MikroTik

rahulmkhj

Can anybody please confirm if the “Mikrotik” iPhone app is available on Mac App Store? Or have they opted-out of it?

rahulmkhj

Update

I've tested on one CRS317 I have. The rule works perfectly fine. Bandwidth for that particular VLAN was limited to the rate defined in rule. But that 317 has ROS 6.46 vs 6.46.3 on this CRS309.

I'm not sure yet, if the issue is with 309 OR ROS-6.46.3 OR a combination of these two.

rahulmkhj

i think currently CRS3xx cannot do that kind of discrimination by VLAN i only had tested global shapping per port in switch --> port settings ingress egress The wiki says it supports VLAN as well as MAC based traffic shaping: https://wiki.mikrotik.com/wiki/Manual:CRS3xx_series_switches#Traffic_Shap...

rahulmkhj

Hey Mates, I've a CRS309 (ver. 6.46.3), and trying to limit b/w on per VLAN bases using switch rules as described here: https://wiki.mikrotik.com/wiki/Manual:CRS3xx_series_switches#Traffic_Shaping . But somehow these rules do not seem to have any effect in terms of traffic shaping. Following is my r...

rahulmkhj

Since we're already in 2019, I assume this feature will be available only with RouterOS 7.

.. but nobody can tell when RouterOS 7 will be available ..

rahulmkhj

So this doesn't have anything to do with PoE unless I'm missing something. Have you tried playing with lease-time in /ip dhcp-server lease? I'm using the ISC DHCP server because that's what I had before I was using MikroTik. They have a "max-lease-time" option. It's also possible for a cl...

rahulmkhj

Good day folks, I've been using Mikrotik as PPPoE server for quite some time now with Public IP "Pools" as remote address in the profile. Everything works fine. One thing I'm unable to figure out is how do I make mikrotik to assign a new IP each time a user logs in. i.e. if say, a user is ...

rahulmkhj

Thank you very much for responding.

One more thing I'd like to clarify, any traffic originating from any of the downstream ASes destined towards AS111111 will have both the ASes in the AS path.. right?

thank you,

rahulmkhj

I'm peering with two upstream providers on two different ASes and provide merged bandwidth to other networks in downstream.I know it can be configured using multiple instances with different/desired AS assigned. But my question is how routes from different instance/AS are merged/managed on RouterOS....

rahulmkhj

Hi,

Just wanted to know if it is possible with mikrotik to have one radius server for authenticating Hotpost/PPPoE users. And another radius server for accounting ? If yes, how?

Thanks!

rahulmkhj

I've two separate networks running in different geographies. However, we intended to link them both together and opted for a Point-to-Point leaseline connectivity from some other basic service provider. I wanted to use this link between two locations as "Trunk" to carry multiple VLAN for d...

rahulmkhj

I want to accomplish the attached network design. I've configured VLANs under /interface ethernet vlan and created bridges to create TRUNKs. The network works as expected. But the issue is even with 100Mbps traffic the CPU load on CRS112-8G-4S-IN reaches 100% which I'm not expecting. Just to make cl...

rahulmkhj

Hello rahulmkhj,
I am wondering is access manager supports, speed limit burst for mikrotik hotspot and ppp users?

1) No, Access Manager DOES NOT support Speed Limit Burst.
2) Yes, Access Manager DOES support PPPoE/Hotspot login with same ID.

rahulmkhj

I really need help in setting up Access Manager on my Ubuntu Server. Hoping to hear from you soon.

If you're facing issues setting AM up, please post it on forum.accessmanager.in

rahulmkhj

1) I did a quick search & didn't find the solution.
2) If this question is being asked so many times that you're getting frustrated answering it, lets suggest Forum Admin to make a sticky note of it.

rahulmkhj

Under the system/packages menu on RB450G. When I press 'download' or 'download & upgrade' I get following error:

ERROR: missing routerboard-6.22-mipsbe.npk

what can be the cause. And how to fix it?

