MikroTik

walkbyfaith

The src-addresses are dynamic addresses. The clients home computers are using them to access an application behind the firewall and they are in another city with DHCP public ip addresses so, I can't add them as the src-address. As for port knocking, since they randomly access this application using ...

walkbyfaith

Hello, I have an RB422 running 6.45.3. I have a port forwarding rule as follows ;;;Remote Access ports for ABC Company chain=dstnat action=dst-nat to-addresses=192.168.100.20 to-ports=38880-38884 protocol=tcp dst-address=<IP ADDRESS OF ETH1> dst-port=38880-38884 log=no log-prefix="" This r...

walkbyfaith

/ip hotspot profile add dns-name=HUHotSpot.com hotspot-address=10.10.222.2 name=hsprof1 use-radius=yes /ip hotspot user profile set [ find default=yes ] shared-users=unlimited /ip ipsec proposal set [ find default=yes ] enc-algorithms=3des /ip pool add name=dhcp_pool4 ranges=10.10.222.10-10.10.222.2...

walkbyfaith

Hello Everyone, I have a strange situation. It's not service effecting but, now that I know about it I would like to resolve it. Below is the setup with fake IP's I have two mikrotik routers. Router A IP is 11.0.0.10 and Router B is 11.0.0.11. They are both on the same subnet which is a /22. The def...

walkbyfaith

I have an RB433 running 6.35.4. Ether1 is the WAN connection and Ether2 & Ether3 are connected to two different switches, not manageable switches. Every so often any user connected to the switches that are using ether2 and ether3 on the RB433 cannot gain internet access. When this happens I can ...

walkbyfaith

I am pinging the routers interface. So I connect to one the public wifi SSID and I am pinging the private IP interface. As I write this I realize, I will be able to do this. Sorry, I will connect another device to the other network and try to ping to it. I will let you know the result.

walkbyfaith

Hello R1CH, This is my setup. Eth1 is WAN Connection. Eth2, Eth3 and WLAN1 are all bridged together and connect to the LAN only Eth2 and WLAN1 are being used. I have setup a VAP off WLAN1, this is for the public users. WLAN1 is for private users. So, the traffic I am trying to isolate is the VAP fro...

walkbyfaith

Hello, I am attempting to isolate my Wifi connections from my LAN connection. I have setup these rules in the firewall used for Isolating them. I can get on the internet from Wifi and LAN successfully. chain=forward action=drop src-address=10.10.219.0/24 dst-address=172.16.30.0/24 log=no log-prefix=...

walkbyfaith

I am trying to use the packet sniffer, when I put in the UDP port 67 I get the following error " Couldn't Change Packet Sniffer Settings - cannot set, sniffer running(6)"

thanks for the help

walkbyfaith

Hello,
Is there a way to log the entire DHCP process from discover to acknowledge? Thanks.

walkbyfaith

Hello everyone, I have a RB433 with the latest firmware installed at a college dorm. The setup is as follows: ETH1 - internet or uplink connection ETH2 - connection to switch ETH3 - connection to switch WLAN1 - disabled no wifi off RB433 I have DHCP enabled on the RB433 and a bridge setup for eth1 a...

walkbyfaith

I have an RB433 with wpa/wpa2 aes ccm for both group and client. The clients keep getting disconnected and when I look at the logs it displays "disconnected unicast key exchange timeout". I am running RouterOS version 6.28. I've tried removing the security profiles and adding new ones with...

walkbyfaith

Hello, I have an RB433 that currently has a scope of about 252 addresses. I need to increase this scope, unfortunately the subnet is a /24 and I cannot just add more addresses to the scope. The layout is that eth1 is the internet connection with a static public ip address. eth2 and eth3 are used for...

walkbyfaith

Thanks you rextended. That did it. Thanks for your reply.

walkbyfaith

Hello, I currently have an RB433 running V6.12. I am noticing a lot of input traffic on eth1, which is the main internet connection port, going to protocol/port UDP/53 coming from the same MAC but from various IP's. I would like to block the MAC address. My question is with the firewall rule config....

