I've written the mangle above. And this is my queue tree. /queue tree add burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=0 \ max-limit=10M name=Total-Download packet-mark="" parent=ether4-lan \ priority=8 add burst-limit=0 burst-threshold=0 burst-time=0s disabled=no lim...

bump !!!

bump

hello, I have these screenshots. http://i48.tinypic.com/28168a0.jpg http://i49.tinypic.com/fcr7kn.jpg The Ping destination are : 8.8.8.8 (google dns), 202.162.207.111(game), 192.168.172.1 (modem) I have game and browse queues. And have static bandwidth of 3Mbps When the ping of the game(202.162.207....

It's weird...
have you disabled all of your firewall filter then pinged to 8.8.8.8 or www.google.com from the client or router?

maybe it's the dns..

have the pppoe-client connected to your isp? you can see in /log

try to ping the internet such as google.com from interface pppoe-kpn
then try to ping the internet again from all the lan interface one by one, bridge-zakelijk, bridge-prive, and so on.


then tell your result.

It must have gateway of course or else it wouldn't know where to pass the data. Also, make sure that your mikrotik is reachable from the web server and vice versa. Please provide your /ip firewall nat print output if you don't mind. oh I see. Now I know why I cant access my web server from internet...

I've tried that, the nat configuration. And change the www service to port 81.

Still, I cant access my web server from internet.


Is it ok if I dont put any gateway address on my web server machine?

hello...

I have problem

this is my network :
internet ----- (pppoe-client) mikrotik (lan) ------ webserver and client

I tried using nat, but when I try access my internet address (not from my network), it keeps access the mikrotik web not my web server.


Any idea?
what is the config in nat?

can you show the config


/interface pppoe-client export
*hide the user and password
/ip firewall nat
/ip firewall mangle

as in http://wiki.mikrotik.com/wiki/Manual:Queue_Size

I wonder to know how to implement the 100% Scheduler which is queue-size=unlimited? and the kind to use it?

hello...

I want to print a queue tree with 2 conditional, any idea?


Thanks

bump...

yups, I've seen it...

but it seems to block, in this case I want to limit the bandwidth..

can someone tell me about this wiki...
http://wiki.mikrotik.com/wiki/Block_Dow ... load_Sizes


I'm confused about the number given 1970000-0
What it means?
I checked on google byte converter the number is equal to 1.8787384033 MB

how about to block after 50MB?

That doesn't make sense. 10MB over how much time? Let's say that over the course of 3 months, I download a total of 10MB. So, then you are going to limit my bandwidth to 128k for 1 hour because I downloaded 10MB in 3 months??? You either need to rethink this, or add some better details. no.. no... ...

hello, I'm using queue tree... I want to automate limit bandwidth for download based on size... in this case, I set every user max limit to 2M.. if a user have downloaded 10MB, the max limit will set to 128k for 1 hour... after 1 hour, the max limit of that user will set back to 2M... any idea? if s...

It does not matter, they are completely separate. You can change the view to see them mixed together, but that is just the view. You should change the view to ONLY show either input or forward at one time. That setting is in the upper right. Sent from my DROID4 using Tapatalk 2 oh I see... tq so mu...

oh, ok... this is my bad... I just get problem when opening yahoo pages and some others... the pages load slowly or even worst wont load at all... the ping is the same when I connect pc to adsl router.. I just made a fix, I made the order in the mangle of CHANGE MSS to the top... it's dynamic that a...

FORWARD chain is completely separate from INPUT. in the upper right, change to forward instead of all.

sry, I dont get you...

You meant the order of the filter rule, right?
Where should I put the FORWARD chain? after or before the INPUT chain?

According to this Mikrotik Wiki page... http://wiki.mikrotik.com/wiki/Securing_your_router / ip firewall filter add chain=input connection-state=established comment="Accept established connections" add chain=input connection-state=related comment="Accept related connections" add...

According to this Mikrotik Wiki page... http://wiki.mikrotik.com/wiki/Securing_your_router / ip firewall filter add chain=input connection-state=established comment="Accept established connections" add chain=input connection-state=related comment="Accept related connections" add ...

sry, which router do you mean?

the mikrotik or adsl router one?

first, I'm sorry for my bad english... I just make a PPPoE client config here's my network thopology internet | | modem (bridge) 192.168.1.1 | | mikrotik 192.168.1.2 / 192.168.10.1 | | pc's 192.168.10.0/26 here's the configs: interfaces -> pppoe client add ac-name="" add-default-route=yes ...