Thank you,

Rahul..

rahulmkhj

As far as I understand, when we host a login page on external server from there we post the form to http://x.x.x.x/login which then redirects to appropriate html page. So, what I'm trying to do is, make the login request via ajax/jsonp and get the response in son format. Is it possible in any way?? ...

rahulmkhj

Radius is a Protocol, so there is no such term as compatible radius. If its a Radius server IT can be used with Mikrotik RouterOS to authenticate users. Freeradius seems to be the most popular in the industry and is Open Source. But it CANNOT BE installed on RouterBOARD itself.

rahulmkhj

Since you need L2 connectivity across premises for plex media servers. Why would you install 2 Mikrotik routers in the first place. You could simply bridge LAN on both locations use one single subnet on all devices in both premises. For internet fail-over, you could get installed both links cable-mo...

rahulmkhj

Can you pls draw the requirement in a paint file? That'll help us better understand the exact requirement.

rahulmkhj

You might be looking for something like: http://wiki.mikrotik.com/wiki/Advanced_ ... _Scripting

rahulmkhj

You can use different radius server for different services only. For example userman for Hotspot and External radius for PPPoE. But, afaik, You cannot have one service say hotspot using two different radius servers.

rahulmkhj

I am going to try and use this software. Accessmanager.in I just want to make sure the following before I create a test server. 1. Can a user create there own user name and password to login with. 2. Is there a pay for use option and if so what else do I need to set it up? Thanks Support for self r...

rahulmkhj

Sorry i meant i have tried to install accessmanager.in on a Ubuntu server without any luck Sendt fra min GT-I9305 med Tapatalk I would like to mention, I'm the one to develop it. And, if you find any issues with installation or anything related to it. You can post them on http://forum.accessmanager...

rahulmkhj

I have tried to install user manager 2 times without any luck. Would be nice to have iso install or vmware.. the install guide isnt that good Sendt fra min GT-I9305 med Tapatalk User Manager is simply a RouterOS package. You simply need to copy the package file into /files and reboot the router. An...

rahulmkhj

I always suggest searching the web for your requirement before we start polluting the WEB with duplicate content. Following document should have everything about Mikrotik hotspot.

http://wiki.mikrotik.com/wiki/Manual:IP/Hotspot

rahulmkhj

You may want to check: Access Manager http://accessmanager.in . It won't generate batch of random users, but gives a lot of other features including voucher printing, email alerts, prepaid plans, session/recharge history, paypal etc.

And is free to download/use, if you may want to.

Thank you!

rahulmkhj

If you're planning to allocate same amount of bandwidth to all of the users. I suggest using PCQ that way you need to create only one single queue to manage whole subnet, and I see that as an efficient way to do that.

rahulmkhj

I've got the same problem, I believe this is a bug of the User Manager latest version, why? For Hotspot If you set "Limit Uptime", ok in the "Status page" & in IP > Hotspot > Active > Session Time Left, it SHOWs the "Time Left" normally, For User Manager Even, for ...

rahulmkhj

I myself would use it, but I want to make a "idiot proof" system that will be used by the employees, which are affraid of every new thing and god forbid that there is one form that doesn't need to be filled:) I want to make is as simple as possible for them to use: - Enter data - Click Se...

rahulmkhj

Have you defined time limit in profile? Because session-time-left will be there only if you've defined time-limit.

rahulmkhj

I already did that, but I realized what I was doing wrong. I disabled Bridge > Settings > Use Ip firewall and now I can reach 500 mbits nothing more yet... but I will keep trying to reach more performance. Thank for your help and wasted time :) The better WaY of thanks is giving karma.. ;)

rahulmkhj

You don't need to manually create queues for hotspot users, when a hotspot user logs in associated with this profile, a queue will be dynamically created with rx/tx limits specified in the general tab of the profile.

rahulmkhj

In routing 0.0.0.0 works like a wildcard that matches each and every IP address. which in your case means: block any source for any destination. define source address i.e. 192.168.100.0/24 as the subnet you want to disallow to access and IP address of the server you want to block access to. Or you m...

