MikroTik

davizo70

I will explain what I did: Say, one group has ip address 10.0.20.0/24. for this group, configuration looks like this: chain=prerouting action=mark-routing new-routing-mark=10.0.20.0/24 passthrough=no src-address=10.0.20.0/24 chain=srcnat action=src-nat to-addresses=146.255.243.XX src-address=10.0.20...

davizo70

Hello all, We have 2 routers-A and B, connected to each other. Router A is the main one, where we had 1 global IP address released by ISP. Before long, we received 5 additional global IPs from the ISP and we want to group our customers behind router B to use them. We devided them in 3 groups but we ...

davizo70

Thanks,
I think I will use 1 to 1 NAT as I am more familiar with it.

davizo70

Hello, my network topology looks like this: ISP-RouterA-routerB-Sector Antennas. On both routers I use NAT. The ISP has given me 1 global IP address. But as the number of my custommers on sectors have grown, I asked the ISP to give me more IP adddresses and they agreed. I plan to remove NAT on rout...

davizo70

Hello,
is it possible to make mikrotik router restart if it fails to ping its gateway?

davizo70

ipip tunnel was just my choice. The connection between these routers is public.

davizo70

Hello all. I have 2 mikrotik routers in different regions, router A and 1/router B. there are many customers behind each router. I have better global internet traffic at router A. So, I decided to allow router B users use router A as their global internet gateway. Here is what I did: 1. Created ipip...

davizo70

Thanks a lot.

davizo70

Read mikrotik wiki :D or give more information :) What is the customers client? MT or TP-link etc. Where would you do the forwarding? In your gateway, or in the customers client? Port forward example: /ip firewall nat add chain=dst-nat dst-address=x.x.x.x (external address) protocol=tcp (tcp/udp or...

davizo70

Hello,
I am new ISP operator. Yesterday one of my custommers, which has an IP address 10.0.30.50/24 asked me to do a port forwarding. The port number is 5992. My topology is: External address-> MT1-> MT2-> custommer. What can I do?

davizo70

Hello,
I have 2 MT with 4 ubiquiti antennas between them configured in bridge mode. I would like to test traffic speed. Can you please let me know if Ping test and Bandwidth testgive me the results?

davizo70

Hello,
I am accessing to my MT via winbox. Yesterday I noticed that someone had many attempts to log on the MT, but in vain, as he did not guess password. Could you please advise me how prevent access via HTTP completely and allow only winbox from only my place?

davizo70

With priority assighnment, you can define which traffic will be executed first.

davizo70

I think this question has the following solution: Just create simple queue 1 with priority 8, assighn to it P2P traffic; Create simple queue 2 with priority 7, assighn to it marked packets that represent port 21(FTP). All other traffic will go with the highest priority.

davizo70

Hello, I'd like to Assighn different priorities to different services ro allow light users faster traffic and to make heavy users stay just after them. P2P traffic must be satisfied the last . Say, I have 10 custommers. I want to assighn priority 8 to P2P, priority 7 to file downloading and the hies...

davizo70

Could you please suggest me what causes traffic decrease in the evenings then? The topology: ADSL-MT-Airmax antenna with 2.4 Rocket-10 custommers. Bandwidth test shows 22 MB agregate. In MT I have two somple queues-1 for Global and the other for Local traffic. PCQ rate is 1.5 Mb/sec for download and...

davizo70

Thanks, but this topic is not discussed in any manual I;ve seen. And I became not completely clear what the real picture is.

davizo70

Helo, My custommers comlain internet speed decrease in the evenings. I have MT using PCQ rules, equalizing traffic among users. This feature is good, but it has some falts in my point of view. I will explain what impact this feature has on the traffis decrease and you consider if I am right. Say, We...

davizo70

Hello,
I have two Internet providers. Provider A gives 10 Mb local traffic, provider B gives 10 Mb local and 1 Mb global traffic. I would like to do a routing so, that all local traffic go to provider B, but global traffic to be devided among these providers. Can you advise me anything?

