Have a small bug. On my CCR1009, when I right click Interfaces --> Interface --> any interface --> Detail Mode in winbox3.41 just closed.
https://imgur.com/a/Ompf5pA

Wish to see home wifi router come with 1st port 2.5Gb and active poe.

On both of my RBD53iG-5HacD2HnD health missing "cpu-temperature" is this normal?

Will there be a Marvell Armada 8040 Mikrotik?

There is no statistic in all CAP interface on CCR1009-8G-1S-1S+.

Will the SFP+ 3m direct attach cable S+DA0003 works with Intel X520-DA1 0GbE Ethernet Converged Network Adapter?

Hi the export file seen wrong on my CCR1009. ver 6.34.2 /interface ethernet set [ find default-name=ether5 ] l2mtu=1588 name=ether1-gateway set [ find default-name=ether6 ] l2mtu=1588 name=ether2-master-local speed=\ 1Gbps set [ find default-name=ether7 ] l2mtu=1588 master-port=ether2-master-local \...

@sergejs....it seem the problem still exist...when login to CCR1009 via winbox or web, the graph will plot out correctly.

@sergejs... Sorry for the trouble the problem seem to have fix after it's cross over to 0000hrs. It's started from the last 6.33RCXX dated 27 Jan2016.

The scale of the graph seem to be off for my CCR1009.

Hi there, I would like to get some expert advise to configure the following device. RB2011UiAS-2HnD-IN - 192.168.88.0/23 ---> 911 Lite5 192.168.88.160/32 Can the 911 Lite5 configure in such a way that it manage it own client but still remain within the same subnet of RB2011UiAS-2HnD-IN ? Many thanks

Can't assign IP address greater than X.X.X.254.

I have place order from here.

https://store.alagasnetwork.sg/wired/mt ... 1s-1s.html

Just place an order for Cloud Core Router 1009-8G-1S-1S+. 699SGD. Will arrive in 1st week of May 2014.

1Gb/sec NAT is it possible for 1009?

My supplier stop replying after ask for the price of both models for end-user.

Can the CCR 1009 10Gbit SFP+ port accept a standard SFP module?
Do CCR 1009 has NAT acceleration?

Do CCR 1009 have hardware switch chip ?

In the 6.9 release, there is a "updated bootloader firmware". But I didn't see any new version then the current 3.10.

Possible date will be end of march in Singapore after equipment has been certified by IDA.

Backup yr current setup and try this. 1 ) Use Winbox to access the RB750G. 2 ) New Terminal 3 ) Issue this to reset to factory setting /system reset-configuration no-defaults=yes 4 ) Remove the DHCP-Client setting. 5 ) After reboot, use Winbox to access the RB750G and paste the below setting. /ip ad...

For reference, mine look like this. To solve issue, post the output of "/ip address print detail", "/ip route print detail", "/interface print", "/ip firewall export". So that others can help u. /interface pppoe-client add ac-name="" add-default-rout...

You read this. http://wiki.mikrotik.com/wiki/How_to_Co ... _xDSL_Line

Disable some module and no more error. jan/01/2002 09:00:00 system,info disabled userman-test-4.17 jan/01/2002 09:00:01 system,info disabled ups-4.17 jan/01/2002 09:00:01 system,info disabled gps-4.17 jan/01/2002 09:00:01 system,info disabled calea-4.17 jan/01/2002 09:00:01 system,info router reboot...

Hi everyone... After the upgrade I have a message in red as shown below. I was wondering what wrong. jan/01/2002 09:00:02 manager,error,info,debug error: I have also see some new package and was wonder if those were required. Thanks, Chris. [admin@MikroTik] > /system package print Flags: X - disable...