MikroTik

jlct021

Having the same problem. Tested with old RB750GL as well as new RB960PGS. No other devices connected to the router; just WAN (Fibre 10Mbps 1:1) on ether1 and my laptop on ether2. Same speed tests on ISP provided Zyxel shows consistent upload speeds of +- 9Mbps. Same results with all Firewall rules d...

jlct021

Hi everybody! I've configurated CAPsMAN v2 between CloudRouterSwitch109 and RouterBoard951Ui, os ver.6.35.4. The problem is when client moves from one room to another, his devices stays on first AP with bad signal -76db, while second AP have better signal -45. what I should to do for seamless roam...

jlct021

Name: 1M
Name for users: 1M
Owner: admin
U have to change " Name for users " in all u r profild dn't leave it empty

Thank you, that resolved the issue for me.

jlct021

Hi All We've successfully setup a HotSpot with UserManager for a Guest House. However our challenge now is how to continue to allow the existing Port forwarding, and bypass the HotSpot so that the DVR can continue to be accessible to / from the outside world? I've Included a Diagram showing the setu...

jlct021

1-open login.html with an editor like notepad 2-search $(error) 3-replace with java script code in last post. it's completly easy. Thanks! Extract of edited login.html page: ==================================================== <br /><div style="color: #c1c1c1; font-size: 9px">Powered by M...

jlct021

Old post but seems the problem is still knocking about, below worked for us as far as changing the error goes: http://forum.mikrotik.com/viewtopic.php?f=10&t=84627&p=424247&hilit=The+local+language+tips#p424247 Extract of edited login.html page: ==========================================...

jlct021

The below is working as a workaround for us, as in our case we know there is a valid profile and that the quota has simply been reached:

http://forum.mikrotik.com/viewtopic.php ... 08#p498308

jlct021

The below suggestion worked for us: (v6.31), (User Manager) http://forum.mikrotik.com/viewtopic.php?f=10&t=84627&p=424247&hilit=The+local+language+tips#p424247 Extract of edited login.html page: ==================================================== <br /><div style="color: #c1c1c1; f...

jlct021

no one has a solution for this? *bump* Our users are created in batches by our clients when needed. Valid for two weeks, with different quota amounts. After quota has been reached and client tries to log back in the below error is generated: "non valid profile found' For clarity we'd like to c...

jlct021

Ordered an extra antennae (which took some time to arrive.)
Configured AP as bridge as per your suggestion and all working well.
Thank you!

jlct021

Hi, our office space is flooded with 2.4 Ghz and so want to switch to 5.8 to avoid issues / improve performance. I've an RB411AR (v6.30), + 1x R52Hn (wlan1) with onboard radio (wlan2) disabled. Have setup a basic AP with wlan1 and ether1 Bridged (bridge1), DHCP client on ether1 and DHCP server on br...

jlct021

Reset to factory default, checked all was as you sugested and the crazy ping times to the rb seem to have stabalized. Will keep an eye on it and email supout.rif if happens again. Thanks

jlct021

Unit is on site at the moment. (Am going back tomorrow) Signal strength was anywhere between -35 (if next to the rb) to -65 (if upstairs) Didn't turn any chains off, didn't change the distance, changed the Chanel to 20mhz (all else is factory default with no other interfering devices) No matter if I...

jlct021

Same problem. Signal strength shows up as great; but pings to the RB (from multiple devices / varying distances both near and far) and diabolical. I don't want to disable a chain as if I understand this will reduce signal strength and I need all I can get for this install. (lots of walls etc) Any bo...

jlct021

Havn't tried Hotspot / Usermanager yet. (Want to limit staff having to do anything more than changing WPA2 key daily if possible) Ended up creating a /27 LAN subnet (DHCP lease of 3hours) with 29 simple que's. script1 every 2.5 minutes limiting users to 75/75kbps if they exeed a 100mb total. script2...

jlct021

Thanks In addition I also changed :for i from=192 to=206 do={ to include the broadcast ip after which it ran. However it seems I'm still facing the problem of needing separate /32 simple queues for each user i want to limit. I say this because when I run the script: /system script print Flags: I - i...

jlct021

Thank you

The network I intend to use this on is a /24

Is there a way to apply the script to a sigle simple queue with a /24 target address?

