Is now Sept 2024 and I have Dude version 6.49.14 on a RB450Gx4 and have the same issue of the logs filling up 27 lines in a minute in my monitored other Mikrotik devices. As a fix work around what I notice is that I can disable in the Dude the "Router OS" by removing the check/tick per dev...

Since version OS 6.47 Mikrotik has added a software option to be able to disable the hardware button > system routerboard reset-button set enabled=no (or yes). Typical Mikrotik WiKi documentation does not clearly state what exactly yes and no mean, so maybe assume that No means one cannot reset the ...

I use the Huawei BBU15-D-T on an OmniTik5 without any PoEout being used but eth1 and eth2 are connected to another Mikrotik, have 20 units of the Huawei BBU15-D-T and 5 of them have started flashing the red fault light and then non operational, replacing the batteries does not help, if anybody has t...

Also, confirm your OSFP hello-timer just to triple check it's still at the default of 10s. An alternative is to use a GRE tunnel which would traverse the radio link without any fear of multicast packet being molested or lost and allow multicast to work properly. Still it may be far simpler to chang...

Same goes for me with various 24vdc power adapters that are supplied for SXTsq5ac rounded shaped 24vdc power adapters, hAPac2 rectangle shaped adapters, and for the LHGXLHP5 and RB2011. About 50% of the failures are due to bulging caps capacitors which typically fail after about 6 months or more and...

I am having exact same issue of not always getting a lease from ISP provider or that it takes too long causing a couple of minutes break or in worst case sometimes a half hour break, this after my ISP changed their modem for a different type, being a Genexis router/modem from Kablenoord Netherlands....

You could have waited a few more years before asking... I no longer use WinBox2 2.2.18. 3.39 is better and have all previous problem fixed. The old feature (which one can say is not a problem to be fixed but considered as a downgrade?) is not in the new WinBox3.39 which for me is the biggest issue ...

However, I still would love that Mikrotik would bring the old feature back where Winbox open windows would remain displayed on the screen if ones connectivity fails to the routerboard!! Maybe by putting a check option on the first main login screen somewhere. doesn't autosave session accomplish thi...

Hello rextended, I would love to know how you got Winbox2 working on Windows10? Maybe you had not tried to do a reboot? as then you will notice that one cannot click the responding Ok button you get with the reboot menu, it does nothing. Also error messages that come up with an Ok button also not cl...

Hi there Imi, I use exactly this Huawei BBU15-D-T with its 4x 1.2vdc Nickel Lithuim easily replaceable click in cells for the Mikroitk hAPac2 with both radio WiFi's enabled, 5 ethernet ports in use and works great! Lasts about 4 hours or so but don't quote me on the 4 hours, could be a bit more from...

I have the same issue that I notice that suddenly for 30 to 60 seconds I will loose complete connectivity to a remote Mikrotik device which is in the exact same network as my Dude system, this is not via an internet provider internet line. I can still login with Winbox to the connected neigbouring M...

I have had the same problem with these AirFiberX devices too. The UBNT AF5X have an issue with both their ethernet ports, all socket RJ45 golden pins normally have a slight concave shape so that it sits nicely contacting the RJ45 male plug gold contacts, but in the AF5X AirFiber5X they are bent 180 ...

The UBNT AF5X have an issue with both their ethernet ports, all socket RJ45 golden pins normally have a slight concave shape so that it sits nicely contacting the RJ45 male plug gold contacts, but in the AF5X AirFiber5X they are bent 180 degrees the wrong way therefore the only place of contact is o...

Good way is to keep an eye on this rain fade issue, I would suggest implementing some sort of Smokeping throughout your network to compliment the Dude as such, a program such as MultiPing.com for Windows PC is very cheap and has a great graphical representation and a weeks historical data you can ch...

Hi guys, I do not have customer complaints of slow internet (100's of clients) due to one device downloading and hogging all allowed speed limit. This as I use Mikrotik version 6.x customer client router with a combination QOS via Mangle for VoIP and total Queue queueing that dynamically per millise...