rahulmkhj

Add 2 rules in IP > Firewall > Filters i) chain= forward source-address = 10.10.1.0/16 dst-address=192.168.20.0/24 action=drop ii) chain= forward source-address = 192.168.20.0/24 dst-address=10.10.1.0/16 action=drop That should do it. that block both side i want to block one side user1 10.10.0.0/16...

rahulmkhj

Sorry for my bad explanation. Ok, After the change I checked that unfortunally with queues, firewall filters, queue tree and mangle, the thoughput between machines and the "server" become low. I want to know, if is possible to bypass everything mentioned above inside a bridge. Another way...

rahulmkhj

You should know that radius manage itself uses freeradius for AAA.

rahulmkhj

Radius Manger?

rahulmkhj

Hi, Thank you for responding, your help would be appreciated. I would like a user with account "user1" to have limited bandwidth in the morning (ex.. 500mb) and an no limit at night from 12:00 am to 06:00 am. I understand that I can use queue to achieve that, am I right? Regards Queues ar...

rahulmkhj

helo all really i need help in How do I know the amount of DownLod for a pppoe clients in one month ? my problem is ---> when the client reboot his brodband router , the mikrotic timer (tx) back from 0 and calculate again this is abig problem to me , im using hotspt very good but i have some custom...

rahulmkhj

Can't get your question, can you please elaborate ?

rahulmkhj

Thanks for reply!

add action=drop chain=forward disabled=no dst-port=!80,443 hotspot=from-client protocol=tcp

such variant is possible?

It should be .. and trying doesn't cost ..

rahulmkhj

yes, you got it right. But there is a little bit more .. A detailed guide on how to setup everything is available here: http://accessmanager.in/toc.php

rahulmkhj

hello PPPoE session limit per user How can I put?

What do you want to accomplish? Simultaneous sessions limit? or limited sessions .. i.e. time-limit data-limit etc.

rahulmkhj

RB1100AHx2 can be used for subscriber management as long as it can handle bandwidth & number of users you want to manage. And for subscriber management software, there are a number of ways doing this. Depending on the features you may require, like printing prepaid vouchers, online payments, ser...

rahulmkhj

Do you use hotspot??

rahulmkhj

IP > Firewall > Filters Add
src-address=<your-lan-subnet> chain= forward protocol=tcp dst-port != 80,443 action=drop

rahulmkhj

Add 2 rules in IP > Firewall > Filters
i) chain= forward source-address = 10.10.1.0/16 dst-address=192.168.20.0/24 action=drop
ii) chain= forward source-address = 192.168.20.0/24 dst-address=10.10.1.0/16 action=drop

That should do it.

rahulmkhj

If you just want to limit down/up bandwidth, simple queue will do.

rahulmkhj

+1 for RB1100AHx2.
I've been using it with 200+ users (Hotspot+PPPoE) + BGP Peering with 3 upstreams for more than a year now.. without any issues.

rahulmkhj

I guess, no additional special configuration is required.

rahulmkhj

first: The following gives you list of all active (currently logged-in) users. /ppp active print second: Mikrotik as a router, doesn't store these logs. But, if you use external radius server with accounting enabled, these will be stored their. third: You cannot manipulate with websites over SSL, I ...

rahulmkhj

I connected Access point via mikrotic PPPoE server . how I know the client connected to access ??