Or must a simple queue be created for each address on that subnet?

Simple queue for each IP is the only way I've been able to get it to work so far.

jlct021

What version of RouterOS are you running? /system resource> print version: 5.22 1. The original script has syntax issues. There are a couple places where there should be no spaces. Example ":for i from=1 to= 254 do = {" 2. Also, the script won't find the IP addresses unless a subnet mask ...

jlct021

If on the right track Queues is where I need to foucus. Found the following script that looks it could do the job: http://wiki.mikrotik.com/wiki/Limiting_a_user_to_a_given_amount_of_traffic_II :local traf; /queue simple :for i from=1 to= 254 do = { :if ([/queue simple find target-addresses=("19...

jlct021

To try get this script working: http://wiki.mikrotik.com/wiki/Limiting_a_user_to_a_given_amount_of_traffic_II :local traf; /queue simple :for i from=1 to= 254 do = { :if ([/queue simple find target-addresses=("192.168.1." . $i)] != "") do={ :set traf [get [find target-addresses=(...

jlct021

Hi RouterBoard 751 5 LAN, 2,4GHz AP using WPA2 encryption. Small coffee shop that provides free internet to customers who purchase something from the shop by way of a WPA2 passkey that gets changed by a member of staff each morning. Problem (that Ive been contacted to solve) is that (some) customers...

jlct021

rb750gl.jpg Receiving internet via pptp from remote location on ether5 ether 4,3, are switched, ether4 is master with DHCP server enabled (172.18.128.206/28) DNS is enabled and set to allow remote requests (172.18.1.1) Internet is working on the above subnet Have created 192.168.1.254/24 subnet on ...

jlct021

Tried the following: Src IP: 172.18.91.153 Dest port: ether1 (also bridge1 and wlan1, no result) Action: drop None of the above had any effect what so ever. (internet traffic or otherwise) I noticed that under ip's ether1's ip is 192.18.88.1, wlan2's ip is 172.18.91.158 forming bridge1 ip 172.18.91....

jlct021

Thanks The modem is plugged into ether1 which is bridged with wlan2 (bridge1 interface) ether1 connects to a desktop switch that has both the nanobridge (172.18.91.145) and modem (172.18.91.149) connected to it Will using "ether1" rather that Dest IP not prevent "all" traffic ori...

jlct021

Hi Need to block internet but not local traffic for an individual ip address only. Ive an rb411ar, that connects to and adsl modem / router, that has a Ubiquiti NanoBridge in the mix all joined together via a desktop switch... rb411ar ip = 172.18.91.158, adsl modem ip = 172.18.91.149, NanoBridge ip ...

jlct021

Unofficial IRC channel: #routerboard on irc.z.je (IPv4) or 6.irc.z.je (IPv6)

Thanks

jlct021

Thanks.

To my surprise I've discovered that by default I can reach the ADSL Modem / Router in the main house with out making any changes to my RB despite the Modem being on 192.168.0.1/24 while my RB is on 192.168.88.1/24

jlct021

central location would be main building where adsl line meets adsl mode / router if i understand the question?

no unfortunately i don't have another rb750 at the moment

jlct021

standard adsl modem / router with rj11 or rb750 type with rj45 wan port?

jlct021

Unfortunately not as the ADSL Modem / Router in a separate building and being shared by others.

The rb750 is in my building (bridged by 2x Ubiquiti Nano M2's)

jlct021

From time to time I need access to our ADSL Modem / Router thats plugged into the WAN port of our RB750 to check for errors etc. But want to avoid having to plug it directly into my pc each time I need access to it. How can I gain access to it via the WAN port of the RB750? ADSL Modem / Router IP: 1...

jlct021

Set antennae Gain to 17 db This together with placing the RB low down (about 2 feet off the ground) has reduced the signal sufficiently. I have a new challenge though: How to gain access to the RB from the main office (about 50M away) via the LAN cable connected to WAN / POE port? So that staff can ...

jlct021

Awesome, thanks.