walkbyfaith

Did you resolve this? Have a client with COD, same problem. NO, not as of yet. I have found that with the RB433 and using PAT(port address translation) this seems to be an issue. I have performed all the steps mentioned on various other posts but, there always seems to be a couple users that cannot...

walkbyfaith

Hello, I have a RB433 running firmware 5.26. The main internet or WAN interface is eth1. I have an R52hn wireless adapter with a wlan1 is setup with PSK and a virtual ap wlan2 setup with PSK. Randomly a problem occurs on this RB that causes stations connected to this AP to lose internet connection e...

walkbyfaith

CTrain,
When I enable UPnP do I need to just enable it, or do I need to pick interfaces? I have tried interfaces as follows:

internal --> bridge1 - which is eth2,eth3,wlan1
external --> eth1 - which is WAN connection and has static public IP assigned to it.

Thanks for the help

walkbyfaith

I have several RB433's running 5.26. This is the basic setup I have. Each RB433 is connected to the WAN via eth1 and has a static public ip address eth2,eth3 and wlan1 are on setup on a bridge and DHCP server is setup on this bridge and handing out private ip addresses, eth2 and bridge have static p...

walkbyfaith

CTrain,
I have enabled UPNP on the RB433. This is a college apartment building and several of the students have Xbox 360's, is there a way to get the port forwarding to work for all of them without knowing their private IP Addresses? Thanks.

walkbyfaith

Hello, My name is David Horvath and I am currently using RB433's in the field at a university apartment complex. I have currently 21 RB433's deployed, all with Static eth1(uplink) IPv4 addresses. On each RB433 I have setup a hotspot on a bridge, the bridge includes not only the WLAN1 but also eth2 a...

walkbyfaith

Hello, I have several RB433's running winbox version 5.26. I have hot-spot enabled on these RB433's. I also have several XBox's, PS3's and other gaming stations on the ip binding list to bypass the hotspot. I do have PCQ queues setup on the eth1 port which is the WAN uplink port so no one user can u...

walkbyfaith

Discovered the problem. I had the wireless security set to TKIP, I changed it to AES and now everything works fine.

walkbyfaith

Hello, I have an RB433 that has 2 wireless R52hn cards. One card is used setup for use as an ap bridge at 2GH B/G/N and has hotspot functionality. One this same radio card I have a virtual ap setup with WPA2 security mode. I can connect successfully to the hotspot successfully with all devices but, ...

walkbyfaith

Hello, I have a RB422 running v 5.22 and I have the rb setup for hotspot access with authentication to a remote RADIUS server. All is working well. The owner gives out the password to the guests who come into his shop. Unfortunately some guests live above this coffee shop and have started downloadin...

walkbyfaith

Hello, I have an RB433 running v5.20 and I have it setup as follows: eth1 - static IP WAN Connection eth2, eth3 and wlan1 are in a bridge and setup for hotspot - dhcp server enabled on bridge Everything is working but, I have a lot of logs from the firewall of the following: firewall,info input: in:...

walkbyfaith

I have several RB433 routerboards and wanted to know if I can download the GPS package for the RB433 and enable GPS on them? I went to the archive download section at the Mikrotik website but, could not find the GPS package there. Thanks for any help.

walkbyfaith

I have enabled UPNP for both internal and external interfaces. I did not change any other settings on the firewall. On most XBox gaming stations this works, but there are still one or two that this does not work for, they still get the message that the NAT is moderate. Strange that it is working on ...

walkbyfaith

Hello, I have several RB433 v5.19 routerboards with the following setup. eth1 - WAN interface eth2,eth3,wlan1 - on bridge1 DHCP server on bridge1 Hotspot configured on Bridge hotspot authentication to remote RADIUS server. NAT masquerate on eth1 The users connect to the RB433 and authenticate and in...

walkbyfaith

SurferTim,
Thanks for the reply, that worked.

walkbyfaith

Hello, I have a RB433 that has an outdoor ap connected to it via eth3 with DHCP server enabled on eth3 as well. I also have a connection to eth2 with DHCP enabled. Eth2 is for the wired connections and eth3 is for wireless customers. Both these ports need to have hotspot login capabilities and they ...