Following gives you list of all connected clients:

/ppp active print

rahulmkhj

Hello everyone, I want to create a captive portal using PHP to manage user acces to our network which is provided by a mikrotik routers in my restaurant ,so we want to give each user a limited period of time connexion depending on how much they consume,and i want to control the size of data that th...

rahulmkhj

Hi i think i may have done something stupid... i was trying out the dude today, and after launching the software it started mapping my network. after a while i got warnings from the dude that the services on my router (rb750g) were unavailable. as i was unable to reach webfig and winbox didn't keep...

rahulmkhj

You can use firewall rules to match & log source address of matching requests to logging server. Or you can create an address list and add source addresses to them.

rahulmkhj

Dear All, Please help me. How to block Game Online on Facebook. Only block game. Not block Facebook. You can sniff, block or do anything with the URLs on the router, only if they are unencrypted. Since, most of the users use facebook over ssl, I don't think that's possible.. there are workarounds l...

rahulmkhj

Hello, Please help me with a quick setup of Mikrotik RouterBOARD 750 router. I made the following steps: 1) Started the router and accepted all default settings: http://i.imgur.com/72ZSpvw.jpg 2) Created a PPPoE interface (set username and password, enabled the interface): http://i.imgur.com/zFNYmz...

rahulmkhj

Thanks for your quick answer. I try to register to the forum, but it doesn't work: I got "Could not open socket" after sending registration data. Did you tried login with google/OpenID?? That module have issue and isn't working yet .. It was a temporary server issue, just been fixed. Than...

rahulmkhj

Thanks for your quick answer. I try to register to the forum, but it doesn't work: I got "Could not open socket" after sending registration data.

Did you tried login with google/OpenID?? That module have issue and isn't working yet ..

rahulmkhj

Very nice work to reduce the Usermanager to a practical interface for hotel employes and others. But how will it be configured with router os? There is only an example for freeradius on your webpage. And it would be nice to have the possibility to print out user access and session data. You might h...

rahulmkhj

wrong username ...

You must be trying to login with the credentials mentioned above.
Since its a new version, demo have also been updated with following credentials:

Admin Panel:
demo.accessmanager.in/admin
User: admin Password: 123

User Panel:
demo.accessmanager.in
User: demo Password: 123456

rahulmkhj

great work but only hotspot any plan to launch pppoe support

thanks

Hey!

We've re-written the entire application. This time with downloadable (Free) version and it also supports PPPoE.
You create one account and use it login via either of Hotspot of PPPoE.

Cheers!!

rahulmkhj

Hello everyone, I want to create a captive portal using PHP to manage user acces to our network which is provided by a mikrotik routers in my restaurant ,so we want to give each user a limited period of time connexion depending on how much they consume,and i want to control the size of data that th...

rahulmkhj

Hello People,

Just a quick question, I've a RB1100AHx2 running routeros 6.10. It came with 2GB of RAM pre-installed. I was just wondering if I can upgrade it to say 4Gb or 8Gb ..?

rahulmkhj

You may want to check accessmanager.in .. A Free Hotspot Management System.
Feature Highlights:

Multiple Routers
Hotspot/PPPoE Support
Bandwidth policies
Service plans
Prepaid Vouchers
Paypal
User self care portal

I just put it online for download.

rahulmkhj

Hey all, Hopefully this is in the right spot. I'm not really sure if it belongs here or in the User Manager area. I'm trying to set up RouterOS as a router and hotspot manager for a Hotel in a rural town in Australia. The internet access is limited, and the best we can get is Mobile Broadband with ...

rahulmkhj

it can be done or not just a simple advice PPPOE users i need to regenerate a pincode to reactivate the same pppoe username and password when the account expire?????? using usermanager If you're not strictly stick to usermanager, you may have a look at http://accessmanager.in . It allows you to gen...

rahulmkhj

Hello every one .. :D I bought rb2011 and i want to combine bandwidth for 4 pppoe clients like 2Mb+2Mb+2Mb+2Mb=8Mb so i tried many methods like nth and pcc but it didn't work out :( , It always bring me bandwidth no more than 2 Mb like it shown in the video: https://www.youtube.com/watch?v=BFrLOpow...

rahulmkhj

I think that this isn't the correct solution, is this possible? When i do a speedtest with 2 pc's (at the same time) i have 5mbit up and 5mbit down on each. I want to limit the speed so that the maximum speed per ip is 10mbit, not in total for an interface. The uplink (WAN) is 1Gbit, I just don't w...

rahulmkhj

Hotspot works on interface only. So, you may setup hotspot on one interface and configure one other interface to cater computers in cafe.