On my way to collect RB751

jlct021

I'll follow your suggested method. Though I assume its not possible to damage a card by setting the Tx too low? Am I correct that these setting are ROS and not hardware dependent? I intend to buy the RB751 with built in radio card / antennae Are the settings still adjustable on integrated RB's with ...

jlct021

Awesome.

Are there any pro's and cons to using the one vs the other or do they both achieve the same end safely?

Thanks

jlct021

Hi We need to install an AP and reduce signal strength in a clients coffee shop to cover just their shop space +-7m by 7m And am considering purchasing them an RB751 At home on my RB411 I have tried the following: Winbox Interfaces wlan2 (wlan is disabled) Tx Power Tx Power Mode: all rates fixed Tx ...

jlct021

Hi

Sorry for reposting but have been unable to work out if this is do-able or not on my own.

Is it possible to mirror ports 2,3,4 to target port 5?

If so how?

I'm trying to send all traffic passing through my router to a collector. (pmacct)

Thanks

jlct021

If it can I cant see how either

found a nice little tool that can though

http://www.aptivate.org/pmgraph

busy giving it a spin

jlct021

The collector is Bandwidthd

Have tried all I can to work out what port its listening on with no luck.

If anyone has managed to get Bandwidthd to work with Traffic-Flow please let me know how?

jlct021

Hi

If using Traffic-Flow with a collector that's running in Promiscuous mode;

What port must Traffic-Flow be told to send traffic to?

Thanks

jlct021

Is it possible to mirror more than one port?

ie to mirror ports 2,3,4 to target port 5?

jlct021

opening a terminal and entering

/interface ethernet switch set numbers=0 mirror-source=ether2 mirror-target=ether5

seems to be working

jlct021

Hi 10PC's LANed up (using 2 desktop switches) to an ADSL Modem / Router Is it possible / advisable to connect these PC's to ether2 on my RB750GL, mirror that port to ether5, then connect a pc running bandwidthd to ether5 to gather bandwidth usage for all 10 of my pc's? If so how can I go about doing...

jlct021

Hi I've a small network of +- 10 pc's some cabled some wifi. My equipment is a RB450GL and an RB433AH (for wifi) coneted to an ADSL modem. Up until now I've always used iether IPCOP with Traffic Control and Report addon or Smoothwall with Bandview Add-on to monitor users bandwidth usage but in the i...

jlct021

OK lets say its not a server that needs to be shared but a printer does the same apply?

I'd like to separate two groups of users but allow them both access to a network printer....

jlct021

The equipment I have available is:

RB411AR
RB750GL
Desktop (dumb) switch
IPCOP box

jlct021

Thanks for the reply's.

Is creating separate VLAN's in any way a solution?

jlct021

Hi RB750GL with port1 as WAN / PPPoE, port2 is master switch with a dumb desktop switch attached that connects to my pc as as well as a pc running virtual machines (ESXi), port2 has an RB411AR attached setup as an AP with 5 wireless clients, port3 is connected to a LANed client, port 5 is available....

jlct021

Thanks; up and running.

jlct021

Added NAT / Masquerade rule in Winbox under Firewall settings.

There are now two NAT / Masquerade rules one for ether1-gateway the other for pppoe-out1

chain=srcnat action=masquerade

no traffic flowing over pppoe-out1 interface

no internet

any help welcome

thanks.

jlct021

I though i had as the following is set by default: The following default configuration has been installed on your router: ether1 is renamed ether1-gateway, rest of interfaces are switched IP address 192.168.88.1/24 is on switch DHCP client is on ether1-gateway DHCP server is on switch, with address ...

jlct021

Hi Trying do use PPPoE on RB750GL to dial out via ADSL modem set to bridge mode. I've set my ADSL modem to bridge mode, Using Winbox added pppoe client to ether1-gateway, entered my isp user name / password. Status says connected yet I'm unable to connect to the internet. ether1-gateway address is 1...

jlct021

Will configure it so.

Thanks.

jlct021

Thanks.

