MikroTik

enuro12

I want to call an api when i block things. If we had API actions with a few variables we could do so much more than reactive monitoring.

enuro12

I got my AC2 today! Woooooo eh?

My speed test maxed at 10mb both directions. My ISP's built in 5ghz gets 60 down and 10 up.

What gives? All default settings, nothing changed except the wifi names so i knew what was 2.4 and what was 5.8

enuro12

Any thoughts?

enuro12

Say i want to block all outbound connections not in my allowed list. ie. Facebook denied, google allowed. Then i want to get an alert anytime someone tries to access anything blocked. Who it was(client mac), and where they were going(ip/url ect). So i could then allow it via API. How can i capture t...

enuro12

Thanks! I'll give it a try.

enuro12

1. Forever is my guess. Mikrotik doesn't have separate software for different hardware, the software is the same for everything. 2. NO. Once you start doing something other than routing the data your through put drops like a rock. RBD52G-5HacD2HnD-TC IPQ-4018 IPsec throughput Mode Configuration 1400...

enuro12

My response isn't going to give you the an answer but get you thinking. I don't know how to do what you want. Your currently using your mikrotik as a traditional router with a wan/lan getting NAT'd. I think your going to have to completely change your infrastructure to get the ability to pass the IP...

enuro12

I'm looking for a router that can do 1gbs with my new fiber connection. It will log all nat traffic and other wise have little to no firewall rules.

enuro12

So i never restored anything on either radio. Just straight from the box to bridge mode. For whatever reason i discovered the far side radio would only shut down ethernet when plugged into a mikrotik RB951Ui-2HnD. If i power cycle it my laptop would connect to the ethernet cable. However in Winbox i...

enuro12

Interesting. I just mounted them and pointed them. They were never connected to anything other than laptops. In the office it worked fine, but once mounted 10 miles from each other this started. I'll get the export from the radio still left and report back.

enuro12

Alright, i finally got netinstall to re-install my os and i'm up and running again. Note to self, no more bridging all the ports together!

enuro12

BINGO!

I remember doing that....

I cannot post an export since it wont let me in the silly thing.

enuro12

It tested fine before the install. That's why I thought it was a cable issue.

Also correct directly to my laptop ethernet.

I thought this would be an anxious noon mistake.

enuro12

So i've got a couple dynadishs i've been trying to get a bridge up on. However after they initialize they immediately disable(o disconnect) Ethernet. I thought maybe the cables were the issue but i'm now standing here with a 6ft patch cable and the exact same problem. cannot connect to them via anyt...

enuro12

Thanks for the replies. Two DynaDish5's arrived today and i'll get a chance to try them out next week.

As for local power regulations 1w un licensed is the standard here in the us.

enuro12

Is the new DynaDish5 a decent solution for a 15km link?

The main goal is to bring high speed internet to the remote site. We have a 100Mb/30Mb available.

In a perfect world, is this a good place to start, or should I be looking at other ways to build this backhaul?

enuro12

Excellent Observation! Thanks. I'll try it again in the morning. You are correct, it is in Bridge, rather than AP Bridge.

enuro12

I've been fighting for the better part of the day trying to get this working. RBGrooveA-52HPn AP 192.168.10.9 RBGrooveA-52HPn Client 1 192.168.10.8 RBGrooveA-52HPn Client 2 192.168.10.10 AP and Client1 have been functioning fine for 2 years. Today i tried to add Client2. It never would work. I decid...

enuro12

Hey Guys! Just wanted to get a second opinion before i RMA this device. Seems my Ethernet in port 1 is bad. Symptoms: No ethernet on port 1 (Works fine if i Power it via port 1, and use another cable in port 2-5) Steps to correct: Changed ethernet cables Changed POE injector So i guess there is no s...

enuro12

And please consider *not* climbing a tower unless you're wearing some sort of fall arrest - You might consider borrowing some gear if you can't afford to purchase it....the surface of the earth isn't very kind to falling humans. Hey! Honestly i dont remember. I spent a bit of time trying to find a ...

enuro12

I cant seem to get above 36mb on my link at .5km. Getting support for these products is like pulling teeth...

enuro12

NV2 is what i was using previously. The MSSQL max rate was 11mb for some reason.

Any idea why i'm only seeing 40mb across my connection? With UDP packet loss on the tx

enuro12

So i've changed my protocol to nstreme and i'm reaching the full 36Mb via MSSQL.

So the only thing left now is to get a 1800ft link at full speed.

enuro12

Setup Screens

Not sure if this tells anything

enuro12

So initially i thought my problem was the same as before. However after doing some FTP transfer's i have realized my speed is pretty good for ftp, not mssql... I used the WISP Tutorial and setup my settings identical to that. The only difference is my IP Address. I made a youtube video while is conf...

enuro12

How did your long distance tests work out?

enuro12

Thanks for all the responses. This is my first time with a device that was not point and shoot.

