Hi, i have MT RB150, 2 computers connected to 2 eth ports. First have IP 192.168.1.2, second 192.168.2.2. Copying files between computers is very slow, about 2-5Mbits/sec. I have queue, mangle and so on. Where could be the problem? Even if i download from internet some files, it is much faster (5Mbi...

first simplify your network in normal scenario...you will be using pppoe for your dsl(yur router dialing pppoe), configure your dsl router in bridge mode n let MT dial your pppoe to dsl...this way you will have 83.* ip on your MT..then use single NAT on MT n see results. regards, Asad good idea! ha...

Flags: X - disabled, I - invalid, D - dynamic 0 chain=srcnat out-interface=INET action=masquerade 1 ;;; SMTP local NAT chain=dstnat in-interface=LAN src-address=10.0.0.0/24 dst-address=83.69.x.y protocol=tcp dst-port=25 action=dst-nat to-addresses=10.0.0.2 to-ports=25 2 ;;; SMTP PUBLIC NAT chain=dst...

Hello, i would like to ask u, having 3Mbit/384kbit network, about 40 PCs (usually 10 active). I would like to guarantee network bandwidth for VoIP telephones. What do u suggest? My idea: on mangle mark packet for IP telephones, give them some priority and no download/upload limit on queue tree. Then...

Scenario: Ive windows server 2003 with exchange, IP: 10.0.0.2. My gateway is Mikrotik 2.9, LAN IP 10.0.0.1, WAN IP 192.168.0.1. Next to mikrotik is DSL router with IP 192.168.0.254 and public ip 83.69.x.y. (server-mikrotik-dsl router-internet) I NAT port 25 on dsl router (incoming 83.69.x.y to 192.1...

Eugene, do u have an ICQ? i would like to ask u for something ... (my is 108065574)

Hello, I have an Public IP (83.69.32.x) and local IP 192.168.1.x. I received from ISP another public IP adress (83.69.35.x) which is routed via my Public IP and i need route this IP to PC on LAN. How to do this? ISP=>PUBLIC IP 83.69.32.x=INET INTERFACE Mikrotik 192.168.1.1=LOCAL INTERFACE => LAN LOC...

Possible virus attack? :P
check it with nod32 (http://www.nod32.com)