hey guys so i got 2 networks thats connected through wireless Site 1: CCR103612G4S 192.168.1.0/24 ETH3: 10.10.10.2/24 Site 2: 750UP 192.168.101.0/24 eth3: 10.10.10.3/24 the configuration for the first site is these # jan/02/1970 00:51:50 by RouterOS 6.30.1 # software id = B9UA-X3ZT # /interface brid...

Hey guys i got 2 network that got there own range and work thrugh DIA Network 1 : 10.10.1.1/24 Network 2: 192.168.1.1/24 both got Cisco as main router which connect them to the P2P DIA so now i installed a wireless connection betwen them with wireless device and the network working and i wannt to co...

hey guys so lets say i got a program that uses UDP port 32233 and and a mikrotik which got Hotspot on it how i can bypass the udp port from the hotspot or the servlet and is there any chance that i can bypass all the udp ports from the hotspot and only handle port 80 tcp through the hotspot :D

hello guys i have a network thats include Mikrotik Cisco router Avaya the thing is when i setup mikrotik normally with 3 wan loadBalnce every thing works fine with the VOIP and H323 but when i setup Hot spot i get one way voice so i worked around it by letting the Cisco giving the DHCP for the netwo...

hello guys i got a 1036 board on my network when i setup the board with normail dhcp server and 2 wans every thing works fine and my avaya system that use h323 works fine the problem start when i setup hotspot every thing start to hid down the road with my avaya system sometime the voice goes 2 ways...

forgot the mention that there is a switch betwen the mikrotik and the voip

these switch is manged L2 and its interface working with MSTP protocol

don't know if it's what cosing the probelm

anther thing i add half the phones on the ip bind to bypass the hotspot

hello guys so my network gose like these 3 WAN loadbalnced on mikrotik running hotspot and every thing working fine the DHCP for hotspot is 192.168.4.1/16 and on the same switchs we got avaya ip system that gose with these ip range 172.1.1.1/16 the problem is when mikrotik start working in the netwo...

i done the same as in the wiki but i get connected with no problems


and i get ip from the server

and the arp proxy is active

but no data

no ping between the clients

can;t share files nothing i can do relley

hello guys so i got 4 offices which i want to connect with vpn 1 main server that got the DHCP server and all of that and the reset just conect the networks to the main mikrotik tryed L2tp and pptp all the time i connect fine to the main router thu nothing more then the connection no ip no ping to t...

hello guys so we got 3 offices the HQ got 5 DSL lines with static ip and we got office 2 and officer 3 both with fiber connection i wannt to bridge the 3 offices over vpn and i wannt to know what the best knowing that we got a data serer in the network and we got Voip server Avaya so i connect them ...

hello guys so i got a mikrotik installed in my network and there is a DIA on it with a public ip and every thing works fine so what i done is i assigned the public ip to my pbx server and its working fine and i can conect throw the pbx server from any where thro sip trunk my problem is all the time ...

hello i need someone to program me an API or program that can integrate Opera PMS with mikrotik both ways and dont tell me to try raidator cose i dont wannt to deal with that program relley any one who can help replay on the forum and im reddy to pay for who ever can do that public or privte i dont ...

hey guys so i got RB CCR-1036 and i got a link from my ISP with 100 Mgb what i wannt to do is spilt the speed on 3 vlans like Vlan 1 30meg Vlan 2 40 meg Vlan 3 30 meg and on each vlans there will a defrent hotspot with ather queues for each user in each Vlan so how can i spilt the speed from the sta...

found that its an on going problem with mikrotik actually

http://forum.mikrotik.com/viewtopic.php?f=14&t=32935

actuly i found the problem i went with the static ip configration when i put the ip like these 62.1.1.1/31 on the subnet 31 it don't work @ all i can ping the getway my isp can ping my ip but no internet but when my isp change it to 62.1.1.1/30 it works fine with the same config on the main post i d...

hello guys so i got DIA from one of the ISP's around here and they got the cercet to my location and every thing fine so they toled me to configure my static ip as point to point ip wich mean 192.168.1.1 <--- my ip 192.168.1.2 <---- Getway so i add the ip's to the address from ip like these 192.168....

forgot to say that the ip binding is only on the main network the remotes works fine without any need for ip bind with macs

hello guys so i got 3 mikrotik boards installed in my networks we installed one as main and the athers as Remote Made all the configration oky so the remote can conect to the main board over pptp with no problems and made the network as EoIP tunnels on the 3 boareds the Ip range for my networks is 1...

hello guys i'm a bigner in these kind of things on mikrotik so i got actuly 3 offices in 3 citys all off them got internet + static ip + all off them got mikrotik in the network so what i wannt help in what is the best way to bridge the networks ( MPLS - VPLS - EOIP etc) and how i can do that , lik...

thx for the replay

i know u can do that

but my question was

can u load share 4 links

4 DSL lines - 4 fiber links on one board witch u can do with 2 now but can u do it with 4 links ?!

at the same time on the same board

hello guy's sorry about my slacking english :P oky so what i wannted to talk about is loadsharing wans over 2 wans as some knows u can loadshere 2 wans on any mikrotik boards easy without any problems /ip address add address=192.168.1.100/24 broadcast=192.168.1.255 comment="" disabled=no i...

hello so let me tell u what i wannt i got a mikrotik board 493 and a Cisco router i wannt to give only one ip out from the mikrotik and that ip gose to the cisco guy :D can i do that without puting dhcp server or can do a dhcp server and assigne the ip by the mac address for the cisco Second how i c...

hello so im gona explain my network so u understand what im asking for i got a board and the board got 2 links in it and my network is IP based not usermanger nor user profiles what i wannt is to limit any kind of upload in the network for every IP by for example 20kb and the limit is for every on t...

got the same probelm and my os ver is 4.16

dont know what to do as i need to modfey every thing menuly all the time when a custmer compline about his cridtes went off without using all off them

hey guys im kinda new @ mikrotik world so i got a new borad and i intalled 2 DSL line perfectly on it and working fine and every thing my problem is if someone started to use IDM he pulls all the line bandwith to him wich make alot of trubles to the reset on the network so i wannt to know if there i...