MikroTik

smileymattj

Would be really nice if we also get genuine mac-telnet text mode application from Mikrotik... Second this There has been progress with the community version. It's back working now. But not being directly from MikroTik, it's subject to breaking without notice at anytime, and no ETA on fix. Not the c...

smileymattj

Thanks for WinBox 4. Praises: - Dark Mode - YaY - Global Inline / hide password settings - Resources default to being displayed (old versions you had to add each individual piece) - Tabbed view is back :) Some suggestions: - Could you add Router architecture and version back to title bar? I see it a...

smileymattj

Try setting channel width to 20 MHz. And skip DFS setting shouldn’t even apply to 2.4. Remove if possible (just for a cleaner looking config). If you can’t, no big deal, it won’t have any affect for 2.4. DFS is 5 GHz.

smileymattj

Could you add a terminal feature to the MikroTik mobile app. Like WebFig & WinBox has.

smileymattj

I forgot about device mode. It doesn't fully cover everything packages did. It also doesn't fully disable services. It protects config changes to the specified features. If it's not possible to disable packages due to new way of doing things in v7; it would be nice if MikroTik expands on device-mode...

smileymattj

Will v7 get the ability to disable packages again like v6 had? I know the option to hide it through skins exists. But there are several reasons why disabling can be more beneficial to some uses. Disabling packages is easier and faster to do than skinning. (subjective) Actually turning of services/da...

smileymattj

It would be nice to have a rackmount version of the netPower 16P. Also it would be nice to have a CRS3xx version of the CRS112-8P-4S-IN with 4x SFP+ ports. These would complement the existing CRS328-24P-4S+RM & CRS354-48P-4S+2Q+RM So you would have: CRS354-48P-4S+2Q+RM CRS328-24P-4S+RM CRS318-16...

smileymattj

I think I understand better why the flow looks like there is a loop. You want the MikroTik to use DoH right? You could add DoH to pihole. But yea out the box newer versions of MikroTik support it directly. I think pihole is still in development for DoH. So it’s a littler easier to use MikroTik for D...

smileymattj

First off, nice work pcunite. That's a lot of effort you put in and very well documented. Here is something I was thinking of. If you trust the DSCP markings applied by the devices on your network. Typically you can unless your devices are compromised. You could first check to see if the device is a...

smileymattj

normis or Reinis, Do you have a list of AC devices that will receive the MU-MIMO functionality when the driver is updated to support it? Will all MikroTik AC devices support it? Or certain ones? I'm ok with it not currently supporting it, but will in the future. Back when 802.11g came out, if you ha...

smileymattj

I have a fairly large disk space allocated to my dude server. I'm running on a CHR. I would like to keep as much data as possible for each data source. I was keeping raw data for up to 3 years, but when viewing in the scale of 365 days it would be too much data causing the chart not to be easily rea...

smileymattj

Quick correction. You don't need to install Xquartz anymore. Not sure when WinBottler stopped needing. Just old habit from when I first did it many years ago. It might be needed for certain applications as Wine still suggests it as an optional install it on their website. But for WinBox it's not nee...

smileymattj

This method retains the icon and creates a .app file for you. As well this way doesn't have the addresses.wbx import bug. I believe the 64 bit edits are because of a bug. So normally you wouldn't have to do that. Might eventually get fixed. Otherwise it would be a Next, Next, click based install.

smileymattj

https://www.youtube.com/watch?v=kCMmyk9wvso https://i.ytimg.com/vi/kCMmyk9wvso/hqdefault.jpg?sqp=-oaymwEZCPYBEIoBSFXyq4qpAwsIARUAAIhCGAFwAQ==&rs=AOn4CLDtWGcZ2KXFx64pUCAyq_M4luz01g Required Downloads https://www.mikrotik.com/download https://www.xquartz.org * No longer needed with newer versions...

smileymattj

When will the [long-term] receive the CVE fixes addressed in v6.45.1?

smileymattj

I purchased a hEX (RB750Gr3) router. The gigabit version, not the 100Mbps Lite version. I did know before hand it was 16MB, but didn't realize how tight it would be until using it. The routers I compared to buy were: RB750Gr3 (hEX) RB2011 RB3011 I would have much rather bought the 3011, but due to s...

smileymattj

I also see that some tools will use the device's agent as a proxy and some not. For example terminal executes directly to the device. Where if I create a custom winbox tool. It doesn't proxy the request through the dude agent. Which means I would need direct access to the device in order to execute ...

smileymattj

Also is there any way to get the cool winbox icon attached back to your custom tool? Instead of the generic window icon.

smileymattj

I was able to get this working on my Mac. However I feel there should be an easier way to do it than what I did. First I tried copying it directly into the app package contents. Which didn't work. Also for windows users like Bomber67. Place winbox.exe directly in the dude's program file directory. T...

smileymattj

Thanks,

I've tried 6.39 & 6.39.1 and got the same issue. I believe the recent SGI fix was related to CAPsMAN. This might be a separate issue. Or just an incompatibility. Not sure.

smileymattj

RB493G /w R52nM PCI card ROS v6.37.5 When using 2.4GHz on the R52nM radio I'm not able to get SGI speeds. If I change the R52nM radio to use 5GHz, SGI works. I'm using a Mac Mini /w Broadcom BCM43xx wireless 2.4/5GHz. Also my mAP lite has same issue when connecting to the RB493G + R52nM. However if ...

smileymattj

Outages Pane missing in Dude 6.34.3

6.34.3 on Left
3.6 on Right

BTW - great job on the new dude, really enjoy the new graph increments and slider.

smileymattj

After upgrading to 6.34.2 Traffic Flow stopped recording Rx. Tx worked fine.

