MikroTik

salytwo

I have the same problem, downloading is fast while browsing is slow.
I did remove all queues and make it very basic setup. like hotspot with IP binding (80 clients) one rule as NAT.

but the speed of browsing is slow.

can anyone help please

salytwo

Did anyone try the above rules?

salytwo

I have all my pc is bypassed in IP bind. I do not use walled gardian ip.
just anyone not listed in IP bind will have loging page. also I did DHCL make static ip to them.

but the problem is still every morning I have to disable and enable the hotspot

salytwo

Dears, I have same problem occur everyday with MT 5.21 x86. when I disable and enable hotspot everything go right. Can you help me write some script to enable and disable this hotspot everyday morning? so I can try resolve this error permanently later. one hint: when I keep my win xp with winbox run...

salytwo

Ok, aacable.

I am going to install one big WISP. we will be in touch after designing it.

salytwo

can u tell what software u used in that deployed scenario?

salytwo

Dear aacable,

Can you mention the OS's needed and all software that can help.

also as my understand the main authentication server need public IP right ?

Did u hear about any such this tech. already deployed?

thank you for ur cooperation.

salytwo

Dears, I have big municipal wifi project and I want to minimize the cost of back-hole PTP links that connects the villages. so I want to exploit the existence of ADSL in many places of the region I will cover by this project. I want to setup mikrotik and its userman to manage users but I want it to ...

salytwo

Dear aacable,
Where I can find the limitation of such boards I mean number of users of any boards that can be handled, the data rate that can be achieved, Do they have some static information of their boards capability, we want to build our customization on these static info.

Thanks a lot

salytwo

I obtained that MT is not for files server usages, I was trying to use it as file server however it is not

thanks

salytwo

hi,
I am facing this problem also, installation on SATA drives not working, please help..

salytwo

I have SATA hard in regular machine (HP dc7900) the same error raised can any one help please
waiting....

salytwo

LoL dears where are you? Any Suggestions ?

salytwo

also me I am facing such problem right these days.
also my active tab in hotspot is blank

can any one refer me ?

thanks

salytwo

Dears, I have MK 5.21 x86 and I setup userman with my hotspot but I am facing that active tab of my hotspot in blank nobody listed while hosts tab is list computers working and downloading. the second problem I have is some mobiles not displaying my hotspot page while they are connected and get IP f...

salytwo

I setup hotspot and userman but I am facing that the majority of mobiles can not access the page, while they get IP and they are connected?

my hotspot page is gif picture so can any one suggest the reason ?

Thank you

salytwo

I am trying to access userman page while my hotspot enabled but I found Error 404: not found, when I deactivate userman I can access userman page, so I tried walled gardian but not successful, Can u explain more in details?

Thanks

salytwo

PPPOE connection I know it but still need why bridge mode and how to configure it ?

Thank you very much

salytwo

Where are the experiences in this field ?

salytwo

Dears,
I have modems of Evdo and I want to use it as Internet gateway or load-balance many of them.

Models:
huawei ec 156 and ZTE AC 2746

Which version support them fully ?
How to configure MK to dial it ?

Thanks

salytwo

Hello, I have MK 3.3 and I am using windows explorer to access it but its not working or I could not log on except using full privilege user or when I upgrade my current user to be full access. Now I want MK 3.3 to be file server for my small local network and I want my users to logon using read pri...

salytwo

Hello dears,
How I can make surveillance setup for my WISP using google map or something similar?
this action will help to mount the antenna truly.

thanks

salytwo

Thank you mramos I hope you fine and doing well,
If I have clear line of site and 24 dbi grid antenna with 23 dbm output power using 2.4 Ghz unlicensed. I will be able to transmit at least 10 MB or not?

If I use 5.8 Ghz can I get 10 MB or still not?

thanks a gain

salytwo

Can you tell me what do you mean by 1m clearance?
I understood that I have to add the objects reside in line of side eclipse like tree or some unequal earth
Am I right?

thanks

salytwo

Mounting a 24 dbi grid (2.4 G Hz) on a house building height (8 Meter) and the second 24 dbi antenna on the same height with 14 KM far away (Distance between both antennas) but no obstacle between them.behind these antenna I have 26 dbm transmit power wireless router.so can I have 26 MB or above ba...

salytwo

Mr. mramos I have to construct a wisp but I am not sure of the following: 1- Mounting a 24 dbi grid (2.4 G Hz) on a house building height (8 Meter) and the second 24 dbi antenna on the same height with 14 KM far away (Distance between both antennas) but no obstacle between them. behind these antenna...