I assume you know, how to setup hotspot on mikrotik.

rahulmkhj

haven't you contacted DMA Softlab support? They can be helpful more than anybody else, in regard of their application. im just new to dmasoftlab, i would like to try their 30 day trial, and ive downloaded kinds of versions of trial. just dont know where to start hehehe.. thanks for the reply Even i...

rahulmkhj

haven't you contacted DMA Softlab support? They can be helpful more than anybody else, in regard of their application.

rahulmkhj

I guess, you missed the edit I made to my post above.

This is not the problem, because hotspot have to work on LAN interface only, which have IP adddress 172.16.0.254. I changed the interface because I didn't wanted to activate it on LAN interface until I fix this issue.

Thank you

rahulmkhj

Have a look: ip hotspot print Flags: X - disabled, I - invalid, S - HTTPS # NAME INTERFACE ADDRESS-POOL PROFILE IDLE-TIMEOUT 0 server1 hotspot default none ip hotspot profile print Flags: * - default 0 * name="default" hotspot-address=172.16.0.254 dns-name="acce.ss" html-director...

rahulmkhj

Thanks for replying surfertime, Actually, thats not the issue. The issue is: mail.yahoo.com won't open even after successful logon. I tried it with my own laptop. Same issue was there even if I bypass from Hotspot i.e. allow subnet in walled garden IP list. And its not that it won't open at all. Som...

rahulmkhj

Hello Everyone, I'm facing issue with my hotspot setup with BR1100AHx2. Users having trouble with mail.yahoo.com & hotmail.com (DNS name won't resolve). Even in case I bypass all IPs from Hotspot & just keep it enable to check. The issue still persists. After searching for several days now, ...

rahulmkhj

Nobody have no clues ..??
Please help guys.

rahulmkhj

Dear folks, I'm going through a weird problem. I'm using RB1100AHx2 with hotspot setup. And using external radius server for AAA. Everything works fine with 2-3 users authenticated. But, as more users login. The latency goes very high. for example, 8.8.8.8 goes to 600-700ms, while in general it goes...

rahulmkhj

Keep Checking - Looks real good.

Can't wait to test with some Access Points.

Please remember to email us when we can sign up and test.

Regards

Bnet

I suggest you find Access Manager on Facebook or follow us on twitter @accessmanager . And be the first to know as it launches.

Thanks!

Rahul..

rahulmkhj

Like the look at the hotspot manager but these guys so not contact anyone. Sent 3 emails already.....so looking very promising for after sales service???? Access People - contact me please I apologies, for the delay. The sign up form available on website is for pre-registration, and if you've signe...

rahulmkhj

I've read on several pages that, a website hosted on a IPv6 address will not be accessible from any PC with IPv4. Is it so? And what about accessing a website hosted on IPv4 from a PC with IPv6 assigned??

rahulmkhj

hey folks, I've noticed something that seems pretty weird to me, and thought of discussing it with you guys. Actually, I'm peering (BGP) with 2 upstream providers. ISP1 - Remote Address - 1.2.3.4 ISP2 - Remote Address - 5.6.7.8 earlier, they were providing me only with default gateway(s) over BGP se...

rahulmkhj

Hi everyone, i want to use my hotspot login just for restricted web access ex. if user want to access to social media site, they must login hotspot and the other web site doesn't need login hotspot i've already try using this script and it's work's ip hotspot walled-garden add server=hotspot1 dst-h...

rahulmkhj

c't login invalid usernam and password Thanks for bringing it into notice. Someone, had changed Admin Password. Anyhow, I've fixed this and it won't happen again, as "Change Password" module have been disabled. It'd work now with following credentials: user: demo@accessmanager.in pass: 65...

rahulmkhj

Hello Folks,

I need it urgent. I'm using SNAT for all out going traffic. But, I don't know, how to log all Private - Public IP pairs. Anybody knows that?