walkbyfaith

I have an RB433 with eth1 connected to a WAN interface with a static ip address assigned to it. eth2, eth3 and wlan1 are all on a bridge and hotspot is enabled on the bridge. Everything is working well but I have seen that the cpu usage is about 75% usage, when I went into the logs and used debug, t...

walkbyfaith

Hello, I have several RB433 units at a college community. There are about 40 users per RB433. I was wondering if there is a way to track and log the hotspot users WAN activity, as far as sites they visit, etc.. The reason is that our bandwith provider sends us messages regarding misuse of the intern...

walkbyfaith

SurferTIm, Just so I get the hardware correct. This link is to the wall wart, correct? http://www.titanwirelessonline.com/Passive-PoE-Injector-p/pe-inj-3.htm and this is to the ac power http://www.titanwirelessonline.com/18V-Power-Supply-p/pe-18vs.htm And you're using these together, correct? Also, ...

walkbyfaith

SurferTim,
You are correct. I am using the 24V power supply in the link. Do you have any 12 volt unregulated power supply suggestions? Thanks again.

walkbyfaith

I have used the ac power supply that is used on the RB433 and got the same result. The eth1 link goes up and down and eventually I can no longer ping the RB433. We have a tool similar to the wall wart that you use SurferTim and we connected to a plug with nothing connected to it so see what the resu...

walkbyfaith

Thanks omega-00. I applied the PCQ type queues as you suggested and it works. Just one more question. When a hotspot is created on a RB433 it automatically creates a queue named hs-<hotspot1> . Can I just delete this, it is never being used. Thanks.

walkbyfaith

Thanks for all of your help. I replaced the PoE injector with another one. Both are of this type: http://www.ispsupplies.com/categories/Power-Products-POE_2/POE-24-W.html It usually starts happening in a day, no particular time, pretty much random. But after reading becs article, it is exactly the s...

walkbyfaith

I have 3 RB433's that this is happening on. I have eht1 connected to WAN over PoE injector. The port just seems to shut down. I go on site and connect to the RB433 via Winbox and I can ping all LAN equipment that is pingable but, I cannot ping anything on the WAN. The LAN clients can ping the defaul...

walkbyfaith

Hello, I have an RB433 on 5.17. Eth1 is connected to WAN over PoE injector, Eth2 & Eth3 are connected to separate switches. A bridge is setup on eth2, eth3 and wlan1 with hotspot configured on the bridge. This RB433 is located at a student housing complex that does not currently have any tenants...

walkbyfaith

Thanks for the help lebowski, that worked.

walkbyfaith

I have the dude v3.6 running on a windows 7 64-bit pc. I have applied three map.png files to three network maps. When I go to export the settings, the dude just hangs and eventually gives me the following error: This application has requested the Runtime to terminate it in an unusual way. Please con...

walkbyfaith

Just some more info. I have setup a pcq queue on and RB433 for all ports. This has a 2 pcq tyes of 2M for download and upload. I create a simple queue using these queue types and it works. Users will get the 2mb bandwith but, when more users login, it will be shared equally to all. Next I created a ...

walkbyfaith

This can be closed. It was a physical problem.

walkbyfaith

Hello, I have serveral RB433's out in the field and each one has a dhcp server enabled on a bridge which consists of eth2,eth3 and wlan1. I've tested the dhcp server is working on a switch and connected 3 unifi ap's to this and they received IP addresses from the DHCP server. When we connected the R...

walkbyfaith

omega-80, Thanks for the links, they did help. I still have a question. First here is my scneario. I have a student housing complex with 30 students. The main internet connection is set at 20mb Each is given 5mb profile when the login. The RADIUS server is a remote server which when the student logi...

walkbyfaith

I have a RB433 setup for hotspot. The users are authenticated by a remote RADIUS server, once they are approved for access they are given a bandiwidth profile set by the RADIUS server. This is working fine but, in certain installations I have several users(30-40) sharing a main internet connection v...

walkbyfaith

Egate,
Thank you for your reply. When I go into the security profile there is no area for WEP, only WPA or WPA2. I know WEP is an old security mode and is easily hacked but this is where the hardware limitation is right now. This is only temporary. Thanks again for the help.

