hello
i would love to create a 6RD relay or a 6In4 relay for an existing network using RouterOs
anyone know how to create it using RouterOs?
thank you

too bad
quicklive=yes should do the trick
you have it on but same problem.

Code: Select all

[admin@MikroTik] /routing igmp-proxy> pri
              quick-leave: yes
           query-interval: 2m10s
  query-response-interval: 10s

Hey Ropeba ? Would you mind doing the following: /routing igmpproxy print and past the result there ? Thank you We are on a big project, making IPTV service for our clients based on Mikrotik RBs. Total project includes about 80 streams, 250 RB800 (one on every building), 2000+ clients Scenario: 1 IP...

Hello all,
i want to run a Adhoc link with My RouterOs runing on alix board and other runing on OpenWRT
any suggestion ?
thank you all for your help

Hello, i do have the following setup: a RB750G connected to the internet on ether1 a alix board runing RouterOs 5.7 on ether3 of RB750G and a Linksys WRT160nl connected to the alix board ok, here we go: i do have a Multicasting box runing Debian6 on port 4 (ether4) of my RB750G i configured my 750G ...

Hello i installed RouterOs5.6 latest through netinstall to my compact flash i plugged it into alix board and watched the console the admin prompt apire i entred: user: admin pass: empty press enter got the license notice then: Please press "Enter" to continue! i keep pressing enter but not...

hey,
take a look as Mesh Potato
http://www.villagetelco.org
linksys is silly.
Thank you

Super Usefull reply. i have it now fully functional now thank you for letting me stream my favourite Radio program on my iPhone today! >:) When you enable the hotspot, it also enables the 1:1 NAT. It translates all addresses outside its address pool to one on its localnet. To see what it is doing: /...

sory but your both hotspot is insame routerboard so that's an internal routing my hotspot is in rb750 but i have a wireless ap wrt160nl for wireless access but aditionaly i have a d-link dir615 that's a client of my wrt160nl if the d-link connect they do have a wlan and a lan interface the wlan inte...

hey friends, i have a RB750 with an access point atached to it i enabled hotspot and is perfectly working with local users ok, i decided to plug another access point but wirelessly to the other existing access point for wiring something remotly i enabled routing for remote subnet my actual RB750 sub...

i *DOOBT* this: i was having a NetScreen ipSec vpn client they are crap. locked up my ipv6 stack when i removed the network driver ipv6 is back to life thank you! :D Why would you suspect a routing loop? The first thing to check if your PC got a SLAAC address and default route, and whether the PC ca...

that worked perfectly using dstnat chain
thank you for your reply.

You need to reroute specific traffic over pptp, for example
/ip route add dst-address=80.249.74.0/24 gateway=cisco

hello guys i have a he.net tunnel i can ping HE from my router but can't from my pc i guess i have a routing loop here's my config: /interface 6to4 add comment="Hurricane Electric IPv6 Tunnel Broker" disabled=no \ local-address=41.200.4.244 mtu=1280 name=sit1 remote-address=216.66.84.42 /i...

hello buddys,
i want to do 6to4 through my pppoe wan interface
btw my address is dynamic
how can i get my ipv6 address automated?
can we add a setting to routerOs next release to automate the creation of 6to4 address's?
thank you too much.

hello guys
can someone please show me how do i set up cisco IOS for l2tp server and RouterOs for l2tp client and bridging?
thank you all for your help.

hey buddy
i have same hell issue today
i was bridging 2 networks through pptp
L2tp is not easy to set up
so i created a ppp profile and set the bridge to my bridge
bridged a ethernet interface of my RouterBoard
but if my pptp client come up i don't see the bridge port dynamicaly created
thank you

sory but i asked for RouterOs
if i want openWRT i could install it in my RB.
but RouterOs is my right choice
and MT is responcible for feature handling, let see if they will allow it or deny, that not a problem we are a community.
thank you

hello MT team, i would by glad to suggest adding / porting the following features to RouterOs N2N vpn service: N2N is a very good P2P vpn networking tunnel good for enterprises/ remote workers SER (sip express router) ser is a small and versatil sip server / proxy will by good if you add it as a pac...

hi friends, now i have my RB750G connected to my remote cisco router through pptp cisco can ping mt, mt can ping cisco. now what i need is to nat my subnet through the pptp outgoing interface but not all the time, is a conditional nat for example, if i want to access this subnet: 80.249.74.0/24 shou...

hey guys
just detected that gre need both endpoints to by static ip
cisco have a static ip, while mikrotik is dynamic
so what do you suggest guys
any example would by welcomed
thanks.

hi guys
i just got a rb750G that's very cool!
i wonder what kind of tunnel i can create to a cisco 2851 router
gre... not sure, cause mt ip is dynamic
any clue?
thank you