And back to non-working state... when I moved to real hardware it does not seem to work at all. Queue is created, see some traffic there, but like 1% of real traffic for this client. Eg. doing speedtest I can see 200Mbit, but looking at queue live I can see around 200kbps traffic for this IP. What i...

Under /interface vlan the entries should have interface=bridgeINT not interface=ether1 . The first post in the thread you quote is similarly incorrect as pointed out by the second post. Which VLAN isn't receiving DHCP, the wAP appears to have multiple DHCP clients plus some DHCP servers which is un...

The wAP bridge config is a mess: 1# You have VLANs attached directly to a bridge port, they should always be attached to the bridge itself. 2# Don't add a VLAN with ID 1, this is the default PVID on bridge ports. 3# You have a mix of VLAN-aware bridge and switch VLAN configuration - these interact ...

MT Main config : [admin@MTmain] > export # nov/05/2023 13:51:30 by RouterOS 6.49.10 # software id = R483-S3DQ # # model = RBD52G-5HacD2HnD # /interface bridge add admin-mac=B8:69:F4:18:B0:E2 arp-timeout=30s auto-mac=no frame-types=admit-only-vlan-tagged ingress-filtering=yes name=BRIDGE-internal vla...

Why are you using openwrt anything for starters. Why are you using it as a router, it seems to be acting solely as a switch??.. Bottom line this is not an MT issue, suggest you try openwrt forum. so I had a chance to remove openwrt from the picture... currently the setup is as on picture with switc...

Why are you using openwrt anything for starters. Why are you using it as a router, it seems to be acting solely as a switch??.. Bottom line this is not an MT issue, suggest you try openwrt forum. Openwrt - I'd like to use a couple of the features (network apps etc) while it's not acting as a router...

Does the same issue persist if you bypass the OpenWRT (i.e. if you connect wAP ac to same trunk port of ac2)? haven't tested yet, it's remote site .. Tried to use Openwrt in transparant bridge mode, relayd did not solve it, but even kmod_trelay, or other _mod_available at that time, did not work. I...

Hi guys, I got back to mikrotik, as I wanted to use it's hotspot features, which I found most suitable for me.. The setup I have is : MT main router (AC2) ---- trunk ---- Openwrt ---- trunk ---- Mikrotik wAP ac Trunk carries vlans 5, 10, 90 (hotspot) The thing is that DHCP works till openwrt router....

I've just configured the Hotspot using Mikrotik Hap ac2, but there is no way to limit the rate per user. For some reasons, the rate limit option doesn't work in the User Profiles. In particular, I've set the value 20M/20M in the default "User Profile" and assigned this profile in the tab ...

Issue still there in 7.11
Anyone have it running in 7.x ? Can't mikrotik fix this ?

seems that it works in RouterOS6, but not RouterOS7
same issue as reported here viewtopic.php?t=187802

Hi team, I have remote MT with hotspot setup (still in test phase) on AC2 It was created with SETUP wizard and worked pretty well (besides ratelimits). I have login with HTTP chap, cookie and trial Yesterday I was reviewing documentation, and enabling additional features in order to test it later th...

changed ARP settings on VLAN90 on main router to reply-only
so far it works...

As expected I found that Main MT replies for ARP requests from Openwrt (whole range that is checked by VBAN spot app), ie. ARP table contains entries all pointing at main MT, even for non-existing IPs (no device with this IP in vlan90) Even devices that reside in vlan90 (like MT AP vlan90 ip address...

Hi folks I have a bit weird setup, possibly could be done other way, but I wanted to use hotspot VLAN to have also access to broadcasted radio (even without internet access) ┌─────────────┐ ┌──────────────┐ ┌──────────┐ │Streaming PC │ access10│ OpenWRT │ trunk 10,90 │ MT AP │ │ VLAN 10 ├──────────┤...

Hi, I've configured my RB exactly like in this Greg sowel's video http://www.youtube.com/watch?v=OBlUaZw9uNU it's L2TP(IPSec) + windows 7 configuration it's working fine.. I get address from vpn pool, I have access to local resources, but I have few questions... - is it possible to send l2tp client ...

/ip firewall mangle add action=mark-connection chain=prerouting comment=ICMP disabled=no new-connection-mark=icmp-con passthrough=yes protocol=icmp add action=mark-packet chain=prerouting connection-mark=icmp-con disabled=no new-packet-mark=icmp passthrough=no add action=mark-connection chain=prero...

Hi I'm beginning to implement QoS at my home network. My connection is 6M/0,5M (I know, upload sucks) I'm trying to understand how everything ticks I've read on QoS Megis that Interface HTB is unaware of inside addressing... So for UPLOAD stream I tried setting as a parent GLOBAL-OUT interface. But ...