walkbyfaith

Hello, I have an RB411 that I have in station mode and would like to connect it to an ap(not mikrotik) running in WEP security mode. When I run a scan on the RB411 I can see the SSID of the AP that I would like the RB411 to connect to but, I don't know how to have it connect with a WEP Key. The reas...

walkbyfaith

Hello, I have a RB433 configured for hotspot access. I am using the login.html page on the RB433 and have a backend RADIUS server for authentication. I have a guest account setup for first time use for all users, but I would like to redirect them to another URL once they login with the guest account...

walkbyfaith

Hello, This is my general setup. I have an RB433 routerboard. eth1 - WAN connection/static public ip address eth3/wlan2 - bridged with hotpot setup on the bridge and dhcp server on bridge eth2 - dhcp on bridge - no hotspot I have a unfi ap that connects thru eth2, I am able to see the unifi ap from ...

walkbyfaith

I have the following setup as described in this link. http://wiki.mikrotik.com/wiki/SSTP#Application_Examples Under connecting remote client example. I am able to ping other devices and the local interface on the RB433 but, I cannot use winbox to connect to the remote RB433 thru the vpn. I get the f...

walkbyfaith

What would be the best setup for a vpn for clients with laptops to connect to a RB433? I would like to be able to connect to the RB433 over a VPN tunnel from a laptop and gain access to devices on the LAN side of the RB433. Thanks for the help.

walkbyfaith

I checked my settings and the hotspot that is setup is on a separate network id but, I can still ping the pc's on the eth2 and eth3? Here is my dhcp list 0 dhcp_pool 10.10.100.0/24 1 dhcp_pool1 10.10.100.100-10.10.100.200 2 wlan_pool 172.16.100.100-172.16.100.200 3 dhcp_pool2 172.16.100.100-172.16.1...

walkbyfaith

I have a RB433 with 2 R52hn radio cards setup as a wireless guest access the wireless has it's own dhcp server setup thru the RouterOS. I also have the eth1, eth2 setup as a bridge with it's own dhcp server. The gateway is eth1 and is setup for dhcp client. Is there a way to prevent the wireless use...

walkbyfaith

I have the wireless protocol set to 802.11

walkbyfaith

I have an RB433 setup as an ap bridge at the 2.4 GHZ band, the frequency is at 2427. I have a R52hn radio card installed on the RB433. I have all the eth1, eth2, eth3 and wlan1 bridged together and there is no dhcp server setup, dhcp is coming from the eth1 which is connected to the backbone Gigabit...

walkbyfaith

I have an RB433 with 2 RB411's connected thru a mesh. I can see them when I go to settings on the Dude to the RB433 IP neighbors but I wanted to know if there is a way to put the mesh on the dude map. The RB411's connect thru their wlan1 ports to the RB433 wlan1. Thanks.

walkbyfaith

Just to reply to B, Nothing went wrong with the mesh, what happened was a financial problem at the apartment complex. They have 60 UBnt routerstations in their possession and would like to use them if possible. I never really used UBnt and in helping them out if I can, would like to use this equipme...

walkbyfaith

I have a RB433 v 5.8 running in ap bridge mode. Here are my settings on the wireless Band 2Ghz - B/G/N Channel Width - 20/40/Mhz HT above Frequency - 2427 Wireless Protocol 802.11 Freq Mode : manual txpower Antenna Gain: 6 On the advanced tab Distance: indoors On the HT Tab HT Tx Chains chain 0 and ...

walkbyfaith

I have a RB433u routerboard with 2 R52hn radio cards. I have the wireless setup as a Mesh with WDS in dynamic mesh mode. Wlan2 is setup for the clients to connect to and I have a virtual AP created on wlan2 for private connection and is wpa2 protected. Eth1 is the main internet connection and has a ...

walkbyfaith

Normis, Thanks for the reply. After investigating online I see that Mikrotik is more like Linux and UBNT is more like windows. I still have about 60 of these UBNT routerstations that I would like to use if possible and mix with Mikrotik equipment. They currently are being used in a mesh network at a...