salytwo

Mr. mramos

Why you did not mount the antenna in considerable height?
How far your second antenna?

thanks

salytwo

Hello all,
I need to customize this page. Can I do this?
thanks

salytwo

I used this code in MT 3.3 but its not fail-over as mentioned.
I do not know how can I troubleshoot this code
can you help plz?

salytwo

what you think about PCC code is it applicable on MT5.7 or need a change?

salytwo

I have the following code to load balance 2 adsl lines ran on mikrotik 3.3 but it is not working on MT 5.7? the Code: /ip address add address=192.168.1.21/24 broadcast=192.168.1.255 comment="" disabled=no interface=wlan1 network=192.168.1.0 add address=192.168.2.21/24 broadcast=192.168.2.2...

salytwo

Hello all, I installed win server 2003 enterprise edition on host with 1800 Ghz, 256 Ram, 40 Gb HD. then I installed Isa server on that host after that I installed Vmware version 7, Finally I make a guest on that Vmware which is MK 5.7. But when I try to power on this guest Mk 5.7 I get error say: n...

salytwo

I have 5.7 running on Vmware still winbox exit without reason.
it give me around 45 second and exit permentally and it refuse to reconnect until I restart MK

thanks

salytwo

Can you mention an example of Voip server or service which is able to work with MK.

thanks

salytwo

I'd like to know how mikrotik can serve me in VOIP tech.
Can I use MK to coordinate calls in wifi feild?

thanks bro

salytwo

Hello all, I'd like to eploit wi-fi network by using mikrotik to establish free call to our employees in wifi coverage area. more: In our campus's we use radio fron senao or some else to call each other but I'd like to make this using Mikrotik and VOIP tech. How does Mikrotik can help me to do this?...

salytwo

thanks pro ...
I will start to have clear look of these devices you specifeid and feedback if there is a problem

salytwo

Hello again,

Just refer me and I will complete the chain I am interested in searching details

salytwo

Hello all, I am new to wireless field and I face 3 scenarios 20 Km, 14 Km and 5 Km. so Can anyone mention hardware I need to make WISP in three areas I draw it in the attached PDF file below. or just mention names of hardware and I will search for that to get more info then I will ask this great for...

salytwo

Can you tell me how I can start 20 Km wireless project using mikrotik instrumentation Plz I am in hurry
thanks

salytwo

I feel it will be possible if we use mangle to mark every extension and then using NAT to route it to specific gateway

salytwo

Where are the professionals?

salytwo

Hello all, In some circumstances I found my self need to route files downloads to specific gateway whereas browsing the internet to both gateways how I can alter the following PCC code: /ip address add address=192.168.1.21/24 broadcast=192.168.1.255 comment="" disabled=no interface=wlan1 n...

salytwo

I want to allow direct play video and deny download it ?
Sorry I have to explain to you which one.

salytwo

salytwo

but regard separating video downloading and playing directly?

salytwo

Currently I use this: ^.*get.+\.zip.*$ but also the following failed to catch such mentioned above urls: "^.*get.+\\.zip.*\$" Second when I browse any website had a video clip with ext like .flv, I can not paly this clip because of L7 pro. How I can differentiate between downloading files ...

salytwo

I have blocked .zip files extensions but when I download from such this URL:http://www.1sa1.net/1sa1/1sa1/1sa1/download/file.php?id=758&sid=ec6a647fe397aaadd6455dd7d5337536 MK could not catch this .zip file. I think there is no "zip" word mention in the URL above? how I can work around...

salytwo

Thanks Mr. Feklar. I am going to install it in our company.

salytwo

I forget to tell you that this scenario will be deployed in an internet cafe, my machine will be like :2000 core 2 due , 2 Giga ram, 80 G hd.
is this hardware enough for PCC method and queue tree download for 32 Pc's?