I have this issue that the wlan1 interface disappears when I put too much text into the interface comments fields, see attached supout file (typically I put my wireless scan results in the comments fields and occasionally get big enough to cause this issue). This issue is reproducible by pasting in ...

Hi, I am looking for IoT products LoRa sensor devices in the 867 to 868Mhz. I see the TG-BT5-IN and TG-BT5-OUT listed on your IoT products website but guess these are not 867 to 868Mhz. Do you have any such 867 to 868Mhz loT sensor devices, or are they in the pipe line planning (future)? D.Beckmann ...

Winbox V2 does indeed still work with the latest 6.x OS. The issue "Missing RouterOS WinBox plugins" is a known issue when using a MAC address to connect, repeat a few times and will adventurously get the plugin and or use the IP address instead which works first time. In any case I have f...

Question Mikrotik, Is this limit of 60 to 80 user still valid as of Feb 2021? And maybe if you could mention a reason as to what issue occurs when one does try hundreds of L2TP server sessions in a Mikrotik? I can imagine some users business expands over time and this limit gets overlooked until thi...

What I miss here in these Mikrotik comments about 802.11 being faster on a point-to-point link is the any mention of distance. So for sure any distance under 1km then 802.11 is faster, but when getting into longer 10km links then you may be better trying nv2, as I suspect because 802.11 is not built...

To go back and re-login (reconnect) to my saved session and view immediately on opening the windows I had open is not what I am after, but rather that I do not loose the windows tabs that I had open in the first place and can still see in the disconnected session, which is what Winbox2 successfully ...

I use Winbox daily and I have this issue where I cannot use my Windows10 laptop with Winbox version2 as the one cannot accept the Reboot Ok button. The main issue is that if I am working in a Winbox3 session and I loose connectivity then Winbox3 no longer displays the settings I had in the Winbox wi...

This info I got from Mikrotik Support should clear it all up. LHG XL 52 ac LHGXL52ac antenna dual band has 5dB less receive power than other 27dBi LHG antenna (designed like this!) I purchased beginning 2020 a total of 4 of these LHGXL52ac antenna hoping to build a stable 20km (12.5miles) point-to-p...

I have version Dude arm 6.46.1 on a RB450Gx4 with same issue that the alarm shows in the Dude Network Maps location as red, device down, but in the Services and then TAB Outages section the alarm simply does not show at all. Typically when the alarm clears it may then well show up as a resolved hist...

nstreme and nv2 tend to work better for more than 1km (0.6 miles). So under 1km you should try to use 802.11 and the with the Wireless Distance indoor setting, not the dynamic then, all be it with 802.11 the distance setting on dynamic seems not to make much difference under 1km. Guess under 1km (0....

Does anyone else have this experience? I have just bought 5 of these Sept 2019 released antenna's LHGXL52ac that have a max 30dBm Tx radio power with a 24vdc factory supplied adapter. Has anyone experience with the unit not being able to reach the full output as I have a link where one direction has...

There are 2 ways to achieve fail-over, Mikrotik has setup the simplest method in their LHGXL52ac factory default configuration, that is then RSTP (STP tab) which is a system that toggles (switches) itself between available interfaces in its bridge. So the RSTP is designed to stop looping, the RSTP i...

Why not to use ap-bridge to ap-bridge means full WDS? To make a comment as to why to use Station WDS mode at one end and AP bridge at the other as opposed to the old way configuring corresponding radios on each RB to ap-bridge, dynamic WDS (ap-bridge to ap-bridge means full WDS, which can be somewh...

To come back to the need for Giga ethernet interfaces: What most people do not realise is that telephony requires a very low ping response time so as to prevent echo on a call. This can be achieved by having giga ethernet interfaces, as every step in the link helps, and helps a lot. (25 years teleph...