I got the tower side (AP) side mounted today, tomorrow i hope to get the station up and see what i get. It was my first tower free climb as well. Shew!

enuro12

signal jumps between -20 and -40 which is much too strong. don't use tx-power 0, use for example 3 get them further apart, your signal is much too strong, this affects speed directly. like the article says, get the signal to be -60! the bridge setup is not a good idea in general, but that won't aff...

enuro12

YouTube link to me setting up the SXT's. I've followed the tutorial exactly as it was written.

YouTube Link

I'll make a video of my bandwidth tests tonight.

enuro12

So before i broke everything down and brought it to the office, i dropped the TX power on both devices to 0. I still got my 220Mbps between the radios. At the office my max is 200Mbps and hangs around 180. I suspect the extra distance in the open was a benefit. In any case i'm not getting over 15Mbp...

enuro12

Thanks for the response. I'll give that a test!

enuro12

What sort of signals do you get with that?

When i dropped my TX to 0, i lost connection to the client radio.

lol thats just awesome! I'll reset everything tomorrow and try again.

enuro12

spam x2

enuro12

spam

enuro12

It doesn't show -60 because i put the tx power back after it had negative performance.

And i've seen that picture all over the forum. You've posted it 3 times today.

enuro12

karma for taking the time!

enuro12

Ahh, got it. Thanks !

enuro12

I feel much less noobish now, thanks!

enuro12

Thanks for the reply.

Do scripts loop automatically or do i need to add something extra for that?

enuro12

The first thing we’re going to change is the TX power. With the radios still so close together the signals will to be too high and you’re not going to get the best results. Do the following to both SXTs: Double click on the Wlan1 in the Wireless Tables Click the Advance Mode button at the bottom ri...

enuro12

enuro12

I'm hoping this is a very simple question. I've copied this script into my 'scripts'. I click run and the counter increases by 1, however the SXT doesn't do anything. It seems i should be putting it in a loop, but i cant figure out how. =\ I've been poking around in the manual which is where i found...

enuro12

enuro12

I followed that guide from wisp and I have a full 100MB link. Is that 100Mb TCP? I've just completed that guide and i too test high on the internal tests. But the tests between the laptops connected to the link are much less... I'm very frustrated at this point. I setup the SXT's in the yard mounte...

enuro12

Thanks guys

I found that manual last night, i plan to try it today. I'll give the channels a try too.

enuro12

HA! There is the backup command i was searching for too! + Karma baby\

LMAO... i just noticed i was on this page hours ago when i did the system reset... Had i only scrolled up

enuro12

Station Wireless Configuration /interface wireless export # jan/02/1970 02:27:07 by RouterOS 5.2 # software id = Y5QH-TJ1Q # /interface wireless security-profiles set default authentication-types="" eap-methods=passthrough group-ciphers="" \ group-key-update=5m interim-update=0s ...

enuro12

Bridge Wireless Configuration /interface wireless export # jan/02/1970 02:25:36 by RouterOS 5.2 # software id = 7EHU-202S # /interface wireless set 0 adaptive-noise-immunity=none allow-sharedkey=no antenna-gain=0 area="" \ arp=enabled band=5ghz-a/n basic-rates-a/g=6Mbps bridge-mode=enabled...

enuro12

Searching for export in the "manual" just brings me to "Dude Export" =\

enuro12

Thanks, i did a couple support dumps, but i'll do those as well. Thanks!

enuro12

A little more information about my setup. These devices arrived today. I took them out of the box, and started poking around at them. I've since realized just how complex the setup is. I can also see how flexible they are. Clearly they are designed for much more than my simple p2p link. After messin...

enuro12

I've posted my results with my two devices sitting on my kitchen table in the beginners section. I was hoping to get some more help there.

I'm very glad to hear things are quiet, i was beginning to think this was a 'no new guy' forum.

enuro12

Interested in your long haul results

enuro12

Alright i'm a bit frustrated now. I bought these little babies thinking i could achieve a 100Mb link between two sites. I currently have them setup on my kitchen table, about 4ft apart. I am getting 12Mb Rx, 22Mb Tx. Using Btest > Btest from 1 laptop to the other laptop. After messing around with th...

enuro12

Sorry TSTH. Good Luck

enuro12

All 100 pcs will be connected via wireless ? Or only 1, or it is wireless backbone? What distance between the locations?

enuro12

How do you expect help without any information about your goal?

enuro12

It is impossible to tell you about 'the equipments' their are thousands of configurations. You must tell us what your goal is. Example: Connect 2 computers to the wired network. The 2 computers are located 5m from each other on the same level of the building. The 2 computers will only need a 1MB lin...

enuro12

Well i ordered two of the RB-SXT to try out. I was hoping for a warmer welcome from the experienced members.

enuro12

Seems help is scares here. Go to your local electronics dealer and purchase any wireless b/g access point or router. Unpack the unit, plug it in to your wired network and done.

If you include some details about your network i can help you further.

enuro12

Hello! I have just discovered MikroTik today on a recommendation by a DD-WRT member. I would like some recommendations for hardware for my link. My two points are 568m distance from each other. The connection is in a urban downtown environment. The 2.4ghz range is very overcrowded. 5ghz unknown. I w...

Search found 61 matches