Sorry if I bothered you...

salytwo

Thanks Mr. Normis
But regard the following question:
What if I install MK on virtual machine then route 36 pc to this machine. Is this scenario correct?
I mean make MK as a guest on XP pro then make this as gateway
I hope my words understood

salytwo

If you using PCQ tree you have to change the 50/2000 which is default to your need.

salytwo

Load balancing can double the speed of browsing the internet because each browser open multiple connections to get items of pages quickly Am I right? Can I have links to MLPPP and end to end bonding over private links.? What if I install MK on virtual machine then route 36 pc to this machine. Is thi...

salytwo

Hello all, I am going to install Mikrotik OS version 4 or above on virtual machine on Win xp plate-form with hardware like: Core 2 due 2000 GHz processor, 2 GB Ram , and 80 GB Hard disk. I want this device to serve around 32 PC on Internet Cafe. Regard services might used: Load balance 2 Wan (PCC me...

salytwo

Thanks bro's

salytwo

Hi Fewi,

Can you specify that version? Is it 3.3?

Thanks alot.

salytwo

Hello all,

I have users using proxy programs to open blocked websites I have denied it.

How I can block their traffic?

thanks

salytwo

Hello all, I have 3.2 OS running hotspot but when power goes down then get back my hotspot not respond with login page until I enabled and disabled via winbox. This is the configuration: [admin@MikroTik] /ip hotspot> print Flags: X - disabled, I - invalid, S - HTTPS # NAME INTERFACE ADDRESS-POOL PRO...

salytwo

Hello all, It will be very very great idea to IT administrators these days to report how much facebook , youtube and etc. traffic is passing to local networks. so please co-operate to help each visitor to this post to accomplish this great task. Note:I need this traffic to be saved for a month to be...

salytwo

yahoo port is an example only while I want to deny all traffic except what I know.

salytwo

Hello all, I used all commands in this link: http://wiki.mikrotik.com/wiki/Protecting_your_customers but still yahoo messenger running as well as some other ports. I need to block all traffic except what I allowed explicitly. Extra info: I running 3.2 with hotspot configured. These are my rules: Fla...

salytwo

these are the rules [queue tree] [admin@MikroTik] /queue tree> print Flags: X - disabled, I - invalid 0 name="youtube" parent=global-out packet-mark=youtube limit-at=0 queue=default-small priority=8 max-limit=1000 burst-limit=0 burst-threshold=0 burst-time=0s 1 name="zip file" pa...

salytwo

Hello all,

You know what Mikrotik capability of blocking ports. but I have hotspot configured so when I add drop rules in filter it became unusable or has no effect. so how can I associate it with hotspot?
second frustrating thing is webproxy hit counters. its not saved?

thanks bros.

salytwo

I have these queue tree [admin@MikroTik] /queue tree> print Flags: X - disabled, I - invalid 0 name="youtube" parent=global-out packet-mark=youtube limit-at=0 queue=default-small priority=8 max-limit=1000 burst-limit=0 burst-threshold=0 burst-time=0s 1 name="zip file" parent=glob...

salytwo

Hello all,

I have setup hotspot and queue tree but I have extensions exe and dat not stop downloading and no user is download such these file type I am sure.
I feel that a virus or my network have hacked so can I block malicious thread by mikrotik?

I running 3.2

thanks

salytwo

Hi dear, that is: admin@MikroTik] /ip hotspot> print Flags: X - disabled, I - invalid, S - HTTPS # NAME INTERFACE ADDRESS-POOL PROFILE IDLE-TIMEOUT 0 hotspot1 LAN dhcp_pool1 default 1m [admin@MikroTik] /ip hotspot profile> print Flags: * - default 0 * name="default" hotspot-address=0.0.0.0...

salytwo

Dear SurferTim, My hotspot did not work until I used none dhcp pool and default profile and default server profile. but now I faced multiple issues listed below: 1- I am not able to do limit download some files extensions either via queue tree or simple tree. 2- setup web proxy also not worked. 3- t...

salytwo

Hello all, I have around 15 users in my hotspot its working good but when we leave it at off duty our starts at 6:00 pm TO 8:00 am it became inaccessible I mean the login page not showing and the browser still looking up. I can get it back to work when I shutdown the server and disable the hotspot. ...

salytwo

hello all,

during discussion of this thread I need to know How I can enable hotspot and queue tree at same time??
I am able to do hotspot alone and queue tree alone but both of them I can not.

thanx

salytwo

Can you notify me with help of my pic attached and code below [admin@MikroTik] /ip hotspot> print Flags: X - disabled, I - invalid, S - HTTPS # NAME INTERFACE ADDRESS-POOL PROFILE IDLE-TIMEOUT 0 hotspot1 LAN dhcp_pool1 default 2m [admin@MikroTik] /ip hotspot profile> print Flags: * - default 0 * nam...

salytwo

hi all

How I can limit download some file extensions like: avi, exe etc.
second How can I enable three things : web proxy, hotspot, limiting of download?