walkbyfaith

I have several ubiquiti routerstations that I would like to use. Is there a way to copy configurations from a mikrotik routerboard to a ubiquiti routerstation? Thanks for any help.

walkbyfaith

I have a RB433 with and R52hn radio card. Is there a way to setup multiple SSID's on the wlan1 interface? Thanks for the help.

walkbyfaith

No,
The RADIUS server ip is only on the RB433 not the RB411AH.

walkbyfaith

Hello, Currently this is what I have setup. 1 RB433 - ap bridge - Static IP address on eth1 on WAN side - eht2 & eth3 setup in bridge, dhcp server setup for this bridge - WLAN setup with it's own dhcp server and hotspot is setup to radius server to authenticate this setup is working fine, I get ...

walkbyfaith

I am going to be deploying some mikrotik ap's in coffee shops, bakeries, etc... They all we be using hotspots. I have several RB/433 and RB/411's with level 4 licensing. I did see there is a limitation to 20 users. Is this only specific if you're using mikrotik's user manager? Does it apply is your ...

walkbyfaith

Update. I was able to get this to work. After reading more about Mesh, I discovered that I need to setup WDS. I did this on both and set the wlan1 interface on both nodes to ap-bridge and it worked. I placed the RB411 in a room about 70ft where the signal was always poor trying to connect to the RB4...

walkbyfaith

This is an update. I was able to get a mesh setup. (1) RB433 is the mesh portal (2) RB411ah is a station connecting to the mesh portal I can ping both ways between (1) and (2) and In the Mesh FDB I can see the RB411ah is connected. (2) is receiving a DHCP ip address from (1) and I can ping to websit...

walkbyfaith

I am new to Mikrotik and I am trying to get a mesh network setup. This is the equipment I have (1) RB433/R52hn radio x 1 (should I be using 2 radio cards or is one good enough) - this would be the mesh portal This is setup in ap-bridge mode DHCP server is setup on wlan1 Eth1 port is internet connect...

walkbyfaith

Does anyone know of any PoE switches that can power the MikroTik RB/433 or RB/411 routerboards? Thanks.

walkbyfaith

I did not use any specific settings. I did not use the FQDN either. I have setup the FQDN and I am going to test to see if this is the cause of the problem. Thanks.

walkbyfaith

I've created a hotspot on an RB/433 routerboard. I have a windows xp pc and I get the hotspot login page. I login and everhting works fine. I try to use a windows 7 pc and it can't display the hotspot login page. I've tried refreshing the page and this does not work either. The only alteration I mad...

walkbyfaith

Thanks for the help alexandro. That did it.

walkbyfaith

I currently have an RB/433 setup as follows eth1 - wan connection eth2, eth3, wlan1 all bridged together and dhcp server is enabled on the bridge. I also have a hotspot setup on bridge1. wireless clients can access the wireless connection without a problem and receive the hotspot login page. I wante...

walkbyfaith

Thanks fewi for the help and the link, the link and explanation did help out. Again thanks for the reply. Below I have posted the info you requested. /ip> address print detail Flags: X - disabled, I - invalid, D - dynamic 0 address=10.10.100.1/24 network=10.10.100.0 broadcast=10.10.100.255 interface...

walkbyfaith

Well, I found a problem with a Firewall Rule. It was this one. I have this rule first 0 ;;; Allow wireless internal ip addresses out chain=input action=accept src-address-list=Internal List The internal IP address is for the wireless network which is 10.10.100.0/24 This is enabled, and when I have t...

walkbyfaith

This is the setup RB/411U eth1 - no static ip address assigned to this interface - dhcp client enabled - connected to WAN - I get a public ip address on this interface and I am able to access it via winbox with ip address wlan1 - dhcp server enabled - static ip address assigned to port 10.10.100.1 -...

walkbyfaith

Thanks so much. That worked. Thanks again for the help.

walkbyfaith

Currently I have this setup. RB/411U eth1 connected to netgear router ip address 192.168.88.2/24 dhcp client enabled on eth1 wlan1 bridged to eth1 no ip address configured WPA enabled on wlan1 clients that connect to wlan1 receive dhcp ip addresses from the netgear router which is connected to the e...

Search found 80 matches