I reverted back to 6.29. I didn't try any releases in-between.

I'm using WanGuard
https://www.andrisoft.com/software/wanguard

smileymattj

Watching one of my routers, I see ether1, ether2, ether3, & ether4 drop to nothing. Both in Tx & Rx for both Bytes and Packets. ether5, ether6, ether7 & ether8 don't experience this same drop. So my thought is this must be a bad switch chip? This is a brand new router. Should I try to RM...

smileymattj

First thing I do with every MikroTik I do is remove the default config and strip to no settings. It's not going to be doing a lot of routing. It will be a Single WAN connection coming into it at 10-20 Mbps down / 1-2 Mbps up. And it won't be constantly pegging that connection out. So I'm sure any co...

smileymattj

But from your explanation. It explains why the default config of a 2011 has both Master/Slave + Bridge configuration. I never understood what the benefit to doing both was for. Now I understand. Thanks.

smileymattj

Thanks, that helps get a better understanding. I'm not concerned about wire speed because the reasoning by sending it to the CPU is to block the traffic between them. So the speed between them should be none. I didn't setup Master or Slave ports. Everything you describe makes sense. I was getting L3...

smileymattj

I think I found the solution.

Use Split Horizon Bridging

http://wiki.mikrotik.com/wiki/Manual:MP ... n_bridging

smileymattj

Thanks. What I have is a bridge setup so that I can use the same IP scheme. This way if the guest user swaps to a different interface, they will switch seamlessly. So the bridge is what is causing the CRS to bypass the CPU? The other Routerboards like 450, 2011, 750, etc... I've always used bridge t...

smileymattj

Hi, I have a CRS125-24G, I'd like to pass several port's traffic to the CPU so that it does NOT get processed by the switch logic. If I can't do specific ports, doing all is fine too. I want to isolate these ports. But not in the method that port isolation works. Port isolation will send the traffic...

smileymattj

google is probably not the best example, since it returns multiple ips. It has many servers that can respond. I used msn because it returned one address. ping msn.com :put [/ip dns cache get value-name=address [find name="msn.com"]]; First ping the domain you wish to find. Then extract the...

smileymattj

Is the formatting of the print command using the print brief column command not supported any longer? https://www.mikrotik.com/documentation/manual_2.6/Basic/Console.html#zzee_link_7_1028289098 v 2.6 [admin@MikroTik] interface ethernet> print brief column=mtu,arp Flags: X - disabled, R - running # M...

smileymattj

Thanks. VPN is great idea, multiple users and services connect through these constantly. So not really ready to tackle training and tracking down everything that's using it to get it on a VPN. But something to think about implementing in the future. I didn't think IPv6 was fully developed across the...

smileymattj

I have approx. 250-300 Dst-Nat rules to monitor devices on my network from the outside. This network normally support no less than 2000+ users. I'm seeing approx. 8000 + connections on average. How does everyone else handle Port Forwarding. There are three ranges to choose from: Well Known : 0-1023 ...

smileymattj

It appears that the DHCP alerts can't use array variables. I can take the same script and copy it to /system scripts as a stand alone and it will run fine. If it point the DHCP alert to that same working script I created in /system scripts, it will not pull the values for the array variable. It also...

Search found 35 matches

Re: 📣 WinBox 4 is here 📣

Re: 📣 WinBox 4 is here 📣

Re: Wifi6 unusable on Archlinux

Feature Request - Mobile App - Terminal

Re: Disable Packages in RouterOS v7

Disable Packages in RouterOS v7

SW model/variant suggestions

Re: Mikrotik,pihole & unbound. [SOLVED]

Re: Using RouterOS to QoS your network - 2020 Edition

Re: 802.11ac Wave2 Support?

Feature Request - Use appropriate data set for graphs display date range selection

Re: HowTo: Install WinBox64 on macOS

Re: HowTo: Install WinBox64 on macOS

HowTo: Install WinBox64 on macOS

Re: v6.45.1 [stable] is released!

Re: hEX nand size ONLY 16MB !!!!

Re: Agent Behavior

Re: TOOL/WINBOX Disappeared from LIST

Re: TOOL/WINBOX Disappeared from LIST

Re: SGI not working

SGI not working

Dude Outages Pane Missing

Re: v6.34.2 [current] is released!

CCR1009 ether1-4 keeps dropping to 0 bytes / 0 packets

Re: CRS Pass packet to CPU

Re: CRS Pass packet to CPU

Re: CRS Pass packet to CPU

Re: CRS Pass packet to CPU

Re: CRS Pass packet to CPU

CRS Pass packet to CPU

Re: Script Ping (Host To IP) to the variable.

terminal - print brief column (formatting)

Re: Large Port Forwarding NAT table - Best Practices

Large Port Forwarding NAT table - Best Practices

DHCP alerts, arrays