On page by link, that you've provided is written, that you have to block untrusted hosts (I assume, that every host from WAN port) on UDP 5351 port.

Good idea, thanks

Hello! I have few questions regarding to Groove A 52HPn routerboard: 1: What type of radiation pattern built-in antenna have (is it unidirecional)? 2: I want to connect this antenna to internet, and configure hotspot on it, to allow visiting only one site. Can i do it via Hotspot (does license Level...

Hello, I have problem with physical interface matching. I have router with 5 physical ports (located on router). Problem is that router was disconnected from all cables. All our cables are marked (e.g. Internet, Office, Public, e.t.c.) with stickers, but interfaces on router was renamed, and now I c...

Hello, I've tried to make second gateway on mikrotik, and i've got some questions about it. My configuration: wan1 (main): PPPoE connection via ethernet, real static IP wan2 (backup): adsl link via modem (dynamic IP, modem works as router, so mikrotik gots virtual IP) questions: 1) if i do 2 routes ...

now I see, that there's also no 'routerboard' section in 'system' menu. what am i doing wrong?

Hello, I've updated firmware on router to version 4.17 (from 4.11) to use new usermanager, now i can't see profiler under 'tools' menu, and also router became unstable - it kicks me off winbox every 15-30 seconds. Mostly it's user for hotspot, we have transition to new user manager system (before th...

I have just set up Mikrotik HotSpot, and want to make limitation for example, 1h for one user, and want to allow him to use 2 devices. If user will use both devices at same time, will time be divided or summed (will it work for 1h or 30min each)?

p.s. I have mikrotik v 4.11 installed.

Have a look at these.

http://wiki.mikrotik.com/wiki/Manual:PCC
http://wiki.mikrotik.com/wiki/Two_gateways_failover

Thanks in advice, used solution "2 gateways failover", it fits better then PCC. Works good.

Hello, I have Mikrotik router (RB750), and 2 internet connections, I want to make router to balance load, or, if it's hard - simply switch WAN from first to second automatically (second one is very slow, but quite stable). The first connection is PPPoE connection, and there can be many types of fail...