Hi I currently have a mikrotik 433 acting as a PPPOE server issuing IP addresses to the wireless clients in the 10.0.0.0 range. The clients have internet access once the pppoe connection is established. The mikrotik pppoe server has an IP of 10.0.0.254, however the wireless interface has an ip of 19...

Hi

When i run a torch on one of my pppoe clients, i am noticing alot of UDP src port 80 connections.
Should i be concerned about this?

Sometimes there are as many as 50.

tombrdfrd66 Did this solution also work for you? I have just made the changes, but am anxious to know.

Any news on this topic? I have the same issue and have been following.

Would appreciate any feedback.

Thanks for the reply.

How can i correct this issue?
What is fresnal issues?

-Setup-

RB411 Station Version 4.10

Rb433 AP Bridge Version 4.11

Distance is about 800m

I also have another RB433 AP mounted on the same pole as the station, but set at a different frequency.

RB411 Station Version 4.10

Rb433 AP Bridge Version 4.11

Distance is about 800m

I also have another RB433 AP mounted on the same pole as the station, but set at a different frequency.

Please help

Hi Guys

Have you found a solution to this problem?
It appears i am having the same issue. I have a RB411 Station connecting to an AP Bridge 600m away.
I also have another RB433 AP connected to the same pole.

The errors you were getting are the exact same.

So frustrating, please assist.

Does anybody have a solution to this problem? I have the exact same problem.

Did you ever manage to solve this issue? I am having the same problem

Hi I have a 2.4GHz AP Bridge using a sector and a 2.4GHz Station also using a sector. They are about 1KM away from each other. I have a signal strength of between -91 and -97. Now i know this is not good. The 2 problems i have are: * The connection keeps dropping and saying extensive data loss. * I ...

Hi Please help. We have a station setup using an RB433 with a 5GHz Grid antenna that needs to connect to a RB433 with 5Ghz Grid AP. It scans the network and has a signal strength of -77. We cannot connect to the AP. it just says searching for network. All configurations are correct. Has anybody else...

Our client would like to setup his network wirelessly and wants to be able to use sipp phone's anywhere on site.
If we were to setup RB433 boards and use dip pole antenna's. When a user is on a call will the call drop when handover between 2 antenna's occur, if the correct configurations are in place?

sent

Managed to update to 4.17 -- Problem still persists.

When uploading the update, it stays on 0b of 11.9MiB uploaded, then get disconnected.

So it seems that traffic through the LAN port is causing the issue here. I will try upload via the RB433 link and get back to you.

Thanks.
I will upgrade and let you know.

Whats the best way to upgrade?

Sorry i am a newbie at this

Thanks

We are using OS 4.11 It is a basic setup. RB800 setup as AP Bridge. 2 RB433 boards set to bridge connecting to RB800. The wireless link from both RB433 is stable 100%. However it's just the ethernet port on the RB800 that seems problematic. When I ping a pc on each of the RB433 networks and ping the...

Hi - I am having a problem with one of our RB800 boards. It is the second board to present the same problem. We have 2 sites connecting to the RB800. It seems as if the ethernet port on the RB800 periodically times out, causing our VOIP phones to disconnect. When no sites are connected the ethernet ...