No, I reconfigured all my network. I don't know the solution, sorry!

The problem is just communications between Cisco and RB450G. In the Cisco we have configurate VLAN 20, but I don't know how tag the packets to the Cisco. Please, tell me if I'm right about tag and untag traffic in Mikrotik: Traffic go from R1 to R2: - R1: To tag it's neccesary make a bridge with the...

I send you my example with two SSID in two VLAN:
http://forum.mikrotik.com/viewtopic.php?f=7&t=57043

With ethernet interface the same that with wifi interface.

I hote this helps.

If I think Ok about tag and untag traffic in Mikrotik: Traffic go from R1 to R2: - R1: To tag it's neccesary make a bridge with the vlan (create in wan or trunk port) and the port where come the traffic that we want tag. In the vlan create IP Adrress of vlan - R2: To untag only need create a vlan in...

Hello everybody, I attached a picture with my network configuration. My LAN network (wifi), with any hotspot, work ok with any default route without VLAN. Now i'm trying to configure one connection to a router cisco through VLAN. I don't get stablish connection with 192.168.20.1 (IP of cisco) /ip ad...

Do not let me it. It`s the problem!

Good Afternoon, I have a doubt with the new device: RB750UP Can I include ether1 in Switch1 with the rest of ethers? If we do bridge between ether1 and the rest of ports we cannot reconnect via winbox. The following message appears:"Could not connect to XX:XX:XX:XX:XX:XX (port 20561) - time out...

Thank you very much both of you, It's work now. But I have another question: ¿can I put a Mikrotik interface as a trunk ? I have only a default route, and the traffic only can go through a vlan. "/ip route add comment="" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=\ 10.250.0....

Hi everyone, I have a Mikrotik RB450G as a gateway and two Mikrotiks RB411AR as a Access point. Ether1 of Mikrotik RB450G is connected to internet access and Ether2 to switch / level2. We have connected two APs to the switch as a picture. We want that appear different hotspot per antenna, but these ...

Hello Marc,

I have the same problem. We have 2 dudes servers, one with 50 agents and other with 35 agents. In one of them server lost connections server-agent and not recover, but in another server lost connections but recover (correct operation). It's very strange


Marce

I have the same problem with a server and approximately 80 agents. It´s very strange because It has worked well for months and suddenly It fail. The dude lost the connections with some agents and don´t have reconnect. I use the version 3.6 and I have sufficient bandwidth. Could you make it work well...