Thank you,

Rahul..

rahulmkhj

Hello People,

I'm successfully using SNAT with RouterOS. But, now I want to log all Public - Private IP pairs to my database. To generate a report now, who was behind which public IP. But, don't know how. Please help!

Thank you,

Rahul..

rahulmkhj

can't login to the system. perhaps in-correct credential.

corrected. Check Now.

Rahul..

rahulmkhj

Hello Everyone! I'm running my own IPs via BGP in a Multi Home scenario. Now, one of my customers have got their own IP pool & would like to advertise. But, I don't know how to do that. How can I do that. Can it be achieved by installing another routeros on customer's network edge. If Yes, I nee...

rahulmkhj

will it work behind a firewall(the coa) and also for the coa to work we have to save the access point userid and pass in your database and it is not safe For CoA - Yes, as long as packets on port 3799 from Access Manager to your Mikrotik are allowed, it'll work. And you don't need to save your AP's...

rahulmkhj

first thing in accessmanager.in it does not support CoA as this is hosted and and firewall is not configured it will not CoA(on the fly plan changing) like i want to give users 5am to 11pm 512kbps and 11pm to 5am 2Mbps is this possible(i guess no) no postpaid invoicing Aaah.. you're wrong.. its doe...

rahulmkhj

great work but only hotspot any plan to launch pppoe support

thanks

Thanks for your appreciation. But, as we're just about to launch, hotspot itself requires a lot of effort on it. Thus, no plan for pppoe in near future. Lets see how long it takes for pppoe to be there.

Rahul..

rahulmkhj

Tried to Sign Up - Not Working. When can we try this? Hi, As I wrote, the project isn't complete yet. Though we've provided a demo version of Admin Panel as well as user portal. So, that you can have a look on the features we've developed so far and share your views on that. Anything you like about...

rahulmkhj

Please install freeradius-mysql component for centos yum install freeradius-mysql for ubantu/debian apt-get freeradius-mysql your freeradius-mysql is not working so the you are getting sql module error try apt-get purge freeradius freeradius-mysql freeradius-common then apt-get install freeradius f...

rahulmkhj

I already mentioned the link: http://accessmanager.in .. for online demo check this: http://accessmanager.in/livedemo.php

Hope this helps!

Rahul..

rahulmkhj

Please tell me, i set a hotspot server to run to limit torrent downloading from wireless users but i want them to take ip addresses from the dhcp server (my old modem-router) i already have, not from the mikrotik.(because i have many ip devices already running) Or atleast say the hotspot server to ...

rahulmkhj

Hi, I have been using osbridge AP's and its onboard hotspot controller chillispot to redirect traffic to a third party hot spot controller. I have started using Mikrotik Ap's and want to achieve the same. I dont want to use the MK Hotspot functionality, just have wired or wireless clients get redir...

rahulmkhj

hello all, I am faced with the option to setup a wireless ISP with Mikrotik router board 433. This is what they want. 1. To use the Mikrotik to assign a bandwidth to each ip address on the wireless (assigning I assign the wlan ip address range of 172.16.10.1/24 range, so that if i give a client say...

rahulmkhj

tombee79 please kindly explain without bridge interface such as for e.g hotspot setup on interface ether1 192.168.2.2 hotspot setup on interface ether 2 192.168.3.3 then radius add 192.168.2.2 shared 1234 then radius add 192.168.3.3 shared 1233 ???? please explain i really need to make the multi su...

rahulmkhj

Hello, Can I use user manager for third party ap authentication like tp-link or dlink and how if I can? Thank you in advance! In such case, you can use Access Manager http://accessmanager.in . Their you can all your other APs i.e. tp-link, dlink etc in bridge mode while all other tasks i.e. DHCP, a...

rahulmkhj

Is there any other brand I should be looking at to run my hotspot successfully as I do not see MikroTik giving their customers any support. Wish I knew this before I invested in their undeveloped ROS/User manager. I think your are an insult to the IT industry. Why the hell have a payment system if ...

rahulmkhj

Ok, so having run a hotspot based on an open source project for a large hotel for the past year, i decided that it would be time to "Upgrade" to a commercial solution. I did some research and played around with RouterOS for a few days and decided it was good enough to merit spending $200 ...

rahulmkhj

I guess, I can suggest a much easier solution for this. Check http://accessmanager.in . It offers a complete registration form for demographic inputs including name, address, phone number, email address & a few more.. I hope it help.