davizo70

Hello,
What is the easiest way to Export or import MT configuration file to or from PC? Is it possible to do it using winbox?

davizo70

Sorry, whai is a que of PCQ type? Does it affect all users together or separatelly? I have one suggestion, and please express your opinion. I mangle connection from my users, but with "passthrough=no"; Then I marke pakets of this connection with "passthrough=yes". In simple queue...

davizo70

Hello guis,
I have 50 custommers. I would like to give 1Mb max limit and 512 Kb min. limit for each custommer. PCQ allows only max limit. What is the best way to do rhis?

davizo70

I am not completely clear what master port means. Can anybody explain me the meaning? Also, I have MT router with 1 public interface and 2 interfaces with two clients connected to them. I want to create a quewe with pcq-s in it for traffic shaping, but I do not know which parrent to choose. I tried ...

davizo70

Is Simple queue 2 for Client3 necessary?

davizo70

Hello everibody, I have MT 750. The topology: Ether1-Public interface; Ether2-Client1; Ether3-Clients 1 and 2 with different IP addresses. My purpose is to give to: Client1 -from 2 to 4 Mb/sec, Client2-from 2 to 4 Mb/sec, Client3-unlimitted. How can I reach this? My opinion looks like this: Simple q...

davizo70

Is it possible to undo last changes inMT router? in CISCO, you can print "no" before last script or, if necessary, reboot the router not saving the configuration. I think this is practical, as when someone makes a mistake thus resulting traffic stopping one can recover his mistake using th...

davizo70

Is it possible to block a particular site using Microtik? How can it be done?

davizo70

I was told that airmax antennas use 30% more resources in WDS mode. is this true?

davizo70

Thank you both,
I will try to see these explanations in practical examples for better understanding. In case I have more question, I will ask again.

davizo70

My topology looks like this: User-user antenna(in router mode)-Sector antenna(in bridge mode)-MCrouter. Is it possible to fix user PC to MC so that the user will not able to connect another PC to the antenna?

davizo70

Hello,
Could you please explain me some topics, or link me the manual with definition, what is the meaning of the "Passthrough=yes, passthrough=no" in the firewall mangle?

davizo70

There are at least a couple ways. One way is set the dhcp server to use a RADIUS server to assign ip addresses. The mac address is used as the username in the RADIUS server. Return "Framed-IP-Address" set to the ip you want that client mac to have, or "Framed-Pool" to use a diff...

davizo70

Hello, I need to connect more than two users to the LOCO M2 antennas. The LOCO M2 is configured as a bridge. How can I bind their PCs using Microtik router, so that they were unable to change to other PCs or not to add additional PCs without my permition? How can I give different users diffrent traf...

davizo70

no traffic will not divide between them

Does it means that, until the file download completes, the first user will keep its 5 MB/Sec speed and only the rest 1 MB/Sec will be allocated to the second user?

davizo70

Hello, My name is David. I have just started internet service to custommers using routerboard 750 and wriless antennas. As I am new in this subject, I need some help in some topics. At this time internet trafic bandwidth is 6 MB. I am picking custommers every day. I have desided not to limit speed f...

Search found 35 matches

Re: Manage several IPs

Manage several IPs

Re: Change NAT

Change NAT

Automatically restart router

Re: Devide global and locsl traffic

Devide global and locsl traffic

Re: Port forwarding

Re: Port forwarding

Port forwarding

Ping speed ans bandwidth test

How restrikt eccess to MT

Re: Assighn priorities

Re: Assighn priorities

Assighn priorities

Re: PCQ fault?

Re: PCQ fault?

PCQ fault?

Load balancing

Export/Import configuration file

Re: Internet speed limit

Re: Internet speed limit

Parrent and Master port

Re: Trafik shaping among 3 users

Trafik shaping among 3 users

Undo changes

\block sites

Airmax WDS mode

Re: "Passthrough=yes, passthrough=no"

Re: DHCP lease and binding

"Passthrough=yes, passthrough=no"

Re: DHCP lease and binding

DHCP lease and binding

Re: Internet speed limit

Internet speed limit