate machines that ccr1036 is maxed out I tried x86_64bit version on xeon server also... Mikrotik is not passing traffic as much in that also... Mikrotik needs allot of resources for passing the data... More speed need more processors...i heard about netel...

I have ccr1036 2s+ em .. My information and configuration details.. I am running a small isp in a town area.. My total customers are 2100 only. And every user has different bandwidth limit from radius server configured as zal pro for assigning internet packages with expiry date..like 10mbps 15mbps 2...

hi i need to block certain clients after some bad password attempts and blocking time will be 10 min.. how can i do that in mikrotik using bridge and firewall... i am doing this but its not time level. /interface bridge filter add action=drop chain=input disabled=no mac-protocol=pppoe-discovery src-...

i need help to resolve this issue.

HI, I HAVE A 500 MB INTERNET PACKAGE.. BUT THE PROCESSOR OF THE RB750G IT GOES TO 100 PERCENT SO I CANT USE MY 500 MB INTERNET ALL THE TIME.. MY MONEY IS WASTING KINDLY HELP ME FAST AS POSSIBLE AND I ALSO REQUEST TO THE MIKROTIK SUPPORT TO HELP ME.. I STARTED USING RB750G FROM 2 MONTHS AND 1ST MONTH...

rb750 series is a low memory router cannot store many files. so kindly u have to uncheck the accounting fron ppp secretes or from radius and accounting is also eating a lot of processor.

open terminal type tool user manager customer print and there u will see the right username and password of your user manager. i've the same problem ... previously ive RB750 with RouterOS v4 inside, now i just brought new rb RB450G (RI450G-A0) with RouterOS v6 , now updated into v.6.33.1, but still ...

i tried this and i made it. but sometimes its not giving the gateway address. sometimes sending a bed subnet
i am getting mad.

0x160A6508000A71880100A718801 its not accepting by mikrotik which is i created. so kindly someone please make
a working hex code for me please.

hi i need a complete hex code of my network kindly someone please help me to resolve it

my network is 10.113.138.188/21
gateway= 10.113.136.1

route address is 10.101.8.0/22
gateway= 10.113.136.1
so kindly let me know the hex code into code option 121 please.


thanks in advance

ieb4736_3.gif i need a loop guard protection in mikrotik or spaning tree protocol.... like 4 uplinks of different areas 1= garden 2=office 3=cafeteria 4=wireless mesh wds so now i need just a security for my internal servers and for my other areas prevent disconnectivity by looping area. one of my ...

i make a pppoe server with single internet remote ips given me my customers routers remote...its working but when i give the two internet from behind the server i make another internet bandwidth server with three internet different different isp's and i make a pcc server...then giving the whole inte...

post your full configuration and errors here and screenshots if u can.

i found the solution the solution is just make a read only customer and then give him user prefix for example username starts from telstra-101 customer telstra so the telstra will be the user prefix now make another customer with name of digital so now give him the user prefix digital so now in tha...

its a dns problem... use this 8.8.8.8
8.8.4.4
ip dhcp-server network add address=Lan/24 gateway=gateway netmask=24
dns-server=8.8.8.8,8.8.4.4

tombee79 please kindly explain without bridge interface such as for e.g hotspot setup on interface ether1 192.168.2.2 hotspot setup on interface ether 2 192.168.3.3 then radius add 192.168.2.2 shared 1234 then radius add 192.168.3.3 shared 1233 ???? please explain i really need to make the multi sub...

if ur user manager page will not display simply change wwwport from ip services. then open your.router.com:81/userman

i am still waiting for help and checking my post reply daily. please kindly anybody help.
i know i 5.7 i can make subscribers with parent profile and every thing but i need in RouterOs 3.30 because its easy to use for me.

Dear Sir. i have my small broadband service in karachi and i make the server of mikrotik 3.30 level 6 license and i created the hotspot profile. its working fine and userman is also working good but i make another subscriber to make another user manager owner but i can't connect my 2nd userman owner...

I am using new user manager 3.30 I am trying to use 2 subscribers for the same router and on the same hotspot. one subscriber is with the name of fbi 2nd subscriber name is ncn i want to do just put the users in different subscribers my users starting username is fbi-100 and i am the administrator o...

yeah my both problems are fixed thanks allot. scanning and internal using dsl problem is fixed. u said for scanning but the dsl is working also on manual ip method hotspot is not asking password on different ip pool which is used by local internet hotspot lan but the dsl ip strange then the hotspot ...

i remove the pools this is the new configuration please check again and let me know the mistake again please. [TELSTRA@Telstra Broadband] > ip hotspot export # aug/30/2011 04:25:57 by RouterOS 5.6 # software id = xxxx-xxxx # /ip hotspot profile set default dns-name="" hotspot-address=0.0.0...

ip hotspot export # aug/29/2011 23:48:18 by RouterOS 5.6 # software id = PRDI-MC0Y # /ip hotspot profile set default dns-name="" hotspot-address=0.0.0.0 html-directory=hotspot \ http-cookie-lifetime=3d http-proxy=0.0.0.0:0 login-by=cookie,http-chap \ name=default rate-limit="" sm...

ok i got u but kindly please tell me about scanning ips because of mikrotik my netscan shows dead host with RB750 ether mac address. kindly Solution please.

simply when ever u make the hotspot setup file sharing is just simple u can share your documents and printers but the problem is u have to log in hotspot 1st and your client also to share the documents and download them. Suppose you are sharing a printer or any document file with your client or to a...

Please Kinldy help me out i cant use my manual ip on this network hotspot is asking username and password and then my internet is working on mikrotik hotspot instead of my adsl modem.i really need to use my adsl modem services in my private use and stop this scan issue. please kindly guide the solut...

===== DSl Modem 1===================DSL Modem 2====== 192.168.0.1 192.168.1.1 | | | | Lan= 172.16.1.1/24 [TELSTRA@Telstra Broadband] > ip address print detail Flags: X - disabled, I - invalid, D - dynamic 0 address=172.16.1.1/24 network=172.16.1.0 interface=Lan actual-interface=Lan 1 address=192.168...

i just remove the ip pool but problem still not solved. So kindly tell me in easy method. please.

Dear Sir, I am using RB750 and i make the hotspot but the problem is when i start ip scanner or scan ip's from netscan its shows me the alive ip's with the Router Board's Interface Mac Address on every IP. Second thing is my Lan Interface having 172.16.1.1/24 and wan interface ip having ip 192.168.1...