Btw.. Its free.

rahulmkhj

Hi i have just started using the UserManager it's quite good but the problem is i want the users to be able to view their past uses session details is there any way of doing this?? Thanks Hey I hv not used usermanager, but, this feature is built into Access Manager's User Portal. Users can view the...

rahulmkhj

can u help me to do dis I suggest you check its demo at http://accessmanager.in/livedemo.php and if you find it interesting fill up this signup form: http://accessmanager.in/signup.php once you get your account activated. You ll get all required help directly from Access Manager support team. :) Ra...

rahulmkhj

Hello all, I want to find out if it is possible for Mikrotik to display currently active users in hotspot in the user manager interface. Assuming a user just logged in, can it be displayed in user manager the minutes/time currently in use, the bandwidth in use and others, just as it is displayed in...

rahulmkhj

Well, it's quite possible when using external RADIUS server (although I haven't tried it myself), but most of my clients won't bother to buy extra hardware (PC) which should always on, when they only want simple hotspot captive for a few clients, so I'm asking for possibility to CoA using internal ...

rahulmkhj

Wow sounds and looks great. Have PM you on facebook

Got it their, will get back to you on this very soon.

rahulmkhj

ya i know usermanager but i want some opinion for the differente radius client

You may want to have a look at: accessmanager.in

rahulmkhj

Good day... Dear buddy.. i was follow the guide from the following page with the command, but when testing, the Radius server is not responding. For the setup on the Ubuntu 11.04 server.. -sudo tasksel -sudo apt-get update -sudo apt-get upgrade -sudo apt-get install mysql-server -sudo apt-get insta...

rahulmkhj

i am looking for the solution with in mikrotik usermanager. i run my network of routers not on servers. Even with Access Manager, you don't need any servers. Just mikrotik router with a static ip on wan interface. Only issue you may have, is of shifting your clients from user manager to access mana...

rahulmkhj

It would be great If mikrotik add feature of adding serial numbers with each id, So that we can print voucher with serial numbers, and can search ids by corresponding serial number. I have customized the vouchers but unable to add serial number. I am working on MS ACCESS program to import ids passw...

rahulmkhj

I think you guys should check this: accessmanager.in . Much easier than RM and feature rich. And free too.

rahulmkhj

Check out: Access Manager. It supports a lot of features, including monthly subscriptions. Check this: accessmanager.in . Btw... Its free too..

rahulmkhj

I too would like to know how to apply cash payments to customers. At the moment our plans are "free" ; we just leave brief info regarding last payment in the comment field of the user and manually go through customers once a month. We also keep track of payments in a spreadsheet. This is ...

rahulmkhj

I can suggest you one solution, you can define FUP based service plans with. i.e. One plan with 30days validity, quota: 1Mbps upto 10gb & 256kbps beyond that until validity (30days) expires. Checkout: accessmanager.in

rahulmkhj

You might be interested in access manager. It supports limiting 10gb for 1Mbps & 256kbps beyond that. But it wont expire after another 10gb of data but on validity expire.