How does having ports 2-5 open and port 1 closed make it more secure when 2-5 are going to be used by "clients" where as port 1 is going to be linked directly to me?

jlct021

Thanks. Can I simply change port one to master port (but still use as PoE) and the remaining 4 to slaves thus doing away altogether with using port1 as WAN port with out compromising anything? I don't need DHCP or any firewall rules anywhere on this switch as I use static IP's and so will assign por...

jlct021

Yes; with no luck. Below are my default settings: The following default configuration has been installed on your router: ether1 is renamed ether1-gateway, rest of interfaces are switched IP address 192.168.88.1/24 is on switch DHCP client is on ether1-gateway DHCP server is on switch, with address p...

jlct021

http://wiki.mikrotik.com/wiki/Manual:First_time_startup Overview After you have installed the RouterOS software, or turned on the Router for the first time, there are various ways how to connect to it: Accessing Command Line Interface (CLI) via Telnet, ssh, serial cable or even keyboard and monitor ...

jlct021

Id like to place my new RB750GL in a ceiling about 30 meters away from my 4port ADSL modem where 4 pc's (not belonging to me) will connect to its remaining 4 LAN ports. (the first being used to power it by POE and feed it and the 4 pc's internet. In this scenario how do I access my RB750GL as from w...

jlct021

Hi I'm using an R52Hn radio card in a RB411AR with ether1 and wlan2 bridged. My 411AR connects via a 3M cable to a 2.4GHz 12dBi Vertical Omni Antenna the specifications of which are: - Frequency Range–MHz: 2400-2483 - Bandwidth-MHz: 83 - VSWR: ≤1.5 - Input Impedance -Ω: 50 - Polarization: Vertical -...

jlct021

Thanks for the quick reply. My question on weather or not I need a separate RB (i.e RB750) from my AP (RB411AR) stems from my not understanding the following extracts from http://wiki.mikrotik.com/wiki/User_Manager/Wireless_Example "Note, first local router database is consulted, then User Mana...

jlct021

Hi In order to use UM for Wireless Users do I need a separate RB (for example an RB750) as well as (my) RB411AR? My current setup is a RB411AR (with R52Hn card) that connects to an IPCOP firewall that in turn connects to an ADSL modem. RB411AR is setup in ap bridge mode with wlan2 and ether1 bridged...

jlct021

can freeradius and or user manager send traffic reports via email to user(S)

jlct021

Can User Manager be used without Hotspot? Do I need a dedicated Radius Server in order to use User Manager? I just want to be able to see who's online, how long they've been online, total usage, and as a real bonus be able to send usage reports via email to users. Currently I'm using IPCOP with traf...

jlct021

Ticked the Ping ARP Box and now can ping my laptop. Should one always have to enable / tick this to be able to ping? Can also now connect to the internet via RB via Firewall. Ping MS's are at about 300 which seems a bit delayed... Set wan1 to G only and i think that sorted out the 11mbps. (its now 5...

jlct021

Thanks, done. I now have (under my address List in Winbox) 192.168.2.253/24 - Bridge1 Default Config 192.168.88.1/24 - ether1 I can now connect to the new Mikrotik SSID from my laptop and see it under Wireless / registration, but cant ping it. Nor can I ping 192.168.2.253 from my laptop. In winbox I...

jlct021

Okay, from what I gather my firewall is doing the natting. So i need to assign an IP address, in this case 192.168.2.253/24 to the bridge interface... which interface; ether1 or wlan1 is the bridge interface? And if I assign the above IP to iether one if the above interfaces, how are they going to c...

jlct021

Hi My setup is an IPCOP firewall connected to an adsl modem in bride mode I currently have an Edimax Access point connected to the Blue interface of my Firewall that clients then connect to. The IP address of my Edimax Access Point is 192.168..253 and the IP of the Blue interface (its default gatewa...

jlct021

Hi Is the range of an Access point (in this case the bellow setup) determined by the WIFI card I install in the PC or by the antenna? I plan to install RouterOS on an old PC (400mhz cpu, 128MB RAM, 2 x USB, 5x LAN) Reason being that if I were to purchase a RouterBoard with all the above Id pay a lot...

Search found 68 matches