If anyone needs that script to update /routing rip networks with pppoe gateway: :global pppoegateway; #change these values accordingly: :local pinterface "pppoe-OgeroFiber" :local subnetogero "192.168.0.0/24" #No more changes :log info "Fetching Ogero Gateway" :local cu...

now that is the best reply I ever got on any forum! thanks a bunch!!!! Do i have to do the RIP rules? I live quite far away from that ISP and only had the situation proxied by @rabienz and @Najifares. So from what I got that way, you have to advertise those IPs to ISP's equipment using RIP so that i...

I am talking about the same ISP with the same config and same lack of explanation they give lol Do i have to do the RIP rules? I just wanna map different ports on different public ips to some servers on the LAN side but how do I configure the public IP /29 range I'm assigned if I'm getting a differe...

Hello Sindy Sorry to hijack the post Can you provide a config where all 5 public addresses are to be used to NAT to different private address subnets on LAN Thank you so much! If I don't know the starting point, I cannot give you a step-by-step guide. Press the [terminal] button in WebFig or Winbox ...

https://forum.mikrotik.com/viewtopic.php?f=7&t=121104 Upgrade your base station radio and antenna, it's cheap considering the clients number. Always use the best radio and antenna. I used only netmetal+19dbi sector or now is best to use mANTBox 19s. I have 24 wireless clients and over 50 conect...

BUMP!

Sorry to revive an old thread
I'm having the same problem any idea how to solve it?

I'm trying to setup the following: Switch 1 (ip 192.168.98.254) is a RB260GS connected to a SXT5ac on port1, port 2, 3 and 4 are untagged traffic that we want to separate SXT5ac has an ip on vlan id 1 Switch 2 (ip 192.168.98.253) is a RB260GS connected to a SXT5ac (linked to the first one) on port 1...

/ interface pppoe-client { :global ExternalIP :local clientip :local clientstatus :while (1 < 2) do={ monitor pppoe2211 once do={:set clientip $"remote-address"; :set clientstatus $status} :if ($clientstatus="connected" and $ExternalIP!=$clientip) do={ :delay 1 :log info "So...

I am using load balancing; I have 1 pppoe with fixed ip the other is dynamic
I created two static routes, I enable one and disable the other manually now when the external ip changes (every other day)

Thanks for your help!!

bump

I'm new to scripting so if anyone could help me I would be very grateful I am trying to accomplish the following: run a script that checks if the ip on a pppoe interface changed if it's the same, nothing to be done if it is, check the network ip (the gateway) for example if the ip is 93.123.130.155 ...

Can you please post the rules used? That would be great I see a LOT of SIP scanning activity now days on public IP ranges. One trick we do is pickup any IPs trying to connect to things they shouldnt (like core routers) on port 5060 or 5061 and add them to a banned list for a minimun of 12 hours. If ...

Hey everyone,

I noticed a problem in 6rc7 that was also present in 5.12 and was fixed in 5.13:

arp reply-only doesn't work for bridges (the problem was also present in 6rc6)

I'm on RB1100AHx2

Anyone else has this problem?