Check this out: http://accessmanager.in

rahulmkhj

hey! I guess, I've a solution for you.. we're just about to finish such project. That have subscriber management, prepaid vouchers, customized login page, works with Mikrotik Hotspot, Accepts payments via paypal and is free. Though service not launched commercially yet, but is about to launch in abo...

rahulmkhj

Hi,

We've also developed an application for user/subscription management for Mikrotik Hotspot. Have a look here:
demo.accessmanager.in
user: demo@accessmanager.in
pass: 654321

Rahul..

rahulmkhj

Hello Folks! We're working on a Hosted Radius Server project. That we'd like to offer in public & not planning to charge our users for that. Instead we'll be displaying a banner ad on your customer's "After Login Session Status Page" Though project isn't completed yet. I'd still like y...

rahulmkhj

Hello Everyone! I want to host hotspot login page on external web server. I found a reference for that: http://forum.mikrotik.com/viewtopic.php?f=9&t=62175 and this is working well as well. One thing I'm trying to do is: get nas-ip-address along with all others in this page. Anybody please help ...

rahulmkhj

Hey cbrown,

Thanks for replying.. but any approx. idea on Numbers will be more helpful.

Thank you once again.

Rahul..

rahulmkhj

Hi Folks, I'm working on a project for Hotspot Management using freeRADIUS & MySQL .. I just want to know any tentative idea on total number of Mikrotik Hotspot installations worldwide to date? That will help us decide, if we should support Mikrotik as NAS in our project or not? Any help will be...

rahulmkhj

Hello Everyone! I hv a RB1100AHx2, had it installed for BGP with upstream providers. I, by mistake, left it unprotected (without password) fr a while. And that time it got hacked(someone logged in & set a password fr that). And now, I'm unable to login/configure my router. I followed users guide...

rahulmkhj

Is there any way to use web-proxy with SNAT enabled on concerned IP Pool..?

rahulmkhj

Dear All, I want to setup mikrotik webproxy for IP/URL logging purpose. But, if I enable webproxy (need to redirect port 80 to 8080). It starts natting my lan ip pool (public ip) onto wan IP. Can we use Public IPs (or srcnat) on LAN side & still log url history for all users connected via hotspo...

rahulmkhj

Hello Everyone! I'm trying to setup RouterOS with radius authentication (CIITIX/daloRADIUS). It operates smoothly, while used with hotspot. But, with PPPoE after successful athentication I receive error: "terminating.. no network protocols running" (in RouteroS log). While it connects fine...

rahulmkhj

Yes, thank you.

rahulmkhj

Thank you very much for clarification...

rahulmkhj

Thanks for your reply buddy. But, I've already been to that page & didn't find answer to my question. As per this link, L4 supports only 200 PPPOE sessions & Hotspot users. But, I don't want to use RouterOS as Hotspot or PPPoE server. I just want to use it as BGP Router & user management...

rahulmkhj

Dear All, I've one linux box for managing users (authentication, bandwidth, IPs etc.) in my network. Now, I want to do multi-homing, thus require BGP. I would like to use RouterOS for BGP purpose and route traffic from my linux box to cloud through RouterOS. Now the question is can I use Level 4 lic...

rahulmkhj

Dear All, I've one linux box for managing users (authentication, bandwidth, IPs etc.) in my network. Now, I want to do multi-homing, thus require BGP. I would like to use RouterOS for BGP purpose and route traffic from my linux box to cloud through RouterOS. Now the question is can I use Level 4 lic...

rahulmkhj

Hello Everyone! I've been provided by RIR a /22 ip pool, i.e. 192.168.1.0/22. And I've a RoutrOS X86 installed on my computer for BGP communication with my upstream provider. What I need to do is, add one more router before RouterOS in my LAN network, & use public IPs on hosts in LAN. I know, th...

rahulmkhj

make a bridge and add ether1 and wlan1 ports. Thanks for prompt reply buddy!! I have added a bridge and added said ports (ether1 & wlan1). I can see traffic (Rx/Tx) on ether1 but only TX on bridge & wlan1 (only RX). I also tried enabling WDS Mode (dynamic) & used bridge I made as "...

rahulmkhj

Hello Everyone! I'm very new to MT, I've just installed 433AH board with Ubiquiti XR2 card (AR5413 2.4ghz). I want to setup a PTMP network using Ubiquiti NS2/L as CPE. I just installed my MT radio & changed its mode to "ap bridge" & I was able to scan "MikroTik" (SSID) on...

Search found 135 matches