I will be thankful for help

Best Regards

salytwo

I will. regard login page: This is the source code of the page you request from me that is because the problem is took the way to me back: <html> <!-- <?xml version="1.0" encoding="UTF-8"?> <WISPAccessGatewayParam xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xs...

salytwo

I need to block some extesions like avi and ohter it possible to use queue tree or only possible for simple tree?

salytwo

Hello Bro,

I reset my system now I can login without problem but when add layer 7 and mangle to limit download the counter of PCQ in Queue tree not count any thing I think this because of hotspot is enabled.

Am I right?

thanks bro

salytwo

My hotspot make me active but I can not go any where with my browser because its rapidly unstable it like some key in the keyboard still pressed. I enabled what you told me but I had power switched off in my city so all debugging info erased. and now I can not try hotspot because I need internet run...

salytwo

I deleted all hotspot entries and start from scratch but same thing after entering login the page still refreshed in quick manner it make the browser like crazy.
I think a L7 rules has an effect.

this hotspot make my eyes surrounded by black ring

tnx

salytwo

I logged this users but now I can not I did not remembered what I did that deny access to login page I can decide that you do not observe any fault with hotspot so I can move to review any related topic like firewall or nat did you think I am right? Really I am appreciate your co-operating thanks bro

salytwo

here you are [admin@MikroTik] /ip hotspot user>> print Flags: X - disabled, D - dynamic # SERVER NAME ADDRESS PROFILE UPTIME 0 hotspot1 admin default 8m13s 1 hotspot1 salim userprofile 45m12s 2 hotspot1 salim2 userprofile 6h28m11s 3 hotspot1 abdurrahm... userprofile 0s 4 hotspot1 ali.alzub... userpr...

salytwo

I tried removing DNS name and set IP of my local interface but no benefit.
I named local interface as LAN and public interface as WAN I thinks naming has no effect.

salytwo

Dear SurferTim

I am using hotspot without webproxy I disabled web proxy and its cache to get L7 rules works. but I faced this problem of login page.

Plz see the attache pic and guide me to correct this trouble if you need more details I will hand it to you

thanks

salytwo

When I tried ip of google 72.125.130.148, the login page still load for long time with waiting for google.com at the status bar. The IP above guide you to google page if place it in the address bar. My DNS setting is correct I mean hear public DNS not local DNS I have no local DNS running in my netw...

salytwo

The URL I gave is not real not existed however Should I give it an existed website?
I think using 192.168.1.1 is enough Am I correct?
when disabling hotspot then use the ip 192.168.1.1 at the browser I get the mikrotik documentation

tnx

salytwo

Hi SurferTim I used www.almasila2.com then I changed to www.gg.com. All previous URL with 192.168.1.1. after that I removed all URL and leave only IP of hotspot server which is 192.168.1.1 but not benefit. I reset HTML because I thought it is from my altered login page but still same problem however...

salytwo

I setup hotspot successfully but if I entered correct user name and password in login page it going to refreshed in very quick manner it let my browser crazy. I think it is redirected problem because if wrong user info was entered it give you correct feedback. I deleted and created the hotspot many ...

salytwo

I am using windows command prompt . regard redirecting I put IP of my LAN interface 192.168.1.1. it supposed to be unreachable until logged on. [admin@MikroTik] /ip hotspot> print Flags: X - disabled, I - invalid, S - HTTPS 0 X name="hotspot1" interface=LAN address-pool=dhcp_pool1 profile=...

salytwo

I tried this rule also but it not working properly.

My question: Is bit torrent traffic same as utorrent traffic?

thanks

salytwo

Hello all,

I setup hotspot with just 15 users then its normal to see destination unreachable in command prompt but unfortunately I get request timeout right now I could not recognize why?
Really I became very tired to debug such this error alone plz suggest me a hint.

thank you

salytwo

Hello Mr. Felklar I forget to mention that I am using PC P4, CPU 1800, Ram 256, 40 Hard disk. then in first point you mean that it is better to separate proxy in another mikrotik machine other main mikrotik. I have only 15 users maximum so I see one machine is enough Am I right? about secured HTTP i...

salytwo

hello all, I am very happy to be one member of this great forum. First I have instructed to block such mp3, mov .........etc. not limit just block the entire download of these kinds of files. I did limit using queue tree and pcq but How to block it at all. Second When I enabled Proxy the pcq queue b...

Search found 89 matches